Some transit companies have reduced up to 25% of their fuel consumption by training their drivers on eco-driving. We propose to further reduce fuel consumption by using best driving practices, which consist of guiding drivers on the recommended ranges of vehicle speed and engine RPM that lead to minimum fuel consumptions. These recommendations are obtained by monitoring the engine operational parameters used by drivers who have shown the lowest fuel consumption while driving vehicles of similar technology and running on the same section of the road. To demonstrate the applicability of this alternative, we monitored a fleet of 15 transit buses of recent technology serving a ∼72-km long route of general characteristics during eight months of normal operation. For each kilometer, trips with the lowest fuel consumption were selected, and their interquartile ranges of RPM and speed were obtained. Then, a well-trained driver in eco-driving traveled over the same road with same type of buses, using these recommended ranges. Using his eco-driving training, he obtained a 0.5% reduction in fuel consumption with respect to the average of the population, and by using the best driving practices, his savings increased up to 10.1%. These savings were linked to an increase in the average energy efficiency of the engine from 27.6% to 28.9%, which demonstrates that when drivers use these best driving practices, they tend to operate the engine under conditions closer to the load—RPM engine area of engine highest efficiency.
Electric vehicles are shifting the paradigm of electrical distribution networks operation. Thus, the operation of electrical distribution networks is becoming more complex and challenging for ensuring quality, security and reliability. In this paper, the plug-in electric vehicles charging coordination on electrical distribution networks is to carried out. The plug-in electric vehicles batteries equations are modeled and embedded into a charging coordination mixed-integer second-order cone programming model. The proposed mathematical model is formulated to minimize the total operational costs of the electrical distribution networks by determining an optimal charging coordination for the plug-in electric vehicles batteries. Results of a case study based on the 136-node test system show the effectiveness of the proposed approach.
Regarding the decision to opt for vehicles with electric propulsion systems to achieve a sustainable future, much research has focused on the electrification of passenger cars, since this class of vehicles is the largest contributor of greenhouse gas emissions in the transportation sector. The purpose of this paper is to assess the energy performance of an electric vehicle used as a taxi in Loja, Ecuador, an intermediate Andean city, using a model-driven approach. Data acquisition was performed through the OBDII port of the KIA SOUL EV for 24 days and the variable mass of the vehicle was recorded as a function of the number of passengers; the effects of road gradient were also considered. The energy performance of the vehicle was simulated by developing an analytical model in MATLAB/Simulink. An average measured battery performance of 8.49 ± 1.4 km/kWh per day was obtained, where the actual energy regenerated was 31.2 ± 1.5%. To validate the proposed model, the results of the daily energy performance estimated with the simulation were compared with those measured in real driving conditions. The results demonstrated a Pearson correlation coefficient of 0.93, indicating a strong positive linear dependence between the variables. In addition, a coefficient of determination of 0.86 and a mean absolute percentage error of 3.35% were obtained, suggesting that the model has a satisfactory predictive capacity for energy performance.
Welcome to the WIT Press eLibrary - the home of the Transactions of the Wessex Institute collection, providing on-line access to papers presented at the Institute's prestigious international conferences and from its State-of-the-Art in Science & Engineering publications.