Piles have been extensively used for supporting axial loads and lateral loads for variety of structures including high rise buildings, transmission towers, power stations, offshore structures and highway and railway structures. Many transmission towers, high rise buildings and highway and railway bridges are constructed near steep slopes which are supported by pile foundations. These structures may be subjected to large lateral loads such as strong winds or earthquakes. When piles are constructed in sloping ground, the behaviour of piles under lateral load is different from piles in horizontal ground. The present investigation is to study the behaviour of piles on sloping ground under lateral loads. A series of laboratory model test had been carried out on the instrumented pile on horizontal ground, 1V: 2H slope and 1V: 1.5H slope with the relative density of sand at 30%, 45% and 70% and varying embedment length to diameter ratio of 25, 30, and 35. From the experimental results, the behaviour of t...
1 January 2016 in International Journal of Geotechnical Engineering
In this paper, a finite element numerical analysis was carried out to study the behaviour of group of piles located on sloping ground using finite element analysis software PLAXIS 3D. A pile of 0.305 m diameter and 9.1 m length was arranged in 3 × 3 group pattern with spacing equal to three times the pile diameter (3D) and was modelled by PLAXIS 3D. The group of piles was embedded into a soil profile consisting of soft to medium-stiff clay and silts underlain by sand. A parametric study was carried out to study the behaviour of group of piles located on sloping ground surface (1V:5H and 1V:3H slopes) and subjected to lateral loads. The effect of slopes on pile capacity, the behaviour of lateral deflections and bending moment profile of front, middle and back rows of group of piles were studied.