Purpose: The purpose of this study is to optimize multilayer vacuum thermal insulation (MLI) of modern high-weight spacecrafts. An adequate mathematical simulation of heat transfer in the MLI is impossible if there is no available information on the main insulation properties. Design/methodology/approach: The results of experiments in thermo-vacuum facilities are used to re-estimate some radiative properties of metallic foil/metalized polymer foil and spacer on the basis of the inverse problem solution. The experiments were carried out for the sample of real MLI used for the BP-Colombo satellite (ESA). The recently developed theoretical model based on neglecting possible near-field effects in radiative heat transfer between closely spaced aluminum foils was used in theoretical predictions of heat transfer through the MLI. Findings: A comparison of the computational results and the experimental data confirms that there are no significant near-field effects between the neighboring MLI layers. It means that there is no considerable contradiction between the far-field model of radiative transfer in MLI and the experimental estimates. Originality/value: An identification procedure for mathematical model of the multilayer thermal insulation showed that a modified theoretical model developed recently can be used to estimate thermal properties of the insulation at conditions of space vacuum.
1 July 2021 in Journal of Engineering Physics and Thermophysics
Purpose: The presented paper aims to consider algorithm for optimal design of multilayer thermal insulation.Design/methodology/approach: Developed algorithm is based on a sequential quadratic programming method.Findings: 2D mathematical model of heat transfer in thermal protection was considered in frame of thermal design of spacecraft. The sensitivity functions were used to estimate the Jacobean of the object functions.Research limitations/implications: Design of distributed parameter systems and shape optimization may be thought of as geometrical inverse problems, in which the positions of free boundaries are determined along with the spatial variables. In such problems, the missing data (i.e. the position of boundaries) are compensated for by the presence of the so-called inverse problem additional conditions. In the case under consideration, such conditions are constrains on the temperature values at the discrete points of the system.Practical implications: Results are presented how to apply the algorithm suggested for solving a practical problem – thickness sampling for a thermal protection system of advanced solar probe.Originality/value: The procedure proposed in the paper to solve a design problem is based on the method of quadratic approximation of the initial problem statement as a Lagrange formulation. This has allowed to construct a rather universal algorithm applicable without modification for solving a wide range of thermal design problems.
1 July 2022 in Journal of Engineering Physics and Thermophysics
This paper considers the features of solving the problem identifying characteristics of a gaseous medium via measurements of the heat flux absorbed by the surface of a blunt body in a supersonic flow. Three groups of parameters are distinguished identification of which is feasible from known values of surface temperature and heat flux: thermodynamic properties of the gaseous medium, its transport properties and conditions on the outer boundary of the boundary layer. In this paper, the transport properties of the gaseous medium are considered as an object of identification. The study is carried out within the framework of the perfect gas model. The identification problem is formulated in the extremum setting. For optimization, the Nelder–Mead method is used in combination with random restarts. It is shown that owing to the specificity of the structure of a set of points the objective function value in which is lower than the value specified by the accuracy of the heat flux measurements, it is possible to obtain a fairly accurate estimate of the identified parameters.