In recent years, step-up/step-down DC–DC converters have been required in renewable energy processing and energy storage applications. In the latter, lithium-ion batteries have played an important role since they have been the most usable source in portable equipment and electric vehicles. This paper proposes a novel step-up/step-down converter with continuous input current and a model-based control scheme. Moreover, the converter design highlights based on steady-state analysis are obtained for a proper parameter selection of the converter. Thus, a fourth-order average system model is obtained to design a multiloop control law. The proposed control is designed in such a way that the control scheme results in an inner current loop on the input current and an outer control loop on the output voltage. Finally, experimental results are performed to assess the performance of the proposed power converter and the control law. An experimental setup with an efficiency of 95 % is implemented to validate the theoretical analysis. The intended application is to regulate a voltage fluctuation from 200 V to 250 V to a constant voltage of 200 V with a nominal power of 533 W.
This paper presents an enhanced operation strategy for a recently proposed converter called Modified Non-Inverting Step-Down/Up (MNI-SDU) DC-DC converter intended for battery voltage regulation. Unlike the conventional approach, where both switching stages share a single duty cycle, the proposed method controls asynchronously the two duty cycles through a fixed time offset to optimize performance. A methodology is developed to define suitable duty cycle ranges that ensure proper converter operation according to input/output voltage specifications, while simultaneously reducing the current and voltage ripples and electrical stress in the capacitor and semiconductors. Furthermore, a model-based control strategy is proposed, taking into account the enhanced operational characteristics. Consequently, a PI-PI current-mode controller is designed using loop shaping techniques to maintain the output voltage regulated at the desired level. The proposed approach is analyzed mathematically and validated through experimental results. The findings demonstrate that optimizing through asynchronous duty-cycle control with a fixed time offset improves ripple, stress values, and overall efficiency, while maintaining robust output voltage regulation, making this method well-suited for applications requiring compact and reliable power conversion.
DC–DC converters have become a key component in the structure of renewable energy systems, where an interface to increase and regulate the output voltage is required. This paper presents a modular non-isolated topology that achieves high voltage gain through interconnected switched-inductor cells. For the proposed converter, the design rules for sizing the energy storage elements for n number of cells are obtained, considering continuous, discontinuous, and boundary operation modes. Therefore, design equations are provided to support the precise selection of passive components according to voltage and power specifications. A nonlinear dynamic model is developed, and a model-based control scheme with inner current and outer voltage loops ensures robust regulation and fast transient response. Experimental validation on a 200 W prototype confirms theoretical predictions under steady-state and real-life dynamic conditions.
This paper presents an improved switching strategy developed for the Modified Non-Inverting Step-Down/Up (MNI-SDU) DC–DC converter. Unlike previously studied switching strategies, the proposed approach changes the firing sequence and then the equivalent circuits without increasing the switching frequency. This switching technique alters the equations used to select the converter’s capacitors, enabling a different voltage ripple in the capacitors while maintaining the same capacitance as in the previous operation. The proposed switching technique is introduced with a theoretical explanation, and the feasibility of the proposed method is verified through experimental results on a 570 W prototype. The results indicate that the new operation reduces capacitor capacitance and achieves over 58% voltage ripple reduction for both capacitors, while preserving desired operation, specified capacitances, and voltage regulation. The proposed strategy provides a compact and effective solution for high-performance power converters in battery-regulated and renewable-energy systems.
This paper presents a nonlinear control scheme for regulating the output voltage of a high-gain active switched-inductor boost converter. The proposed converter topology extends the conventional boost converter by incorporating an additional inductor and a power semiconductor device, thereby enhancing the voltage conversion ratio. The control objectives are twofold: precise regulation of the output voltage and stabilization of the inductor current. To achieve these goals, an interconnection and damping assignment passivity-based control strategy is developed. A dynamic extension is further introduced to compensate for steady-state errors caused by unmodeled parasitic resistances in the system components. In addition, a reference current generator with proportional–integral action is implemented to provide an appropriate current reference. The effectiveness of the proposed controller is validated both numerically and experimentally under three operating scenarios: load step changes, input voltage variations, and output voltage reference transitions.
This paper presents a model-based control strategy for a power factor correction system that employs a high conversion-ratio DC–DC converter. The proposed system consists of two stages. In the first stage, a full-bridge diode rectifier is connected to the grid through a passive filter to improve the quality of the injected current. Two passive AC input filters, namely L and configurations, are evaluated to analyze their impact on grid current quality and overall system performance. The second stage is a high-step-up DC–DC converter based on the switched-inductor technique, which provides a high voltage conversion ratio. A model-based approach is employed to derive the control design from the averaged system model. The resulting control structure consists of a current tracking loop and a voltage regulation loop. A proportional-resonant controller is used to ensure current tracking and achieve a near-unity power factor, while a proportional-integral controller regulates the output voltage. Experimental validation is carried out using a low-power laboratory-scale prototype to assess the effectiveness of the proposed approach. The results demonstrate adequate current tracking and satisfactory dynamic performance within the tested operating conditions.