Since data stream anomaly detection algorithms based on sliding windows are sensitive to the abnormal deviation of individual interference data, this paper presents a sliding nest window chart anomaly detection based on the data stream (SNWCAD-DS) by employing the concept of the sliding window and control chart. By nesting a small sliding window in a large sliding window and analyzing the deviation distance between the small window and the large sliding window, the algorithm increases the out-of-bounds detection ratio and classifies the conceptual drift data stream online. The designed algorithm is simulated on the industrial data stream of drilling engineering. The proposed algorithm SNWCAD is compared with Automatic Outlier Detection for Data Streams (A-ODDS) and Distance-Based Outline Detection for Data Stream (DBOD-DS). The experimental results show that the new algorithm can obtain higher detection accuracy than the compared algorithms. Furthermore, it can shield the influence of individual interference data and satisfy actual engineering needs.
With regards to the electromagnetic measurement while drilling (EM-MWD), the extremely-low frequency electromagnetic wave signal (ELF-EM) below 20 Hz is usually used as the carrier of downhole measurement data due to the transmission characteristics of the electromagnetic wave (EM). However, influenced by the low frequency noise of drilling, the ELF-EM signal will be inevitably interfered by field noise, which ultimately impedes decoding. The Fourier band-pass filter can effectively remove out-of-band noise but is incapable of handling in-band noise. Therefore, based on the traditional method, a hybrid algorithm of adaptive Wiener algorithm and correlation detection (AWCD) is designed, so as to enhance the in-band noise processing capability, and the effectiveness of such algorithm is well verified through coding and decoding simulation as well as experimental data. The proposed algorithm, as indicated by theoretical analysis and test data, can effectively solve actual engineering issues, providing methodological references to engineers and technicians.