INAMUL HASAN

INAMUL HASAN

Aerospace Engineering, Ramaiah Institute of Technology, Bengaluru, India
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2022 in Scientific Programming
Verified
Journal Article
Open access
PDF file
SZShuguang Zhang
Shuguang Zhang
KSKode Srividya
Kode Srividya
IKIsmail Kakaravada
Ismail Kakaravada
DIMITRIOS Alexios KARRASDIMITRIOS Alexios KARRAS
DIMITRIOS Alexios KARRAS
VJVishal Jagota
Vishal Jagota
ARAbdul Wahab Rahmani
Abdul Wahab Rahmani
To improve the speed of global optimization algorithm, a class of global optimization algorithms for intelligent electromechanical control system with improved filling function is proposed. By attaching the intelligent managing system improving algorithm and the filling function procedure, the algorithm can stand out from the current particular optimal solution, avoid the phenomenon of falling into the local favorable solution in the process of algorithm iteration, make the algorithm find a better solution, and improve the efficiency of solving the multiextremum global improving problem. Multiextremum-seeking is an optimal control technique that works with unknown conditions while assuming that measurements of the plant’s input and output signals are accessible. The presented work is for an electromechanical system which will handle the low accuracy and untimely tendency of conventional systems which are used in various practical applications. Few learning algorithms have been developed to explicitly optimize mean average precision (MAP) due to computational constraints. The outcomes show that the convergence of the test functions F6 and F7 is not good when the MAPID algorithm is only used for optimization. The MAPID_FF algorithm not only ensures the convergence and optimization precision of the two test functions, but also reduces the optimization time compared with the filling function method. Compared with the filling function method, the improved algorithm has higher accuracy and faster speed, and it is not simple to fall into the local optimum, so the global optimal value is more accurate.

1 January 2022 in Intelligent Automation and Soft Computing
Verified
Journal Article
Open access
INAMUL HASANINAMUL HASAN
INAMUL HASAN
RMR. Mukesh
R. Mukesh
PKP. Radha Krishnan
P. Radha Krishnan
RSR. Srinath
R. Srinath
RPR. B. Dhanya Prakash
R. B. Dhanya Prakash
In this research, the aerodynamic performance and flow characteristics of NASA SC (2)-0714 airfoil and HH02 airfoil in the helicopter main rotor are evidently analyzed. The supercritical airfoil is used in the aircraft for attaining better transonic and high-speed flow characteristics. Moreover, a specialized helicopter airfoil called HH02 is used in the Apache helicopter rotor for increasing the operational speed. As most of the high-speed helicopters are using four-bladed main rotor configuration, it is analyzed with prior attention. The lift and thrust act in different directions for the forward phase of the flight whereas the lift and thrust act in the same direction for the other phases of flight, which is analyzed in this work. The computational analysis is done by using ANSYS Fluent whereas the rotational analysis is done by using the Multiple Reference Frame (MRF) method. An analysis is carried out for different RPM of 400,600 and 800 with the combination of 0.3, 0.4 and 0.5 Mach numbers with the assistance of grid independence test. The result shows that the NASA SC (2)-0714 rotor increases the thrust of the rotor around 5% to 10% under various rotor and forward speeds. Thus, the results proves that the supercritical airfoil is highly capable of producing higher thrust and good aerodynamic characteristics.

1 February 2025 in Physics of Fluids
Verified
Journal Article
Closed access
VCVigneswaran Cm
Vigneswaran Cm
INAMUL HASANINAMUL HASAN
INAMUL HASAN
SRS. Rajkumar
S. Rajkumar
SSSUDHAGARA RAJAN SOUNDARARAJAN
SUDHAGARA RAJAN SOUNDARARAJAN
PJPrathik S Jain
Prathik S Jain
This study investigates the aerodynamic performance of a co-flow jet (CFJ) airfoil with the objective of enhancing lift and reducing drag through active flow control. National Advisory Committee for Aeronautics 0018 airfoil was employed for the computational fluid dynamics (CFD) study. This work examines the effect of slot placement, coefficient of jet momentum, and CFJ metrics namely injection velocity, injection mass flow rate, and injection height on the variation of aerodynamic coefficients. Additionally, the tradeoff between aerodynamic coefficients and associated power consumption was investigated. The study indicates that positioning injection slots near regions of minimum static pressure on the upper surface of the leading edge increases the coefficient of lift and mitigates power consumption. A maximum improvement in lift coefficient up to 30% was achieved, while the stall margin increased by 25%. The findings also indicate that CFJ configurations with higher jet momentum coefficients exhibit an improvement in lift-to-drag ratios by approximately 40% with a 15% reduction in drag in comparison with those of conventional airfoil. This research underlines the transformative potential of CFJ technology in optimizing aerodynamic performance with minimal energy impact, suggesting promising applications for enhancing aircraft efficiency and sustainability.

