This paper presents the results of an optimization analysis of two types of thermal fluid channels. The selected geometries were evaluated according to the criterion of the Entropy Generation Minimization method as suggested by Adrian Bejan, with reference to a smooth pipe of the same diameter. The aim of this research was to assess the effectiveness of two channels that intensify heat transfer in different ways: with an insert (disrupting the flow in the pipe core) and with internal fins (disrupting the flow at the pipe wall), and to compare the results using the same criterion: the EGM method. The tested insert consisted of spaced streamline-shaped flow turbulizing the elements fixed in the axis of the pipe and spaced at equal distances from each other. The second channel was formed by making a right-angled triangle (rib profile) on the deformation of the pipe wall perimeter. Using computer modeling, the effect of the two geometric parameters of the above-mentioned channels on the flux of entropy generated was studied. These are (a) the diameter of the disturbing element (“droplet”) and the distance between these elements for a channel with a turbulent insert, and (b) the height of the rib and the longitudinal distance between them for a finned channel. The novelty resulting from the research is the discovery that the turbulization of the flow in the pipe wall boundary layer generates significantly less irreversible entropy than the disturbance of the flow in the pipe axis by the insert.
1 January 2021 in Mechanics and Mechanical Engineering
In the present work, we study numerically freely propagating flame in the stoichiometric propane-air mixture. The adiabatic small tubes with one end fully open and the second one characterized by different degrees of opening are examined. The degree of opening of the tubes was equal to: 0% (completely closed), 25%, 50%, 75% and 100% (fully opened) of the tube cross-sectional area. Several mechanisms, such as thermal expansion of the burned gas that can leave the tube freely (fully opened left end of the tube), frictional forces and movement of the unburned mixture generated by a pressure gradient, occur simultaneously during flame propagation. As a result, a nearly-exponential dependence of flame propagation speed as a function of time is observed. For fully open right end (100%), normalized flame speed reaches about 75–80 at the end of the tubes. By partially closing the right end, this effect is delayed and reduced – for 25% of the opening normalized flame speed is about 20 for all tube diameters.