This study aims to investigate the influence of clay mineral content on the rheological properties and long-term deformation stability of clays, and to establish a unified model capable of quantitatively describing the nonlinear rheological behavior of clays with different mineral compositions. Direct shear rheological tests were conducted on specimens prepared with different mixing ratios of bentonite, kaolin, and quartz. Combined with micro-mechanism analysis, the controlling factors of clay rheological behavior were explored. The experimental results show that the creep stress threshold, elastic viscosity, and average plastic viscosity decrease significantly with increasing clay mineral content. The rheological deformation exhibits distinct nonlinear characteristics, and clay mineral content plays a controlling role in the rheological behavior. Based on experimental and mechanistic analysis, a unified rheological model was established, which reflects the material origin of rheology and captures nonlinear rheological characteristics. This model can predict the entire time-history mechanical behavior of clays with different mineral compositions across the three stages of instantaneous deformation, decay rheology, and steady-state rheology under different shear stress levels using a single set of parameters. Validation was performed through direct shear rheological tests under 50 working conditions for five types of clay specimens, demonstrating good consistency between the model calculations and experimental results. The unified rheological model reveals the material origin and physical essence of clay rheology, demonstrates high universality, and advances the understanding of the influence of mineral composition on rheology from the current phenomenological qualitative description to quantitative calculation for the first time, significantly enhancing its engineering application value. This provides a more reliable tool for predicting long-term deformation and assessing the stability of clay foundations.

Joint connections are critical to the overall performance of prefabricated structures. This paper proposes a novel reverse-rotation locking sleeve connection method, designed to ensure the safety of joint engineering while optimizing construction processes, improving operational efficiency, and endowing the joints with excellent seismic energy dissipation performance. To evaluate the performance of this connection method, quasi-static tests under displacement-controlled lateral loading were designed and conducted on three reinforced concrete column specimens (Specimen A: conventional reinforcement–cast-in-place monolithic; Specimen B: conventional reinforcement–reverse-rotation locking sleeve connected; Specimen C: enhanced reinforcement–reverse-rotation locking sleeve connected). The failure modes, hysteretic characteristics, skeleton curves, ductility, energy dissipation capacity, load-bearing capacity, and stiffness degradation patterns of the specimens were systematically examined. The results indicate that Specimen B exhibited the most severe damage extent, while Specimen A demonstrated the best integrity; in contrast, Specimen B showed significant and rapid degradation in energy dissipation capacity during the intermediate-to-late stages of testing; the hysteretic curves of Specimens B and C were full in shape, without obvious yield plateaus; the skeleton curves of all specimens exhibited S-shaped characteristics, and the peak loads of Specimens A and C corresponded to a lateral displacement of 21 mm, while that of Specimen B corresponded to a lateral displacement of 28 mm; compared to the cast-in-place monolithic Specimen A, the reverse-rotation locking sleeve–connected Specimens B and C showed increases in ultimate load under positive cyclic loading by 18.7% and 5.5%, respectively, and under negative cyclic loading by 40.8% and 2.0%, respectively; the ductility coefficients of all three specimens met the code requirement, being greater than 3.0 (Specimen A: 5.13; Specimen B: 3.56; Specimen C: 5.66), with Specimen C exhibiting a 10.3% improvement over Specimen A, indicating that the reverse-rotation locking sleeve–connected specimens possess favorable ductile performance; analysis revealed that the equivalent viscous damping coefficient of Specimen C was approximately 0.06 higher than that of Specimen A, meaning Specimen C had superior energy dissipation capacity compared to Specimen A, confirming that the reverse-rotation locking sleeve connection can effectively absorb seismic energy and enhance the seismic and energy dissipation characteristics of the specimens. The load-bearing capacity degradation coefficients of all specimens fluctuated between 0.83 and 1.01, showing an initial stable phase followed by a gradual declining trend; the stiffness degradation coefficients exhibited rapid initial decline, followed by a deceleration in the attenuation rate, and eventual stabilization. This indicates that the reverse-rotation locking sleeve-connected specimens can maintain relatively stable strength levels and favorable seismic performance during the plastic deformation stage.