Exploiting hand gestures for non-verbal communication has extraordinary potential in HCI. A data glove is an apparatus widely used to recognize hand gestures. To improve the functionality of the data glove, a highly stretchable and reliable signal-to-noise ratio sensor is indispensable. To do this, the study focused on the development of soft silicone microchannel sensors using a Eutectic Gallium-Indium (EGaIn) liquid metal alloy and a hand gesture recognition system via the proposed data glove using the soft sensor. The EGaIn-silicone sensor was uniquely designed to include two sensing channels to monitor the finger joint movements and to facilitate the EGaIn alloy injection into the meander-type microchannels. We recruited 15 participants to collect hand gesture dataset investigating 12 static hand gestures. The dataset was exploited to estimate the performance of the proposed data glove in hand gesture recognition. Additionally, six traditional classification algorithms were studied. From the results, a random forest shows the highest classification accuracy of 97.3% and a linear discriminant analysis shows the lowest accuracy of 87.4%. The non-linearity of the proposed sensor deteriorated the accuracy of LDA, however, the other classifiers adequately overcame it and performed high accuracies (>90%).
In this paper, we investigate ultrasonic guided wave (GW) sensing performance of a magnetostrictive composite patch sensor (MCPS) in use of a structural health monitoring system for metallic plates. A composite patch of the MCPS consisted of magnetostrictive powders and binding epoxy, where flake- and granular-type Galfenol and spherical nickel particles were considered to examine the effect of particle shape on sensing capability and directional sensitivity. Galfenol flakes with the surface parallel to the (200) crystallographic planes exhibit good field sensitivities in magnetic and magnetostrictive properties when an in-plane field is applied. Shape anisotropy disappears for the conventional spherical shape, accompanying with a large magnetizing field and poor field sensitivity. The 60-kHz GW was successfully captured by the three different MCPSs. Among them, the MCPS with the Galfenol flakes showed the best sensing performance because of their excellent field sensitivities in magnetization and magnetostriction. In addition, the composite patch was configured into a uniaxial comb shape to promote the magnetic shape anisotropy feature of the magnetostrictive patch by itself. Due to the unique configuration of the Galfenol composite patch, the equivalent MCPS presented outstanding directional sensitivity for the GWs propagating along the orientation of the comb fingers.
12 April 2022 in ACS Applied Materials & Interfaces
This paper presents the preliminary evaluation results of a magnetorheological elastomer (MRE) patch fabricated by oriented flake-type Fe-Ga alloy (Galfenol) particles bound in a silicone polymer matrix. A force/pressure sensor, based on the Galfenol MRE patch, was developed to verify the advantages of the MRE with magnetically aligned Galfenol flakes. Hall effect sensors embedded in the MRE sensing device detect the change of magnetic flux density due to the deformation of the Galfenol MRE patch induced by an externally applied force with non-magnetic disturbance. The Galfenol flakes are standing up and well aligned to the out-of-plane of the MRE patch using a 1 in diameter permanent magnet, parallel to the applied force direction to improve sensing performance and sensitivity. It was measured at ~105 mV in the sensor response to a thumb pressure, which exhibited five times higher sensing performance compared to that of another MRE patch with the Galfenol flakes aligned to the in-plane direction.