Recovering waste heat from integrated circuits of a laptop using thermoelectricity effects seems to be an appropriate process to enhance its efficiency. Thermoelectricity, as an energy harvesting process, helps to gain on both sides: financially as it reduces the energy consumption and environmentally as it minimizes the carbon footprint. This paper presents a flexible thermoelectric generator module which is developed to harvest waste heat of the laptop to power up some external loads. First, a theoretical analysis of the system is provided where both thermal and electrical models are exposed. Second, an estimation of the power density harvested by only one thermoelectric leg is given. This estimation can reach 0.01 µW/cm2 and it is confirmed by a numerical simulation based on the finite element method. Afterwards, this power density is improved to become 0.4 µW/cm2 by adding a heat sink in the cold side showing that the thermal resistances of the air and of the heat sink play a crucial role in transferring the temperature gradient to the thermoelectric (TE) material. Finally, it is indicated that the power harvested can be enough to power up portion of the circuitry or other important micro-accessories by using numerous thermoelectric modules.

Organic Rankine Cycle (ORC) is a promising solution for reducing the environmental impact of electricity production. It operates with waste heat from industrial processes and uses low and medium-temperature heat sources. The originality of this work lies not only in conducting an energy analysis of basic and regenerative ORC but also in performing exergy analysis to identify the processes responsible for exergy destruction and losses. It also compares both configurations regarding energy efficiency, exergy efficiency, network, heat required, and exergy destruction rate. Matlab Software runs the simulation using the Coolprop open-source library. These parametric investigations and thermodynamic modelings were undertaken on six working fluids (R113, R134a, R600, R290, R1234yf, and HFE-143 m). Results show a maximum improvement of 17.8% in thermal efficiency and 17.6% in exergy efficiency when transitioning from the basic to the regenerative configuration. Furthermore, the regenerative configuration has about 43% less exergy destruction compared to the basic configuration.

A significant amount of mechanical and thermal energy is lost when typing on a laptop keyboard. To address this, hybrid energy harvesters must increase the generated power density and mitigate energy fluctuation issues. This paper explores the potential enhancement of energy harvesting by combining thermoelectric and piezoelectric effects within a multilayered structure integrated into a laptop keyboard button. Through numerical simulation, the study assesses how these two behaviors can synergistically increase the power density generated by the hybrid device. The focus is on optimizing energy efficiency by harnessing the heat losses from integrated circuits and the mechanical stresses due to the act of typing. The point is to refine the design of such a system to maximize the conversion of ambient energy into electricity. The findings indicate that the hybrid structure combining both piezoelectric and thermoelectric effects, effectively captures energy from a laptop keyboard, producing a substantial amount of electricity. This investigation shows that the generator can produce up to 2.07 mW of power using PU-40%PZT as piezoelectric material and an additional 71.93 μW through the PEDOT: PSS as thermoelectric material from a single keystroke when pressed and heated. This study underscores the potential for improving energy-harvesting efficiency in laptop keyboards, contributing to more sustainable and energy-efficient electronic devices.