Jiale Wang

Mr. Jiale Wang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2025 in Sensors
Verified
Journal Article
Open access
PDF file
JWJiale Wang
Jiale Wang
XCXiaohua Che
Xiaohua Che
WQWenxiao Qiao
Wenxiao Qiao
STShengyue Tao
Shengyue Tao
QZQiqi Zhao
Qiqi Zhao
Transducers used in acoustic logging while drilling (ALWD) must be mounted on a drill collar, and their radiation performance is dependent on the employed mounting method. Herein, the complex transmitting voltage response of a while-drilling (WD) monopole acoustic source was calculated through finite-element harmonic-response analysis. Subsequently, the acoustic pressure waveform radiated by the source driven by a half-sine excitation voltage signal was calculated using the complex transmitting voltage response. The calculation results were compared with those obtained using finite-element transient analysis to verify the accuracy of the calculation method. The influence of transducer-mounting methods on the radiation performance of the monopole acoustic source was examined by modifying the material and structural dimensions of the coupling medium between the transducer and drill collar as well as the material and thickness of the protective cover. Numerical simulations were performed, and a transducer-mounting method suitable for ALWD was proposed based on the simulation results. Results showed that soft rubber (as the coupling material; thickness = 2 mm) enabled the WD monopole acoustic source to radiate robust acoustic energy in an infinite fluid. Increasing the height of the coupling material enhanced the radiated acoustic energy and reduced axial vibrations on the drill collar. The radiated acoustic pressure signal was unaffected by a steel protective cover (thickness = 0.5 mm). Conversely, increasing the cover thickness reduced the energy of the radiated acoustic signal. With increasing pulse width of the half-sine excitation voltage signal, the amplitude of the radiated acoustic pressure of the transducer initially increased and then declined, reaching a maximum at a pulse width that was 0.6 times the resonant period. Overall, the findings help in designing acoustic-source structures and excitation signals for ALWD tools.

2 December 2022 in Sensors
Verified
Journal Article
Open access
PDF file
JLJunqiang Lu
Junqiang Lu
JHJiyong Han
Jiyong Han
JWJinping Wu
Jinping Wu
XCXiaohua Che
Xiaohua Che
WQWenxiao Qiao
Wenxiao Qiao
XCXu Chen
Xu Chen
Ultrasonic imaging logging can visually identify the location, shape, dip angle and orientation of fractures and holes. The method has not been effectively applied in the field; one of the prime reasons is that the results of physical simulation experiments are insufficient. The physical simulation of fracture and hole response in the laboratory can provide a reference for the identification and evaluation of the underground geological structure. In this work, ultrasonic scanning experiments are conducted on a grooved sandstone plate and a simulated borehole and the influence of different fractures and holes on ultrasonic pulse echo is studied. Experimental results show that the combination of ultrasonic echo amplitude imaging and arrival time imaging can be used to identify the fracture location, width, depth and orientation, along with accurately calculating the fracture dip angle. The evaluated fracture parameters are similar to those in the physical simulation model. The identification accuracy of the ultrasonic measurement is related to the diameter of the radiation beam of the ultrasonic transducer. A single fracture with width larger than or equal to the radiation beam diameter of the ultrasonic transducer and multiple fractures with spacing longer than or equal to the radiation beam diameter can be effectively identified.