The Toroidal Field (TF) system of JT-60SA tokamak comprises 18 NbTi superconducting coils. In each TF coil (TFC), 6 Cable-In-Conduit Conductor (CICC) lengths are wound into 6 double-pancakes (DP) and carry a nominal current of 25.7 kA at a temperature of 4.7 K. Each coil is tested in the Cold Test Facility (CTF, CEA Saclay), up to quench. A SuperMagnet (CryoSoft) model has been developed, each of the 12 pancakes being modelled with THEA and cryogenic circuit being modelled with FLOWER. The experiments showed that helium inlet temperature increases until quench triggering at about 7.5 K on C11 and C13, with quench starting on a lateral and on a central pancake respectively. Each test has been simulated, applying (or not) a realistic heat load from casing to winding pack which was estimated from experimental measurements. A parametric analysis has been performed, considering realistic or null heat flux deposition, variation of friction factor (in fabrication quality range) and CICC critical current density (in strand Jc performance range). This last parameter was found to have the largest impact on the localization of the first quenched pancake (central or lateral).
30 January 2018 in IEEE Transactions on Applied Superconductivity
The Toroidal Field system of the JT-60SA tokamak is composed of 18 NbTi superconducting coils. Each TF coil is composed of 6 cable-in-conduit conductor lengths, wound in double-pancakes (DP). These coils are being tested in the single coil configuration at the so-called Cold Test Facility (CEA/IRFU Saclay, France). The test program includes for all coils a quench test at nominal current obtained by a progressive increase of the operating temperature at helium inlet up to quench. Thanks to the accuracy of the voltage measurements it has been possible to follow the early development of the quench at the scale of a few millimeters normal length. The paper presents the evolution of the resistive voltages measured on eight coils before the safety discharge is triggered. This early quench development over one conductor length was also simulated using the THEA code with relevant boundary conditions. Two different quenchs (two different coils) were analyzed: one starting on a central pancake (peak magnetic field), the other on a side pancake (warmer conductor due to heat transfer from the casing). The simulations show good agreement with experiments, stressing particularly three phases in the quench development clearly identified in the measured resistive voltages of all coils.
30 January 2018 in IEEE Transactions on Applied Superconductivity
In the framework of the European-Japanese project JT-60SA, quench tests are performed for each of the 18 NbTi superconducting Tokamak Toroidal Field Coils (TFCs) in the Cold Test Facility (CTF) at CEA Saclay. While launching these experimental quench tests, the conductor current sharing temperature ($T_{cs}$) is reached by progressively increasing the inlet helium temperature. Quite complex quench dynamics are then observed due to several coupled physical phenomena influencing the quench propagation. In order to better understand the experimental analyses on coils quench behavior, a numerical model has been used, combining the computation code THEA (Thermal Hydraulic and Electric Analysis of superconducting cables) for the longitudinal quench transient modelling along the CICC (Cable-In-Conduit Conductor), and an additional inter-turn thermal coupling model for transverse heat flux modelling. In this paper, several parametric studies will be done thanks to simplified numerical simulations in order to identify the predominant physical phenomena driving the JT-60SA TFCs quench propagation. The analysis focuses on the linear power impact on quench initiation, the quench propagation dynamics, and the reverse flow effect.
26 December 2023 in IEEE Transactions on Applied Superconductivity
Shanghai HIgh repetitioN rate XFEL and Extreme light facility (SHINE) is a 3 km long advanced X-ray source facility. The main superconducting Linear Accelerator (Linac) of SHINE can increase the electron beam energy up to 8 GeV under superconducting (SC) continuous wave (CW) mode. SHINE Linac is mainly based on the seventy-five 1.3 GHz-cavity cryomodules which are connected in series in 1.4 km and operated at superfluid helium temperature of 2 K. Each cryomodule mainly consists of 8 Superconducting Radio Frequency (SRF) cavities, 8 high power couplers, 8 tuners, one cold Beam Position Monitor (BPM) and one superconducting quadrupole (SCQ) magnet. In order to ensure the cryomodules stable operation at 2 K in the Linac tunnel, all the key elements are required to be tested at cryogenic temperatures before their assembly into the cryomodule. A Multifunction Test Facility (MTF) is designed and fabricated, by referring to the 3-cryogenic circuit design for the cryomodule (2 K, 5 K and 45 K) as well as the compatible consideration for all other cryomodules key elements cryogenic tests. SCQ magnet, as designed to work at liquid helium temperature by conduction-cooling, is thus necessary to be carried out on the performance tests in the MTF. This paper will give a detailed description of the MTF, as well as the cryogenic commissioning and test results for the facility itself. The experimental issues related to cryogenic tests of the SCQ magnets, such as the conduction-cooling performance and the cryogenic stability for current tests, are also discussed.
Buffered chemical polishing (BCP) is an important and widely used polishing technique for superconducting radio-frequency (SRF) cavities made of niobium. A common problem encountered during BCP is the formation of bubbles and W-shaped pits on the cavity surface, which may severely limit the RF performance. We report a method to address the problem of W-shaped pits through optimizing the BCP acid ratio. We systematically investigate the effect of the BCP acid ratio through sample and cavity BCP experiments and determine an optimal ratio for the three acids. The new BCP recipe with the optimal acid ratio is verified through the development of niobium cavities with several different shapes, which are shown to be free of pits and demonstrate excellent RF performance; notably, several 3.9 GHz nine-cell cavities present unprecedented accelerating gradients. Furthermore, the findings suggest a simple pit-free BCP recipe that does not require , using only HF and . The method proposed in this study is also appropriate for suppressing pit formation with other acid mixtures or when polishing other metal objects.
22 April 2026 in Physical Review Accelerators and Beams
The Shanghai high repetition rate XFEL and extreme light facility linear accelerator employs two 3.9 GHz third harmonic cryomodules. The 3.9 GHz fundamental power coupler is one of the key components of the cryomodule and is designed to handle 2 kW of continuous-wave rf power, meeting operational requirements with a beam current of 0.3 mA and cavity gradient of 1 3.1 MV / m . A key innovation of the 3.9 GHz coupler is the incorporation of an adjustable antenna insertion depth, which enables online external quality factor ( Q ext ) tuning and eliminates the need for a three-stub tuner, reducing system complexity and cost. Two 3.9 GHz coupler prototypes were fabricated and underwent comprehensive rf testing. The couplers achieved excellent performance with an insertion loss of − 0.1 6 dB and return loss of − 4 3.2 2 dB at 3.9 GHz after structural optimization. High-power rf conditioning demonstrated stable operation at 2 kW in traveling wave mode and 1 kW in standing wave mode. Sixteen production 3.9 GHz couplers were manufactured and integrated into two third harmonic cryomodules, which achieved maximum total cavity voltages of 63.6 and 59.8 MV, respectively, with average usable accelerating gradients of 2 3.0 and 2 1.6 MV / m . The cryomodules have been installed in the tunnel and initial beam commissioning has been completed successfully.