Bingfu Zhang

Dr. Bingfu Zhang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2020 in Journal of Fluid Mechanics
Verified
Journal Article
Open access
PDF file
YZYu Zhou
Yu Zhou
DFDewei Fan
Dewei Fan
BZBingfu Zhang
Bingfu Zhang
RLRuiying Li
Ruiying Li
Bernd R. NoackBernd R. Noack
Bernd R. Noack
An artificial intelligence (AI) control system is developed to maximize the mixing rate of a turbulent jet. This system comprises of six independently operated unsteady minijet actuators, two hot-wire sensors placed in the jet and genetic programming for the unsupervised learning of a near-optimal control law. The ansatz of this law includes multi-frequency open-loop forcing, sensor feedback and nonlinear combinations thereof. Mixing performance is quantified by the decay rate of the centreline mean velocity of the jet. Intriguingly, the learning process of AI control discovers the classical forcings, i.e. axisymmetric, helical and flapping achievable from conventional control techniques, one by one in the order of increased performance, and finally converges to a hitherto unexplored forcing. Careful examination of the control landscape unveils typical control laws, generated in the learning process, and their evolutions. The best AI forcing produces a complex turbulent flow structure that is characterized by periodically generated mushroom structures, helical motion and an oscillating jet column, all enhancing the mixing rate and vastly outperforming others. Being never reported before, this flow structure is examined in various aspects, including the velocity spectra, mean and fluctuating velocity fields and their downstream evolution, and flow visualization images in three orthogonal planes, all compared with other classical flow structures. Along with the knowledge of the minijet-produced flow and its effect on the initial condition of the main jet, these aspects cast valuable insight into the physics behind the highly effective mixing of this newly found flow structure. The results point to the great potential of AI in conquering the vast opportunity space of control laws for many actuators and sensors and in optimizing turbulence.

4 October 2018 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
BZBingfu Zhang
Bingfu Zhang
KLK. Liu
K. Liu
YZYu Zhou
Yu Zhou
STS. To
S. To
JTJ. Y. Tu
J. Y. Tu
Active drag reduction of an Ahmed body with a slant angle of $25^{\circ }$ , corresponding to the high-drag regime, has been experimentally investigated at Reynolds number $Re=1.7\times 10^{5}$ , based on the square root of the model cross-sectional area. Four individual actuations, produced by steady blowing, are applied separately around the edges of the rear window and vertical base, producing a drag reduction of up to 6–14 %. However, the combination of the individual actuations results in a drag reduction 29 %, higher than any previous drag reductions achieved experimentally and very close to the target (30 %) set by automotive industries. Extensive flow measurements are performed, with and without control, using force balance, pressure scanner, hot-wire, flow visualization and particle image velocimetry techniques. A marked change in the flow structure is captured in the wake of the body under control, including the flow separation bubbles, over the rear window or behind the vertical base, and the pair of C-pillar vortices at the two side edges of the rear window. The change is linked to the pressure rise on the slanted surface and the base. The mechanisms behind the effective control are proposed. The control efficiency is also estimated.

26 February 2021 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
KLK. Liu
K. Liu
BZBingfu Zhang
Bingfu Zhang
YZY.C. Zhang
Y.C. Zhang
YZYu Zhou
Yu Zhou
The wake of an Ahmed body may be divided into high- and low-drag regimes where the rear slant angle (φ) is in the ranges of 12.5°–30° and larger than 30°, respectively. This work aims to gain a relatively thorough understanding of unsteady predominant coherent structures around an Ahmed body of φ = 35° in the low-drag regime. Extensive hot-wire, wall pressure, flow visualization and particle image velocimetry measurements have been conducted at Reynolds number based on αS is a constant 0.20, irrespective of the value of φ. A corner vortex rolling upstream is observed near the lower end of the slanted surface, whose formation mechanism and dynamical role are discussed. The Reynolds-number effect on the flow is also documented. Based on the present and previously reported data, a conceptual flow structure model is proposed for a low-drag Ahmed body, including both steady and unsteady coherent structures around the body.

1 December 2020 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
DFDewei Fan
Dewei Fan
BZBingfu Zhang
Bingfu Zhang
YZYu Zhou
Yu Zhou
Bernd R. NoackBernd R. Noack
Bernd R. Noack
A machine learning control (MLC) is proposed based on the explorative gradient method (EGM) for the optimization and sensitivity analysis of actuation parameters. This technique is applied to reduce the drag of a square-back Ahmed body at a Reynolds number Re = 1.7 × 105. The MLC system consists of pulsed blowing along the periphery of the base, 25 pressure taps distributed on the vertical base of the body, and an EGM controller for unsupervised searching for the best control law. The parameter search space contains the excitation frequency fe, duty cycle α, and flow rate blowing coefficient Cm. It is demonstrated that the MLC may cut short the searching process significantly, requiring only about 100 test runs and achieving 13% base pressure recovery with a drag reduction of 11%. Extensive flow measurements are performed with and without control to understand the underlying flow physics. The converged control law achieves fluidic boat tailing and, meanwhile, eliminates the wake bistability. Such simultaneous achievements have never been reported before. A machine-learned response model is proposed to link the control parameters with the cost function. A sensitivity analysis based on this model unveils that the control performance is sensitive to fe and α but less so to Cm. The result suggests that a small sacrifice on performance will give a huge return on actuation power saving, which may provide important guidance on future drag reduction studies as well as engineering applications.

12 May 2023 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
BZBingfu Zhang
Bingfu Zhang
DFD.W. Fan
D.W. Fan
YZYu Zhou
Yu Zhou
This work proposes a machine-learning or artificial intelligence (AI) control of a low-drag Ahmed body with a rear slant angleφ = 35° with a view to finding strategies for efficient drag reduction (DR). The Reynolds numberReinvestigated is 1.7 × 105based on the square root of the body cross-sectional area. The control system comprises of five independently operated arrays of steady microjets blowing along the edges of the rear window and vertical base, twenty-six pressure taps on the rear end of the body and a controller based on an ant colony algorithm for unsupervised learning of a near-optimal control law. The cost function is designed such that bothDRand control power input are considered. The learning process of the AI control discovers forcing that produces aDRup to 18 %, corresponding to a drag coefficient reduction of 0.06, greatly exceeding any previously reportedDRfor this body. Furthermore, the discovered forcings may provide alternative solutions, i.e. a tremendously increased control efficiency given a small sacrifice inDR. Extensive flow measurements performed with and without control indicate significant alterations in the flow structure around the body, such as flow separation over the rear window, recirculation bubbles and C-pillar vortices, which are linked to the pressure rise on the window and base. The physical mechanism forDRis unveiled, along with a conceptual model for the altered flow structure under the optimum control or biggestDR. This mechanism is further compared with that under the highest control efficiency.

1 November 2021 in Applied Mechanics Reviews
Verified
Journal Article
Closed access
PDF file
YZYu Zhou
Yu Zhou
BZBingfu Zhang
Bingfu Zhang
This is a compendium of recent progresses in the development of wake dynamics and active drag reduction (DR) of three-dimensional (3D) simple automotive models, largely focused on the generic Ahmed body. It covers our new understanding of involved instabilities, predominant frequencies, pressure distribution, and unsteady flow structures in the high- (12.5 deg < φ < 30 deg) and low-drag (φ > 30 deg) bodies and the square-back body (φ = 0 deg), where φ is the rear slant angle of the body. Various DR methods and their performances are reviewed, including open- and closed-loop controls along with machine-learning control (MLC). The involving DR mechanisms, net saving, and efficiencies are discussed. Comments are made for the areas that deserve more attention and future investigation.