1 January 2020 in IEEE Access
In this paper, we propose intelligent reflecting surfaces (IRS) assisted secure wireless communications with multi-input and multi-output antennas (IRS-MIMOME). The considered scenario is an access point (AP) equipped with multiple antennas communicates with a multi-antenna enabled legitimate user in the downlink at the present of an eavesdropper configured with multiple antennas. Particularly, the joint optimization of the transmit covariance matrix at the AP and the reflecting coefficients at the IRS to maximize the secrecy rate for the IRS-MIMOME system is investigated, with two different assumptions on the phase shifting capabilities at the IRS, i.e., the IRS has the continuous reflecting coefficients and the IRS has the discrete reflecting coefficients. For the former case, due to the non-convexity of the formulated problem, an alternating optimization (AO)-based algorithm is proposed, i.e., for given the reflecting coefficients at the IRS, the successive convex approximation (SCA)-based algorithm is used to solve the transmit covariance matrix optimization, while given the transmit covariance matrix at the AP, alternative optimization is used again in individually optimizing of each reflecting coefficient at the IRS with other fixed reflecting coefficients. For the individual reflecting coefficient optimization, the closed-form or an interval of the optimal solution is provided. Then, the proposed algorithm is extended to the discrete reflecting coefficient model at the IRS. Finally, some numerical simulations have been done to demonstrate that the proposed algorithm outperforms other benchmark schemes.
23 July 2020 in IEEE Transactions on Microwave Theory and Techniques
This article presents an analytical and coherent design method for the generalized high-efficiency broadband parallel-circuit (PC) Class-E/F₃ power amplifier (PA). By importing the initial phase shift of the third harmonic and adding series reactive element to the load network, a free design parameter can be defined and the design space of the load network parameters are expanded. The design equations of the idealized waveforms and the optimum values of the load network components are derived in detail, and the performance of the peak drain voltage, maximum operating frequency, and power output capability can be improved. In addition, with the expanding space of load network, the generalized PC Class-E/F₃ structure exhibits broadband capability. A matching method with the real frequency technique (RFT) and the de-embedding technique is presented to design the optimal broadband matching network. To verify the validity of the proposed method, a broadband high-efficiency PA working from 1.7 to 2.6 GHz (fractional bandwidth of 42%) is designed. The experimental results of the fabricated PA present high-efficiency characteristics of 68.5%-81% drain efficiency and 62%-75.8% power-added efficiency with 38.8-40.5 dBm output power over the whole operation bandwidth.
29 August 2024 in IEEE Communications Letters
In this letter, we propose a robust beamforming and rate optimization algorithm to improve spectral efficiency and transmission robustness by applying rate-splitting multiple access (RSMA) in reconfigurable intelligent surface (RIS)-aided symbiotic radio systems. Specifically, RSMA is used to serve all primary receivers on the same spectrum resource. Then, we formulate an optimization problem to minimize the total transmit power via the phase shift matrix of RIS, the beamforming vector of the base station, and the common rate parameter. To deal with this non-convex problem, we present an iteration-based optimization algorithm based on successive convex approximation and the alternating optimization method. Simulation results demonstrate that the proposed algorithm has 17.2% reduction in transmission power and 6.58% increase in the common rate compared to the other algorithms.
2 July 2024 in IEEE Journal of Selected Areas in Sensors
Integrated sensing and communication (ISAC) can improve spectral, energy, and transmission efficiency. To overcome the impact of channel uncertainties, we investigate a robust beamforming design problem for a multiple-input single-output based ISAC system with imperfect channel state information (CSI), where a multi-antenna base station (BS) serves multiple wireless users and obtains state information of a point target. Based on bounded CSI error models, a total throughput maximization problem is formulated under the constraints of the minimum rate threshold of each communication user, sensing performance based on Cramér-Rao lower bound thresholds, and the maximum transmit power of the BS. The formulated problem with parameter perturbations belongs to a non-convex one that is challenging to solve. An iterative robust beamforming algorithm is designed to address this issue by employing S-procedure, semi-definite relaxation technique, Schur complementarity conditions, and successive convex approximation. Simulation results demonstrate that the proposed algorithm exhibits better convergence and stronger robustness.