17 June 2020 in Journal of Fluid Mechanics
An artificial intelligence (AI) control system is developed to maximize the mixing rate of a turbulent jet. This system comprises of six independently operated unsteady minijet actuators, two hot-wire sensors placed in the jet and genetic programming for the unsupervised learning of a near-optimal control law. The ansatz of this law includes multi-frequency open-loop forcing, sensor feedback and nonlinear combinations thereof. Mixing performance is quantified by the decay rate of the centreline mean velocity of the jet. Intriguingly, the learning process of AI control discovers the classical forcings, i.e. axisymmetric, helical and flapping achievable from conventional control techniques, one by one in the order of increased performance, and finally converges to a hitherto unexplored forcing. Careful examination of the control landscape unveils typical control laws, generated in the learning process, and their evolutions. The best AI forcing produces a complex turbulent flow structure that is characterized by periodically generated mushroom structures, helical motion and an oscillating jet column, all enhancing the mixing rate and vastly outperforming others. Being never reported before, this flow structure is examined in various aspects, including the velocity spectra, mean and fluctuating velocity fields and their downstream evolution, and flow visualization images in three orthogonal planes, all compared with other classical flow structures. Along with the knowledge of the minijet-produced flow and its effect on the initial condition of the main jet, these aspects cast valuable insight into the physics behind the highly effective mixing of this newly found flow structure. The results point to the great potential of AI in conquering the vast opportunity space of control laws for many actuators and sensors and in optimizing turbulence.
7 July 2017 in Experiments in Fluids
22 September 2016 in Experiments in Fluids
19 March 2019 in Physical Review Fluids
A bi-frequency open-loop control strategy aiming to combine both high- and low-frequency forcing effects is used to experimentally reduce the drag of a simplified car model at a slight yaw angle of . The unforced mean wake features a lateral asymmetry which induces a low base pressure footprint close to the leeward side and increases drag compared to the aligned model. Forcing is performed with pulsed jets along the windward trailing edge. High-frequency forcing acts as a time-invariant flap. The fluidic flap effect deviates the windward shear layer towards the leeward side and reduces the wake bluffness, but the lateral asymmetry of the near wake is still observed. The drag reduction related to this high-frequency forcing is about 6% with a high actuation efficiency. A modulation of the high-frequency forcing with a low-frequency component is then introduced in order to modify the mass and momentum exchange in the separating shear layer at the windward trailing edge. We find that the modulated forcing provides the ability to manipulate the mean wake orientation while maintaining the fluidic flap effect. Among all wake orientations, those reducing drag are the ones having a mean symmetric wake. The bi-frequency control strategy leads to a maximum drag reduction of 7% for the best choice of frequencies. Importantly, the bi-frequency control is more efficient than the single high-frequency forcing, the actuator requiring only half the actuation energy and presenting an actuation efficiency multiplied by 3. Finally, the physical mechanisms related to drag reduction are carefully analyzed. In particular, we show that the wake symmetrization reduces the global production of turbulent kinetic energy in the shear layers. These results open up opportunities for closed-loop control of wake asymmetries.
8 September 2016 in arXiv
We investigate open- and closed-loop active control for aerodynamic drag reduction of a car model. Turbulent flow around a blunt-edged Ahmed body is examined at $Re_{H}\approx3\times10^{5}$ based on body height. The actuation is performed with pulsed jets at all trailing edges combined with a Coanda deflection surface. The flow is monitored with pressure sensors distributed at the rear side. We apply a model-free control strategy building on Dracopoulos & Kent (Neural Comput. & Applic., vol. 6, 1997, pp. 214-228) and Gautier et al. (J. Fluid Mech., vol. 770, 2015, pp. 442-457). The optimized control laws comprise periodic forcing, multi-frequency forcing and sensor-based feedback including also time-history information feedback and combination thereof. Key enabler is linear genetic programming as simple and efficient framework for multiple inputs (actuators) and multiple outputs (sensors). The proposed linear genetic programming control can select the best open- or closed-loop control in an unsupervised manner. Approximately 33% base pressure recovery associated with 22% drag reduction is achieved in all considered classes of control laws. Intriguingly, the feedback actuation emulates periodic high-frequency forcing by selecting one pressure sensor in the optimal control law. Our control strategy is, in principle, applicable to all multiple actuators and sensors experiments.