Train operators report low adhesion in autumn, which they suspect is caused by fallen leaves on a track surrounded by forest and farmland. To investigate and quantify this effect, vehicle tests have been performed in autumn on a track partially surrounded by forest. To also investigate the influence of different weather conditions, the tests were performed on a day with sunny weather and one with high humidity in the morning and drizzle at noon. The results were then compared to other tests and different creep force models from the literature. The results showed a significant influence of the surrounding forest on the traction especially in sunny weather.
22 December 2023 in Swedish Aerospace Conference, FT2025
Nowadays, the digitalization of large-scale railway infrastructure systems is a major trend, which helps to reduce the life-cycle costs of the railway transportation. For this purpose, the Digital Twin (DT) technology can be used to interoperate different digital data and models, belonging to the railway infrastructure system, in a virtual platform for predictive maintenance, diagnostics and condition monitoring in the railway sector. However, the simulation models of the infrastructure system are tool-dependent, lack ease-of-use and platform compatibility. Therefore, we have to customise them in order to make them more representative and then integrate easily and tool-independently into the DT platform. For this purpose, we propose to use the Functional Mock-up Interface (FMI) and System Structure Parameterization (SSP) technologies as open interface standards between the models and software tools. In this work, we demonstrate the application of the FMI and SSP standards separately for two use cases, which include a multibody simulation (MBS) model of a railway vehicle and residual life time (RLT) calculation of a steel bridge.
Severe changes in the profiles of the crossing nose are caused by large dynamic contact forces. To predict these forces as well as the profile evolution, the Whole System Model (WSM) was developed. However, it uses computationally expensive FE simulations. As a replacement, the semi-physical plasticity and wear model (SPPW) has been developed, thus majorly enhancing the overall performance of the WSM. The SPPW considers the influence of wear, plasticity, and wheel-profile-related effects. Its results have shown an overall good correlation with FE results, laboratory data for different materials, and field data from a real crossing. Due to the semi-physical nature of the model, the required computational time for the predictions was significantly reduced compared to FE simulations: minutes instead of weeks. The SPPW will be useful for time-efficient rail damage prediction, like wear and plastic deformation, and, as part of the WSM, contribute to a fast holistic track damage prognosis.
Like any other industry the railway sector undergoes greattransformations. To maketransportation by rail more sustainable and affordableinfrastructure, maintenance is key.However, this needs a managed and collective effort of manyplayers in order to make this efficientand easily accessible to experts of many different fields:Measurement experts, Simulation experts and Engineers whoperform the maintenance. In this work, we present a marketplace which leverages modern technologies and standardslike GAIA-X, Functional Mock-up Interface (FMI),Distributed Co-Simulation Protocol (DCP) or SystemStructure and Parameterization (SSP) to provide accessibleand easy to use services and retrieve crucial data fromother providers, while protecting sensitive data andknow-how. This market place is developed under the Umbrellaof the ERJU of the European Union. This work is an updateof our publication in Eisenbahn Ingenieur Kompendiumm 2024and contains several additions regarding the implementationand the usage of Modelica standards. A working prototypewill be available in 2026.