The penetration of renewable energies in island electricity systems (IESs) poses a series of challenges, which include, among others, grid stability, the response to demand, and the security of the supply. Based on the current characteristics of electricity demand on the islands of the Canary Archipelago (Spain) and their electricity production systems, this study presents a series of alternative scenarios to reduce greenhouse gas (GHG) emissions and increase the penetration of renewable energies. The goal is to optimize combustion-based (nonrenewable) energy production and combine it with renewable-based production that meets the requirements of dynamic response, safety, scaling, and integration with nonrenewable systems in terms of efficiency and power. As verified in the research background, the combination of power producing equipment that is generally employed on the islands is not the best combination to reduce pollution. The aim of this work is to find other possible combinations with better results. A methodology is developed and followed to obtain the lowest GHG production and to determine the measures to be applied based on: (a) changing the fuel type by switching to natural gas in the equipment that allows it; (b) using optimal combinations of the least polluting energy production equipment; (c) integrating, to the extent that it is possible, the Chira-Soria pumped hydroelectric energy storage plant into the Gran Canaria electricity system. A series of alternative scenarios are generated with different operating conditions which show the possibility of increasing the renewable installed capacity in the Canary Islands by up to 36.78% (70% in Gran Canaria), with a 65.13% reduction in GHG emissions and a 71.45% reduction in fuel consumption. The results of this study contribute, through the different measures determined through our research, to the mitigation of GHG emissions.

Gran Canaria, due to its status as an island, has an isolated energy system (IES). This has made it dependent on itself for energy production, which is basically obtained from: (a) Wind and solar energy, which equals 19% of the total energy produced, (b) Energy obtained from the burning of fossil fuels in the energy production equipment of the existing thermal power stations, which equals 81% of the total energy produced. A solution must be found to the current production system, which is already partially obsolete and is due for renewal and/or decommissioning, in order to avoid “Energy Zero”, which means a change in the production cycle. In addition, the incorporation of a pumped hydroelectric energy storage plant “Chira-Soria” into the Gran Canaria electricity system represents another, even more important, change in the dynamics followed up to now. Basically, this plant, which is hydraulically stabilized by means of a seawater desalination plant, incorporates energy storage by storing water at high altitude to be turbined under appropriate conditions. The new situation will be analyzed with this incorporation and the option of an integrated operation in the overall energy system of Gran Canaria will be considered.

Energy sovereignty and carbon footprint mitigation are challenges faced by island electricity systems (IES), along with the promotion of renewable generation systems. One of the aspects that can improve this is the development of specific actions in the recovery of agricultural waste as biofuels. Among them, the banana residue stands out, as it is the majority in agricultural production in the Canary Islands. On the other hand, biofuels are alternatives to fossil fuels that contribute to reducing greenhouse gas emissions. This article studies the potential of waste, the transformation of the existing sugars in the fruit waste of the Canarian banana to transform it into a 100% renewable fuel, bioethanol and, therefore, the environmental impact that it has on banana production, its new carbon footprint.

The Canary Archipelago, in general, and the island of Gran Canaria, in particular, operate with an independent energy system (SIE), which depends largely on local power generation. Today, its energy supply comes mainly from two sources: (a) Renewable energy, accounting for 19.90%, and (b) Fossil fuel combustion in thermal power plants, contributing the remaining 80.10%. The existing energy infrastructure faces challenges due to aging technology, requiring either modernization or replacement to prevent a potential energy crisis and ensure a sustainable production cycle. A transformative step to improve the system is the completion and commissioning in 2030 of the Chira-Soria pumped hydroelectric energy storage (PHES) plant. This installation will allow water to be transported to high altitudes by pumping, to be deposited until the right time and to be turbined to generate electricity in optimal conditions. To fully understand the impact of this integration, detailed analyses of annual energy production patterns, equipment performance, and real-time demand data (collected at five-minute intervals) will be conducted. These assessments will provide insights into how the Chira-Soria PHES can be seamlessly integrated into Gran Canaria’s energy network. Furthermore, they will help identify both the strengths and limitations of this storage solution, paving the way for a more resilient and efficient energy future for the island.

Super duplex stainless steels are widely used in seawater desalination plants due to their high mechanical strength and excellent corrosion resistance in chloride-rich environments. However, during reverse osmosis processes, the salinity of the reject stream increases progressively, generating concentrated brines with concentrations close to 7 wt.% NaCl, which represent a chloride-rich service environment that may affect passive film stability and promote localized corrosion. This study investigates the effect of novel La Geria-inspired microstructures (LGMs) generated by laser surface texturing on the microstructure, microhardness, and electrochemical behavior of UNS S32750 super duplex stainless steel in 3.5 wt.% and 7.0 wt.% NaCl solutions, simulating seawater and concentrated desalination brine. Electrochemical results show that textured surfaces exhibit improved corrosion resistance, with more stable corrosion potentials, lower corrosion current densities, and higher impedance values. Microhardness measurements revealed a homogeneous mechanical response, confirming that laser texturing does not alter the mechanical integrity of the material. Microstructural observations showed reduced surface degradation and improved preservation of the duplex ferrite–austenite structure in textured samples after exposure to chloride solutions. These findings demonstrate that biomimetic laser surface texturing enhances corrosion resistance by modifying interfacial conditions and stabilizing the passive film, providing experimental evidence of the beneficial effect of LGMs in aggressive desalination environments.