Gelatin nanoparticles found numerous applications in drug delivery, bioimaging, immunotherapy, and vaccine development as well as in biotechnology and food science. Synthesis of gelatin nanoparticles is usually made by a two-step desolvation method, which, despite providing stable and homogeneous nanoparticles, has many limitations, namely complex procedure, low yields, and poor reproducibility of the first desolvation step. Herein, we present a modified one-step desolvation method, which enables the quick, simple, and reproducible synthesis of gelatin nanoparticles. Using the proposed method one can prepare gelatin nanoparticles from any type of gelatin with any bloom number, even with the lowest ones, which remains unattainable for the traditional two-step technique. The method relies on quick one-time addition of poor solvent (preferably isopropyl alcohol) to gelatin solution in the absence of stirring. We applied the modified desolvation method to synthesize nanoparticles from porcine, bovine, and fish gelatin with bloom values from 62 to 225 on the hundreds-of-milligram scale. Synthesized nanoparticles had average diameters between 130 and 190 nm and narrow size distribution. Yields of synthesis were 62–82% and can be further increased. Gelatin nanoparticles have good colloidal stability and withstand autoclaving. Moreover, they were non-toxic to human immune cells.

Point-of-care tests play an important role in serological diagnostics of infectious diseases and post-vaccination immunity monitoring, including in COVID-19. Currently, lateral flow tests dominate in this area and show good analytical performance. However, studies to improve the effectiveness of such tests remain important. In comparison with lateral flow tests, vertical flow immunoassays allow for a reduction in assay duration and the influence of the hook effect. Additionally, the use of carbon black nanoparticles (CNPs) as a color label can provide a lower detection limit (LOD) compared to conventional colloidal gold. Therefore, we have developed a vertical flow immunoassay for the detection of IgG against SARS-CoV-2 spike protein in human serum samples by applying a conjugate of CNPs with anti-human IgG mouse monoclonal antibodies (CNP@MAb). The vertical flow assay device consists of a plastic cassette with a hole on its top containing a nitrocellulose membrane coated with spike protein and an absorbent pad. The serum sample, washing buffer, and CNP@MAb flow vertically through the nitrocellulose membrane and absorbent pads, reducing assay time and simplifying the procedure. In positive samples, the interaction of CNP@MAb with anti-spike antibodies leads to the appearance of black spots, which can be visually detected. The developed method allows for rapid visual detection (5–7 min) of IgG vs. spike protein, with a LOD of 7.81 BAU/mL. It has been shown that an untrained operator can perform the assay and visually evaluate its results. Thus, the presented assay can be used in the further development of test systems for the serological diagnostics of COVID-19 or post-vaccination immunity monitoring.

Prussian blue nanozymes exhibit peroxidase-like catalytic activity and are therefore considered a stable and inexpensive alternative to natural peroxidases in the enzyme-linked immunosorbent assay (ELISA). In this work, we propose a robust method of Prussian blue nanozyme functionalization, which relies on the entrapment of nanozymes into albumin nanoparticles. The principle of the method is the addition of ethanol to a solution that contains albumin and nanozymes. At a high ethanol concentration solubility of albumin decreases, resulting in the formation of albumin nanoparticles loaded with nanozymes. The hydrodynamic diameter of nanoparticles was between 120 and 230 nm and depended on the nanozyme-to-BSA ratio. Encapsulation efficiency of nanozymes reached 96–99% and up to 190 μg of nanozymes were loaded per 1 mg of nanoparticles. Nanoparticles were stable at pH 5.5–7.5 and upon long-term storage in deionized water. Excellent reproducibility of the synthesis procedure was confirmed by the preparation of three individual batches of Prussian-blue-loaded BSA nanoparticles with almost identical properties. Nanoparticles were functionalized with monoclonal antibodies using glutaraldehyde cross-linking. The resulting conjugates were applied as labels in an ELISA-like assay of tumor marker prostate-specific antigen (PSA). The lower limit of detection was below 1 ng/mL, which enables measurement of PSA in the range of clinically relevant concentrations.

The influence of the production conditions on the properties of coke is considered. Coke is produced in a pilot plant at the Institute of Technical Chemistry, Ural Branch, Russian Academy of Sciences, in a 200-L reactor equipped with an air-supply valve and heating elements. The first stage in coke production is air-blowing of the batch with constant temperature rise at 10–12°C/h from 290–310°C; the air flow rate is 45–55 L/kg h. At this stage, the final air-blowing temperature and the batch composition are varied. The second stage is coking, with temperature rise at 25°C/h to 550–600°C. The batch consists of industrial air-blown pitch (ABP), modified by pitch tar (PT). Oxidation of the ABP, even with a very high final temperature (434°C), does not permit the production of isotropic coke. An analogous result is obtained on adding small portions of PT to the batch (15%). On adding >50% PT, totally isotropic coke may be produced. To obtain coke of isotropic microstructure, the optimal content of PT is 36–41%, and the final air-blowing temperature should be high (>390°C). The influence of PT on the structural parameters of the coke is associated with the formation of nonmesogenic structures on air-blowing. On coking, these structures suppress the growth of large mesophase. The isotropic coke produced has the following characteristics: limited expansion in the range 1300–2400°C; high structural strength; and optimal density. Graphite based on such coke is considerably superior to graphite based on industrial pitch coke in terms of its compressive strength, density, and electrical resistivity.

In this work, new polymers with a shape memory effect for self-healing coatings based on oligomers with terminal epoxy groups, synthesized from oligotetramethylene oxide dioles of various molecular weights, were developed. For this purpose, a simple and efficient method for the synthesis of oligoetherdiamines with a high yield of the product, close to 94%, was developed. Oligodiol was treated with acrylic acid in the presence of a catalyst, followed by the reaction of the reaction product with aminoethylpiperazine. This synthetic route can easily be upscaled. The resulting products can be used as hardeners for oligomers with terminal epoxy groups synthesized from cyclic and cycloaliphatic diisocyanates. The effect of the molecular weight of newly synthesized diamines on the thermal and mechanical properties of urethane-containing polymers has been studied. Elastomers synthesized from isophorone diisocyanate showed excellent shape fixity and shape recovery ratios of >95% and >94%, respectively.

Attention focuses on how the thermal oxidation of hydrocarbon mixtures by air injection at elevated temperatures affects the microstructure of the isotropic coke formed on subsequent...