1 February 2025 in Physics of Fluids
Verified
Journal Article
Closed access
DBDhanya Prakash R. Babu
Dhanya Prakash R. Babu
DMD. Madhesh
D. Madhesh
INAMUL HASANINAMUL HASAN
INAMUL HASAN
MRMukesh Raju
Mukesh Raju
Minimizing drag is a critical focus in aviation, significantly influencing energy efficiency and performance. Lift-induced drag accounts for approximately 40% of total drag during cruise flight and 80%–90% during takeoff phase. Enhancing the coefficient of lift-to-drag ratio which is also termed as aerodynamic efficiency is a proven approach to reducing energy consumption in aircraft and unmanned aerial vehicles. Wingtip devices, such as winglets, offer a practical solution by mitigating induced drag generated by wingtip vortices. This study investigates the aerodynamic performance of three configurations: a plain wing, a wing with a traditional winglet, and a wing with a slotted winglet. The analysis was conducted using computational fluid dynamics software at angles of attack ranging from −4° to 12°, with velocities of 20 and 270 m/s, corresponding to Reynolds numbers of 2.5 × 106 and 3.3 × 107, respectively. Results demonstrated that the traditional winglet achieved a 4% average improvement in aerodynamic efficiency, while the slotted winglet exhibited a 3.16% enhancement over the plain wing. Energy consumption was reduced by 4% and 3.16% with traditional and slotted winglets, respectively. These findings validate the effectiveness of winglets in improving aerodynamic efficiency and provide insight for optimizing wingtip device design.

1 June 2022 in Transactions of the Canadian Society for Mechanical Engineering
Verified
Journal Article
Closed access
INAMUL HASANINAMUL HASAN
INAMUL HASAN
MRMukesh R
Mukesh R
RPRadha Krishnan P
Radha Krishnan P
SRSrinath R
Srinath R
Helicopters can be considered as any-terrain vehicles, as they can take off and land at any location. The aerodynamic characteristics of helicopters are more complicated than those of fixed-wing aircraft. The rotor is the source of lift and thrust for helicopters. The complex aerodynamic characteristics of helicopters are due to their rotational frame and variations in the velocity and pressure throughout the blades. Moreover, the airfoil undergoes phase changes because half of the phase exhibits a trailing edge toward the flow. In this study, four isolated helicopter rotor blades were analyzed using ANSYS Fluent in terms of flow in a static domain under non-rotating conditions. Supercritical airfoils used in high-speed aircraft have been found to be incredibly useful in the transonic region. They increased the critical and drag divergence Mach numbers. Incorporating supercritical airfoils in helicopter rotor blades ensures suitable flow characteristics and more than 50% efficiency compared to those of the HH02 blade in a stationary frame. Analyses were conducted for HH02 and NASA SC(2)-0714 airfoils with Mach numbers of 0.3, 0.4, and 0.5 without rotation. The post-processing results prove that the NASA SC(2)-0714 airfoil rotor achieves a better aerodynamic performance than the HH02 airfoil rotor.

7 September 2016 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
VRV. Ramji
V. Ramji
RMRaju Mukesh
Raju Mukesh
INAMUL HASANINAMUL HASAN
INAMUL HASAN
This works centers on the design of a De Laval (convergent - Divergent) nozzle to accelerate the flow to supersonic or hypersonic speeds and computational analysis of the same. An initial design of the nozzle is made from the method of characteristics. The coding was done in Matlab to obtain the contour of the divergent section for seven different exit Mach numbers viz. 2.5,3,3.5,4,4.5,5 and 5.5.To quantify variation in the minimum length of the nozzle divergent section with respect to the exit mach number, a throat of constant height (0.005m) and width (0.05m) was chosen for all the design. The area exit required for each mach no varying from 1 to 5.5 was plotted using isentropic relations and was also used to verify the exit area of the nozzle for each of those mach numbers. An estimate of the exit pressure ratio is obtained by using isentropic and normal shock relations. With this exit pressure ratio, a more refined verification is done by computational analysis using ANSYS Fluent software for a contour nozzle with exit Mach number 5.5. The spalart Allmaras and k-epsilon model were used for turbulence modeling.