David Bowen

David Bowen

Auto-generated profile, based on publicly available information

David Bowen

Laboratory for Physical Sciences, College Park, MD 20740, USA

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 November 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
DBDavid Bowen
David Bowen
DBDebtanu Basu
Debtanu Basu
For inductor and transformer circuit components that operate at higher frequencies, the existence of parasitic capacitance due to the winding structure determines the device's self-resonance frequency. It is desirable to have precise design and manufacturing control over the winding structure to properly control this capacitance for reduced manufacturing variability, suggesting lithographic or computer numerical controlled (CNC) fabrication. Lithographic or CNC methods, however, reduce the possible number of winding turns due to the high aspect-ratio of vias, limiting the device inductance. A 3-D printing technology offers the opportunity to increase the aspect-ratio limitation by fabricating only a thin layer at one time. In this paper, the process of 3-D printing transformer structures was explored with multiple variations. A Voxel8 printer was mostly used, with the ability to print plastic as well as conductive silver paste. Commercial and custom MnZn ferrites were used as core materials, as well as printed magnetic polylactic acid (PLA) plastic using a dual-extruder MAKEiT Pro-M printer. Windings were fabricated by either silver paste deposition interleaved with plastic layers or post-fabrication silver ink injection. It was found that interleaved silver paste deposition produced very low resistance windings (high quality factor inductor) when compared with injected silver ink but had a high probability of shorting windings. Injected silver ink windings were found to have higher reliability only when the parts are properly printed liquid tight. Inductances were in agreement with theoretical predictions for most fabricated devices, and resistances were much higher for injected silver ink windings than interleaved printed windings. The best broadband transformer performance, which is an optimal low winding resistance and high mutual inductance, was found for a 36 mm outer diameter, 23 mm inner diameter, and 10 mm-thick MnZn ferrite core with an eight-turn printed winding.

12 April 2022 in ACS Applied Materials & Interfaces
Verified
Journal Article
Closed access
BYByungseok Yoo
Byungseok Yoo
DBDavid Bowen
David Bowen
Nathan LazarusNathan Lazarus
Nathan Lazarus
DPDarryll Pines
Darryll Pines

28 June 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
DBDavid Bowen
David Bowen
DBDebtanu Basu
Debtanu Basu
CKCharles Krafft
Charles Krafft
IMIsaak Mayergoyz
Isaak Mayergoyz
To reduce manufacturing variability in broadband ferrite-core magnetic components such as Ethernet transformers, there is great industry interest in the embedding of the core materials within a planar substrate and fabricating the windings using high-precision photolithography. An embedding process has been previously developed, and found to impose design restrictions on embedded devices which can be feasibly fabricated. It was previously found that a racetrack core shape (toroidal halves joined by straight legs) allows he most efficient use of area to embed multiple magnetic devices with maximum inductance. In this research, three different sizes of racetrack shaped cores were fabricated from bulk ferrite. The racetrack cores were then embedded within printed circuit board substrate, wound as transformers, and measured to evaluate bandwidth and inductance. It was found that the transformer mutual inductance was significantly reduced through the embedding process. However, the devices were found to exhibit excellent broadband coupling behavior. Certain designs of transformers met the inductance and bandwidth requirements of 100 and 1000Base-T Ethernet.

10 July 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
DBDavid Bowen
David Bowen
GSGeorge Stackhouse
George Stackhouse
Many applications in communications and power electronics demand inductive components that operate at high frequency or a broad range of frequencies. For applications requiring miniature devices with large inductance values, most often the components are manufactured imprecisely in the traditional method where magnetic cores are wound with fine gauge wire. To achieve the best high-frequency performance, there is a desire to use a practical manufacturing method that removes the imprecision of wire winding. In this paper, a unique 3D laser exposure system is used to direct-write conformal winding patterns on the surface of MnZn ferrite toroids. The toroidal helix windings were fabricated by both an additive laser direct structuring (LDS) process and a subtractive laser-written mask-and-etch process. Both methods were performed on both enamel-coated ferrites and bare ferrites. The performance and equivalent circuit model parameters of the transformers were measured up to 1.5GHz and will be presented. The transformers fabricated on the enamel-coated cores were found to have comparable or better inductances and broadband coupling than wire-wound transformers of matching construction.

19 January 2010 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
DBDavid Bowen
David Bowen
IMIsaak Mayergoyz
Isaak Mayergoyz
CKCharles Krafft
Charles Krafft
The unique features of Ethernet transformers are reviewed, and novel testing techniques for identification of lumped parameters of equivalent circuits are presented. To account for the distributed nature of the cross-winding and intrawinding capacitances, novel distributed models for electromagnetic analysis of Ethernet transformers are presented.

28 January 2016 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
DBDavid Bowen
David Bowen
CKCharles Krafft
Charles Krafft
IMIsaak Mayergoyz
Isaak Mayergoyz
The maximization of bandwidth in broadband magnetic devices, done reliably in mass production, has led to a strong industry interest in substrate embedded ferrite core materials with windings fabricated by photolithography. Ferrites, when embedded within a substrate, can lose significant magnetic permeability due to stress from the cured bonding adhesive. In this paper, an experimental survey is conducted, encapsulating sample ferrites in various types of bonding adhesive and measuring the change in the ferrite core's inductance. The adhesives include epoxies, cyanoacrylates, polyurethanes, and silicone sealants, and each adhesive is evaluated on curing procedural limitations, bonding strength, and resulting loss in inductance when used as a ferrite encapsulant. Though tradeoffs exist, the best choice based on bonding strength and minimal loss of inductance was found to be a low shrinkage, rigid epoxy.