The effect on the physical, mechanical, and antibacterial properties of films composed of alginate-chitosan with the incorporation of oregano (EOO) or thyme (EOT) essential oils was evaluated. These films showed a thickness between 37.7 and 38.2 µm, with no significant differences for essential oil content. Water vapor permeability decreased from 4.03 (oil-free film) to 1.65 (g/msPa) × 10−9 in 3% EO. Mechanical properties reflected a reduction in tensile strength (TS) from 73 (oil-free films) to values between 34 and 38 MPa with 3% EO, while elongation (E%) increased from 4.8% to 10.4–11.8%. Regarding antibacterial capacity, as the concentration of essential oil increases, the antibacterial capacity also increases. On average, the increase from 1.0% to 3.0% of EOO increased the antimicrobial capacity against Gram-negative and Gram-positive bacteria. EOO outperformed EOT against E. coli and L. monocytogenes. In addition, films with 2–3% EOT showed a significant dark yellow color compared to the control. These results suggest that films with the addition of oregano and thyme essential oils can be promising for food packaging applications with the ability to improve food safety and increase product shelf life by achieving functional packaging characteristics.
Ulex europaeus is one of the most abundant and aggressively invasive plants on the world. Its fibres, which can be isolated using an alkaline pulping process, have been successfully thermo-pressed into high-density fibreboards without any type of binder. The influence of the bioorganic and crystalline components on the product was investigated using crystallographic, thermo-analytical, and mechanical techniques. Cellulose was predominantly an Iβ polymorph, more common in hardwood, but the composition of the material was typical of softwood. Both the crystallinity in the fibres and the average domain size of cellulose increased during thermo-pressing. Notwithstanding that the residual lignin was present in a small amount, this promoted the cohesion of fibres by improving hydrolysis and adhesion properties. The best overall properties were observed in the pressed products of 1030 ± 38 kg/m3, showing an elastic modulus of 4.31 ± 0.26 GPa, with a modulus of rupture of 26.5 ± 1.3 MPa. These results serve as the basis to transform the invasive species into a fully non-toxic added-value resource.
As the southernmost country in Latin America, Chile has more than 12 cities on alert for particle pollution. These warnings are issued according to the air quality index, which is partly based on the concentration of coarse and fine particles. Coupled with this, there is also a significant need to use renewable energy for heating. This study describes the production of pellets using Eucalyptus nitens (H. Deane & Maiden) Maiden sawdust for use as a heating fuel. Pinus radiata D. Don was also included to produce the profile that is required for commercial-grade fuel pellets. Finally, we also suggest the use of sodium lignosulfonate as a natural binder to complement the low adhesiveness of the main raw material (E. nitens), as well as enhance the calorific value of the mixture. The results reveal that the different mixtures of eucalyptus and pine were all satisfactory, regardless of their proportions. The pellets made with sodium lignosulfonate proved to have a high calorific value, making them an attractive product; however, the formulations also had a high level of ash content (1.15% to 1.85%), which is close to the limit allowed by international standards.
1 December 2019 in Revista Tecnica De La Facultad De Ingenieria Universidad Del Zulia