A significant change in the refractive index profiles for the large mode area phosphoroaluminosilicate (PAS) core optical fibers was observed in comparison to that in preforms. This study shows that the refractive index of the PAS core can vary from negative (in preform) to positive (in fiber), and the difference in the refractive index between the core and preform can exceed a few thousand. By measuring a large set of fibers with different concentrations of P2O5 and Al2O3, we define the refractivity of each dopant (P2O5, Al2O3 and AlPO4 joint) after drawing fiber from the preform and discuss the possible origin of the observed refractive index variation.
The minimum refractive index of the aluminophosphosilicate (APS) core in optical fibers has been determined for a wide range of phosphorous and aluminum concentrations. It was found that the APS core refractive index became higher by ~0.0005–0.0012 as compared to that in optical fiber preform. The analysis of the measured data has shown that at least 0.2 mol.% of Al2O3 and P2O5 remain in their ordinary form near their equimolar concentrations and do not form an AlPO4 join (the effect observed for all concentrations of AlPO4 join from 5 to 25 mol.%).