Battery modelling is essential for optimizing the performance and reliability of Unmanned Aerial Vehicles (UAVs), particularly given the challenges posed by their dynamic power demands and limited onboard computational resources. This study evaluates two widely adopted Equivalent Circuit Models (ECMs), the fixed resistance model and the Thevenin model to determine their suitability for UAV applications. Using the Specific Hybrid Pulse Power Characterization (SHPPC) method, key parameters, including Open Circuit Voltage (OCV), internal resistance (Ri), polarization resistance (R1), and polarization capacitance (C1), were estimated across multiple states of charge (SOC). The models were analyzed under nine parameterization scenarios, ranging from fully average parameters to configurations where selected parameters were tied to SOC. Results indicate that the Thevenin model, with selective SOC-dependent parameters, demonstrated superior predictive accuracy, achieving error reductions of up to 4.26 times compared to the fixed resistance model. Additionally, findings reveal that modelling all parameters as SOC-dependent is unnecessary, as simpler configurations can balance accuracy and computational efficiency, particularly for UAVs with constrained BMS capabilities.
This research endeavors to present an analysis the characteristics of the power delivery and temperature between conventional energy storage systems (CESS) and hybrid energy storage systems (HESS) to aid in the development of advanced energy storage solutions for Unmanned Aerial Vehicles (UAVs). The results demonstrate that the HESS allows batteries to achieve one additional discharge cycle compared to CESS. Additionally, HESS reduces the initial current response and power delivery by 30W, enabling greater energy consumption efficiency. The average surface temperature differential between the two systems is 1.2°C and the average peak differential is 1.6°C, as the HESS exhibits a slower temperature rise during discharge two cycle to end, due to the initial assistance provided by the supercapacitor and maintain smooth surface peak temperature. The findings highlight the potential for HESS to enhance UAV performance, indicating the need for longer experiment durations, stable room temperatures, and consideration of the mission profile for more accurate data.
1 January 2025 in IET Electrical Systems in Transportation
This article discusses voltage level modifications in urban mass transit traction substations, focusing on DC railway substations, to reduce power consumption and improve energy efficiency. Substation voltage settings are usually adjusted by a skilled designer using practical judgment and design acumen. To maximize operations, all traction substation voltage levels are automatically adjusted to the same value. This arrangement works well and may not have affected the power supply system. This design often causes operations to deviate from optimal performance, perhaps reducing energy efficiency. This research seeks to determine the optimal traction substation voltage setting that minimizes total energy consumption of DC electric railways. A simulation‐based approach is applied using train movement data and voltage variation scenarios. The proposed designs are linear, V ‐shaped, and fixed‐voltage. Additionally, particle swarm optimization (PSO) is an effective way to find the best design. The Bangkok Transit System (BTS) Sukhumvit line is used for testing. Reduction by the linear framework, energy consumption may be 2.341% lower than the base case. By the PSO, the results in 30 trial test runs suggest a 6.107% energy consumption reduction from baseline.