A combination of theoretical analysis, numerical simulation and physical model experiments is used to explore the mechanism of pressure relief and roof blasting effects along the gob-side roadway. The stress and displacement along the gob-side roadway before and after blasting were investigated using discrete unit code (UDEC) software. The results demonstrated that blasting can effectively decrease the peak stress of the coal seam along the gob-side roadway and transfer it to the depth. The maximum displacement of the roof of the gob-side roadway, the coal pillar and the solid coal was reduced from 9.5, 10.8 and 4 cm to 6.5, 2 and 3 cm, respectively, after roof blasting. The experimental results showed that the movement of the overburden strata showed obvious regional characteristics after blasting which included the height of the caving zone on the broken side being 3.3 times higher than that observed on the unbroken side, while the height of the fractured zone was 0.52 times higher. The field application of roof blasting was controlled by a drilling method, micro-seismic monitoring and stress monitoring. The results showed good application effects. This research provides valuable insights for managing the stability of gob-side entries.
In practice, the bending and fracturing of heavy layers is often considered the primary cause of surface damage, leading to significant environmental impacts, whereas heavy layer-type mining-induced earthquakes are frequently overlooked. This study combines theoretical analysis, UDEC numerical simulations, and industrial experiments to investigate the dynamic behavior of heavy layers and the mechanisms through which mining-induced earthquakes trigger surface damage. It aims to demonstrate that heavy layer movement and mining-induced earthquakes cause surface damage and to develop a replicable engineering solution for seismic prevention and subsidence control in heavy layer mining areas. The results reveal that surface damage stems from the synergistic effects of heavy layer fracturing and associated mining-induced earthquakes, where bending subsidence from heavy layer fracturing is the primary driver, and mining-induced earthquakes act as a secondary factor by compressing fragmented rock pores to amplify overlying layer subsidence. Industrial tests at the 7202 working face using deep-hole roof pre-splitting blasting successfully fractured the heavy conglomerate layer, enhanced goaf bulking, and reduced the intensity of layer movement. This intervention significantly decreased the frequency and energy of mining-induced earthquakes, mitigating surface damage. These findings provide a practical framework for the integrated control of mining-induced earthquakes and subsidence in heavy layer environments.
Mining-induced seismicity caused by the fracture of extra-thick strata at high position (ETSHP) presents significant challenges in both prevention and control. This study combines theoretical analysis, numerical simulations and field data to explore the mechanisms behind seismic events induced by ETSHP during coal extraction and the mechanical interactions between ETSHP and the mining-induced "two zones" (the fractured zone and bending subsidence zone). The interaction between ETSHP and underlying strata was modeled using Reissner-Mindlin plate theory, with elastic energy calculations to predict the formation and evolution of separation spaces between ETSHP and overlying strata. The key influencing factors such as coal seam thickness, the spacing between coal seam and ETSHP, and the size of the goaf were examined. Results indicate that thinner coal seams, larger coal-rock spacing, and greater goaf lengths lead to larger separation spaces, significantly increasing the risk of mining-induced seismicity. Additionally, the study developed a comprehensive control strategy combining deep-hole roof blasting and surface hydraulic fracturing to mitigate seismic risks. The effectiveness of these techniques was validated through field monitoring, revealing their ability to reduce seismic hazards in mining operations. This research provides theoretical and practical guidance for managing seismic risks in similar conditions.