In this paper, we propose intelligent reflecting surfaces (IRS) assisted secure wireless communications with multi-input and multi-output antennas (IRS-MIMOME). The considered scenario is an access point (AP) equipped with multiple antennas communicates with a multi-antenna enabled legitimate user in the downlink at the present of an eavesdropper configured with multiple antennas. Particularly, the joint optimization of the transmit covariance matrix at the AP and the reflecting coefficients at the IRS to maximize the secrecy rate for the IRS-MIMOME system is investigated, with two different assumptions on the phase shifting capabilities at the IRS, i.e., the IRS has the continuous reflecting coefficients and the IRS has the discrete reflecting coefficients. For the former case, due to the non-convexity of the formulated problem, an alternating optimization (AO)-based algorithm is proposed, i.e., for given the reflecting coefficients at the IRS, the successive convex approximation (SCA)-based algorithm is used to solve the transmit covariance matrix optimization, while given the transmit covariance matrix at the AP, alternative optimization is used again in individually optimizing of each reflecting coefficient at the IRS with other fixed reflecting coefficients. For the individual reflecting coefficient optimization, the closed-form or an interval of the optimal solution is provided. Then, the proposed algorithm is extended to the discrete reflecting coefficient model at the IRS. Finally, some numerical simulations have been done to demonstrate that the proposed algorithm outperforms other benchmark schemes.

Millimeter wave (mmWave) system tends to have a large number of antenna elements to compensate for the high channel path loss. The immense number of BS antennas incurs high system costs, power, and interconnect bandwidth. To circumvent these obstacles, two-step hybrid precoding algorithms that enable the use of fewer RF chains have been proposed. However, the precoding schemes already in place are either too complex or not performing well enough. In this study, an equivalent channel hybrid precoding was proposed. The part from the transmitter RF chain to the receiver RF chain is regarded as equivalent channel. By reducing the dimension of channel matrix to the level of RF link number, base-band pre-coder is simply calculated from decomposing the equivalent channel matrix Hequ, which greatly reduces the complexity. Based on this novel precoding approach and convolutional neural network (CNN), a novel combiner neural network architecture was also proposed, which can be trained to learn how to optimize the combiner for maximizing the spectral efficiency with hardware limitation and imperfect CSI. Simulation results show that the proposed approaches achieve significant performance improvement.

In space-air-ground integrated networks (SAGIN), receivers experience diverse interference from both the satellite and terrestrial transmitters. The heterogeneous structure of SAGIN poses challenges for traditional interference management (IM) schemes to effectively mitigate interference. To address this, a novel UAV-RIS-aided IM scheme is proposed for SAGIN, where different types of channel state information (CSI) including no CSI, instantaneous CSI, and delayed CSI, are considered. According to the types of CSI, interference alignment, beamforming, and space-time precoding are designed at the satellite and terrestrial transmitter side, and meanwhile, the UAV-RIS is introduced for the cooperating interference elimination process. Additionally, the degrees of freedom (DoF) obtained by the proposed IM scheme are discussed in depth when the number of antennas on the satellite side is insufficient. Simulation results show that the proposed IM scheme improves the system capacity in different CSI scenarios, and the performance is better than the existing IM benchmarks without UAV-RIS, but the performance improvement is at the cost of the requirement on the elements of UAV-RIS.

This paper investigates the cooperative full-duplex device-to-device (D2D) communication underlaying a cellular network, where the cellular user (CU) acts as a full-duplex relay to assist the D2D communication. To simultaneously support D2D relaying and uplink transmission, superposition coding and successive interference cancellation are adopted at the CU and the D2D receiver, respectively. The achievable rate region and joint outage probability are derived to characterize the performance of the considered system. In consideration of the fairness between the cellular uplink and the D2D link, an optimal power allocation scheme is proposed to maximize the minimum achievable rate of them. Besides, by analyzing the upper bound of the joint outage probability, we study a suboptimal power allocation to improve the outage performance. The simulation results confirm the theoretical analysis and the advantages of the proposed power allocation schemes.

Short-term load forecasting plays a significant role in the operation of power systems. Recently, deep learning has been generally employed in short-term load forecasting, primarily in the extraction of the characteristics of digital information in a single dimension without taking into account of the impact of external variables, particularly non-digital elements on load characteristics. In this paper, we propose a joint MFF-SAM-GCN to realize short-term load forecasting. First, we utilize a Bi-directional Long Short-Term Memory (Bi-LSTM) network and One-Dimensional Convolutional Neural Network (1D-CNN) in parallel connection to form a multi-feature fusion (MFF) framework, which can extract spatiotemporal correlation features of the load data. In addition, we introduce a Self-Attention Mechanism (SAM) to further enhance the feature extraction capability of the 1D-CNN network. Then with the deployment of a Graph Convolutional Network (GCN), the external non-digital features such as weather, strength, and direction of wind, etc., are extracted. Moreover, the generated weight matrices are incorporated into the load features to enhance feature recognition ability. Finally, we exploit Bayesian Optimization (BO) to find the optimal hyperparameters of the model to further improve the prediction accuracy. The simulation is taken from our proposed model and six benchmark schemes by using the bus load dataset of the Shandong Open Data Network, China. The results show that the RMSE of our proposed MFF-SAM-GCN model is 0.0284, while the SMAPE is 9.453%,the MBE is 0.025, and R-squared is 0.989, which is better than the selected three traditional machine learning methods and the three deep learning models.

Blind modulation classification is an important step in implementing cognitive radio networks. The multiple-input multiple-output (MIMO) technique is widely used in military and civil communication systems. Due to the lack of prior information about channel parameters and the overlapping of signals in MIMO systems, the traditional likelihood-based and feature-based approaches cannot be applied in these scenarios directly. Hence, in this paper, to resolve the problem of blind modulation classification in MIMO systems, the time–frequency analysis method based on the windowed short-time Fourier transform was used to analyze the time–frequency characteristics of time-domain modulated signals. Then, the extracted time–frequency characteristics are converted into red–green–blue (RGB) spectrogram images, and the convolutional neural network based on transfer learning was applied to classify the modulation types according to the RGB spectrogram images. Finally, a decision fusion module was used to fuse the classification results of all the receiving antennas. Through simulations, we analyzed the classification performance at different signal-to-noise ratios (SNRs); the results indicate that, for the single-input single-output (SISO) network, our proposed scheme can achieve 92.37% and 99.12% average classification accuracy at SNRs of −4 and 10 dB, respectively. For the MIMO network, our scheme achieves 80.42% and 87.92% average classification accuracy at −4 and 10 dB, respectively. The proposed method greatly improves the accuracy of modulation classification in MIMO networks.