The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used to evaluate the azimuthal character of borehole formation. In this paper, a 3D finite difference method was used to simulate the acoustic fields in a fluid-filled borehole generated by a traditional monopole source and a phased arc array. Acoustic waveforms were presented for both cases. The analysis of the simulated waveforms showed that different from the monopole source, the acoustic energy generated by the phased arc array transmitter mainly radiated to the borehole in a narrow azimuthal range, which was the key technique to implement azimuthal acoustic well logging. Similar to the monopole source, the waveforms generated by the phased arc array in the fluid-filled borehole also contain compressional (P) waves and shear (S) waves refracted along the borehole, which is the theoretical foundation of phased arc array acoustic well logging.
Acoustic waves enter a rock formation from a borehole and are reflected or scattered upon encountering a geologic structure. Consequently, we obtain the structure location represented by the azimuth and distance from the borehole using the acoustic reflection or scattering. Downhole acoustic measurements with the azimuthal resolution are realized using an azimuthal acoustic receiver sonde composed of several arcuate phased array receivers. Eight sensors distributed evenly across the arcuate phased array receiver can record acoustic waves independently; this allows us to adopt the beamforming method. We use a supporting logging tool to conduct the downhole test in two adjacent fluid-filled boreholes, for validating the evaluation of the geologic structure using scattered P-waves. The test results show the multi-azimuth images of the target borehole and the azimuthal variation in scattering amplitudes. Thus, we obtain the precise location of the target borehole. Furthermore, the measured values of the target borehole are consistent with the actual values, indicating that we can accurately evaluate a near-borehole geologic structure with scattered P-waves.
Better well logging techniques for geologic investigations are urgently needed to identify and evaluate complex reservoirs. We describe a new type of 3D transmitter station with corresponding circuits and bodies. They can be used in a promising new technique of acoustic reflection well logging, that features better azimuthal detection capabilities, as well as better investigation depth. The transmitter stations consist of three-level subarrays that can radiate acoustic energy in any required azimuth of 3D space by circularly exciting various combinations at different levels. We tested the 3D acoustic transmitter stations and obtained laboratory directivity measurements with the 3D acoustic transmitter stations for the first time. The results show that the 3-dB beam width in the horizontal plane ranges from 59° to 67° as a result of phase-delayed excitation. The main beam is steered in the vertical plane at a deflection angle that ranges from 0° to 16° when the delay time of the excitation pulse between each pair of adjacent arc arrays is gradually adjusted. The 3-dB beam width is equal to 11°, whereas the deflection angle in the vertical plane is equal to 14°. Each of the four third-level subarrays in the same circumferential direction display consistent horizontal and vertical directivities, thus satisfying the requirements of azimuthal acoustic reflection logging.
17 February 2019 in Geophysical Journal International
In actual monopole acoustic logging-while-drilling (LWD), the acquisition of formation velocities is rather difficult because of a strong collar wave interference. In this study, a method is proposed to enhance the amplitudes of formation gliding waves in an LWD borehole, based on the directional radiation technology of linear phased array (LPA) acoustic transmitters. Waveforms in the LWD borehole generated by a monopole acoustic transmitter and LPA acoustic transmitters are numerically simulated using the finite difference method. The influence of the LPA parameters on the various waves in the LWD borehole is also analysed. The simulation results show that the guided waves in the LWD borehole generated by the LPA acoustic transmitter have the same type but different relative amplitudes compared to those generated by the monopole transmitter. The angular width and deflection angle of the main radiated acoustic beam in the borehole can be controlled by adjusting the LPA parameters. As the delay time between the excitation signals applied to adjacent elements is increased, the deflection angle of the main radiated acoustic beam in the borehole satisfies the generation conditions for the gliding compressional (P) and shear (S) waves, successively. When the delay time is set such that the deflection angle is equal to the first (or second) critical angle of the formation, the amplitude of the gliding P (or S) wave is greatly enhanced. Moreover, the amplitude of the gliding P (or S) wave increases linearly as the element number increases under such conditions. Therefore, compared to the monopole acoustic transmitter, the LPA acoustic transmitter can be utilized to effectively improve the reliability of the acoustic LWD tool in measuring formation velocities. The present study establishes a theoretical foundation for next-generation acoustic LWD tool development.
Transducers used in acoustic logging while drilling (ALWD) must be mounted on a drill collar, and their radiation performance is dependent on the employed mounting method. Herein, the complex transmitting voltage response of a while-drilling (WD) monopole acoustic source was calculated through finite-element harmonic-response analysis. Subsequently, the acoustic pressure waveform radiated by the source driven by a half-sine excitation voltage signal was calculated using the complex transmitting voltage response. The calculation results were compared with those obtained using finite-element transient analysis to verify the accuracy of the calculation method. The influence of transducer-mounting methods on the radiation performance of the monopole acoustic source was examined by modifying the material and structural dimensions of the coupling medium between the transducer and drill collar as well as the material and thickness of the protective cover. Numerical simulations were performed, and a transducer-mounting method suitable for ALWD was proposed based on the simulation results. Results showed that soft rubber (as the coupling material; thickness = 2 mm) enabled the WD monopole acoustic source to radiate robust acoustic energy in an infinite fluid. Increasing the height of the coupling material enhanced the radiated acoustic energy and reduced axial vibrations on the drill collar. The radiated acoustic pressure signal was unaffected by a steel protective cover (thickness = 0.5 mm). Conversely, increasing the cover thickness reduced the energy of the radiated acoustic signal. With increasing pulse width of the half-sine excitation voltage signal, the amplitude of the radiated acoustic pressure of the transducer initially increased and then declined, reaching a maximum at a pulse width that was 0.6 times the resonant period. Overall, the findings help in designing acoustic-source structures and excitation signals for ALWD tools.