This study proposes a novel fault diagnosis method that is based on empirical wavelet transform (EWT) and kernel density estimation classifier (KDEC), which can well diagnose fault type of the rolling element bearings. With the proposed fault diagnosis method, the vibration signal of rolling element bearing was firstly decomposed into a series of F modes by EWT, and the root mean square, kurtosis, and skewness of the F modes were computed and combined into the feature vector. According to the characteristics of kernel density estimation, a classifier based on kernel density estimation and mutual information was proposed. Then, the feature vectors were input into the KDEC for training and testing. The experimental results indicated that the proposed method can effectively identify three different operative conditions of rolling element bearings, and the accuracy rates was higher than support vector machine (SVM) classifier and back-propagation (BP) neural network classifier.
Since data stream anomaly detection algorithms based on sliding windows are sensitive to the abnormal deviation of individual interference data, this paper presents a sliding nest window chart anomaly detection based on the data stream (SNWCAD-DS) by employing the concept of the sliding window and control chart. By nesting a small sliding window in a large sliding window and analyzing the deviation distance between the small window and the large sliding window, the algorithm increases the out-of-bounds detection ratio and classifies the conceptual drift data stream online. The designed algorithm is simulated on the industrial data stream of drilling engineering. The proposed algorithm SNWCAD is compared with Automatic Outlier Detection for Data Streams (A-ODDS) and Distance-Based Outline Detection for Data Stream (DBOD-DS). The experimental results show that the new algorithm can obtain higher detection accuracy than the compared algorithms. Furthermore, it can shield the influence of individual interference data and satisfy actual engineering needs.
The effect of the application of machine learning on data streams is influenced by concept drift, drift deviation, and noise interference. This paper proposes a data stream anomaly detection algorithm combined with control chart and sliding window methods. This algorithm is named DCUSUM-DS (Double CUSUM Based on Data Stream), because it uses a dual mean value cumulative sum. The DCUSUM-DS algorithm based on nested sliding windows is proposed to satisfy the concept drift problem; it calculates the average value of the data within the window twice, extracts new features, and then calculates accumulated and controlled graphs to avoid misleading by interference points. The new algorithm is simulated using drilling engineering industrial data. Compared with automatic outlier detection for data streams (A-ODDS) and with sliding nest window chart anomaly detection based on data streams (SNWCAD-DS), the DCUSUM-DS can account for concept drift and shield a small amount of interference deviating from the overall data. Although the algorithm complexity increased from 0.1 second to 0.19 second, the classification accuracy receiver operating characteristic (ROC) increased from 0.89 to 0.95. This meets the needs of the oil drilling industry data stream with a sampling frequency of 1 Hz, and it improves the classification accuracy.
According to the dynamic characteristics of the rolling bearing vibration signal and the distribution characteristics of its noise, a fault identification method based on the adaptive filtering empirical wavelet transform (AFEWT) and kernel density estimation mutual information (KDEMI) classifier is proposed. First, we use AFEWT to extract the feature of the rolling bearing vibration signal. The hypothesis test of the Gaussian distribution is carried out for the sub-modes that are obtained by the twice decomposition of EWT, and Gaussian noise is filtered out according to the test results. In this way, we can overcome the noise interference and avoid the mode selection problem when we extract the feature of the signal. Then we combine the advantages of kernel density estimation (KDE) and mutual information (MI) and put forward a KDEMI classifier. The mutual information of the probability density combining the unknown signal feature vector and the probability density of the known type signal is calculated. The type of the unknown signal is determined via the value of the mutual information, so as to achieve the purpose of fault identification of the rolling bearing. In order to verify the effectiveness of AFEWT in feature extraction, we extract signal features using three methods, AFEWT, EWT, and EMD, and then use the same classifier to identify fault signals. Experimental results show that the fault signal has the highest recognition rate by using AFEWT for feature extraction. At the same time, in order to verify the performance of the AFEWT-KDEMI method, we compare two classical fault signal identification methods, SVM and BP neural network, with the AFEWT-KDEMI method. Through experimental analysis, we found that the AFEWT-KDEMI method is more stable and effective.
Because of the cyclic symmetric structure of rolling bearings, its vibration signals are regular when the rolling bearing is working in a normal state. But when the rolling bearing fails, whether the outer race fault or the inner race fault, the symmetry of the rolling bearing is broken and the fault destroys the rolling bearing’s stable working state. Whenever the bearing passes through the fault point, it will send out vibration signals representing the fault characteristics. These signals are often non-linear, non-stationary, and full of Gaussian noise which are quite different from normal signals. According to this, the sub-modal obtained by empirical wavelet transform (EWT), secondary decomposition is tested by the Gaussian distribution hypothesis test. It is regarded that sub-modal following Gaussian distribution is Gaussian noise which is filtered during signal reconstruction. Then by taking advantage of the ambiguity function superiority in non-stationary signal processing and combining correlation coefficient, an ambiguity correlation classifier is constructed. After training, the classifier can recognize vibration signals of rolling bearings under different working conditions, so that the purpose of identifying rolling bearing faults can be achieved. Finally, the method effect was verified by experiments.