This narrative review provides a comprehensive analysis of the several methods and technologies employed to measure handgrip strength (HGS), a significant indicator of neuromuscular strength and overall health. The document evaluates a range of devices, from traditional dynamometers to innovative sensor-based systems, and assesses their effectiveness and application in different demographic groups. Special attention is given to the methodological aspects of HGS estimation, including the influence of device design and measurement protocols. Endogenous factors such as hand dominance and size, body mass, age and gender, as well as exogenous factors including circadian influences and psychological factors, are examined. The review identifies significant variations in the implementation of HGS measurements and interpretation of the resultant data, emphasizing the need for careful consideration of these factors when using HGS as a diagnostic or research tool. It highlights the necessity of standardizing measurement protocols to establish universal guidelines that enhance the comparability and consistency of HGS assessments across various settings and populations.

Marine pollution due to spillage of hydrocarbons represents a well-known current environmental problem. In order to recover the otherwise wasted oils and to prevent pollution damage, polyurethane foams are considered suitable materials for their ability to separate oils from sea-water and for their reusability. In this work we studied polyurethane foams filled with carbon nanofibers, in varying amounts, aimed at enhancing the selectivity of the material towards the oils and at improving the mechanical durability of the foam. Polyurethane-based foams were experimentally characterized by morphological, surface, and mechanical analyses (optical microscopy observation, contact angle measurement, absorption test according to ASTM F726-99 standard and compression fatigue tests according to ISO 24999 standard). Results indicated an increase in hydrophobic behavior and a good oleophilic character of the composite sponges besides an improved selective absorption of the foam toward oils in mixed water/oil media. The optimal filler amount was found to be around 1 wt% for the homogeneous distribution inside the polymeric foam. Finally, the fatigue test results showed an improvement of the mechanical properties of the foam with the growing carbon filler amount.

Glass or carbon fibre-reinforced polymer (FRP) structures have attained a relevant role in modern production thanks to their lightweight, high resistance to corrosion and fatigue, and relative ease of manufacturing complex shapes. Nevertheless, several types of defects, such as voids, matrix fractures, delaminations and impact damages, which might significantly reduce the useful life of composite-made structural components, are often difficult to be identified. Conventional non-destructive methods, such as ultrasonic testing, are routinely used to monitor composite constructions with good results. However, an inspection of large structures requires alternative and faster NDT methods. Among these, air-coupled ultrasonic testing (ACUT) and active infrared thermography (AIRT) are generally considered the most promising ones. In this paper, ACUT and AIRT have been compared by performing experimental tests on two reference composite panels with synthetic defects. Polytetrafluoroethylene (PTFE) and aluminium inserts with different sizes and located at various depths have been used as artificial defects. The relative merits and drawbacks of the two techniques have been highlighted in terms of defect size sensitivity, maximum depth that can be detected, and thermo-physical properties of the reflector. A qualitative and quantitative analysis has been carried out to evaluate the ability of the two techniques in retrieving the actual size of the subsurface defects.

Additive manufacturing (AM) is gaining relevance for the freedom it gives to designers in experimenting topologically optimized components, especially those having lattice morphology. Indeed, these are of great interest in various application fields (automotive, biomedical, etc.) because, in addition to a significant mass reduction, lattice topology (micro-scale) can be tuned to provide the final product (macro-scale) with the specific properties it needs to exhibit. However, additive manufactured lattice structures are still to be fully investigated, given the mismatch between the designed and the manufactured final product. This paper presents some preliminary results from a multi-instrument approach, grounding on non-contact measurement techniques, to characterize lattice and trabecular structures in terms of dimensional accuracy, surface morphology, stress-strain distribution and modal behavior.

Piezoelectric energy harvesters are very attractive to supply devices for remote sensing applications; however, they suffer from some limitations related to their low power generation. Recently, piezo ceramic flexible patches with high power conversion efficiency have been made commercially available. These film transducers can be suitably used to realize compact low-cost vibration energy harvesters. In this paper, the performance of a cantilever-type energy harvester based on piezo ceramic films (PCEH) have been thoroughly investigated. Different resonance configurations were obtained by varying the proof-mass attached to the free end tip of the beam. The effects of the excitation features (amplitude and frequency) on generated power and energy conversion efficiency have been evaluated. Furthermore, a rectification and regulation circuit was connected downstream to the PCEH in order to achieve a DC output. In such configuration, the influences of the resonance frequency and of the electrical load on the recharging and discharging times were also assessed.

Digital Image Correlation (DIC) provides measurements without disturbing the specimen, which is a major advantage over contact methods. Additionally, DIC techniques provide full-field maps of response quantities like strains and displacements, unlike traditional methods that are limited to a local investigation. In this work, an experimental application of DIC is presented to investigate a problem of relevant interest in the civil engineering field, namely the interface behavior between externally bonded fabric reinforced cementitious mortar (FRCM) sheets and concrete substrate. This represents a widespread strengthening technique of existing reinforced concrete structures, but its effectiveness is strongly related to the bond behavior between composite fabric and underlying concrete. To investigate this phenomenon, a set of notched concrete beams are realized, reinforced with FRCM sheets on the bottom face, subsequently cured in different environmental conditions (humidity and temperature) and finally tested up to failure under three-point bending. Mechanical tests are carried out vis-à-vis DIC measurements using two distinct cameras simultaneously, one focused on the concrete front face and another focused on the FRCM-concrete interface. This experimental setup makes it possible to interpret the mechanical behavior and failure mode of the specimens not only from a traditional macroscopic viewpoint but also under a local perspective concerning the evolution of the strain distribution at the FRCM-concrete interface obtained by DIC in the pre- and postcracking phase.