A hybrid optical amplifier is proposed using a combination of Er-Yb codoped waveguide amplifier (EYDWA) and fiber optical parametric amplifier (FOPA). The scheme is investigated for 100 × 40 Gb / s dense wavelength division multiplexed (DWDM) system at 0.2-nm channel spacing. The parameters are optimized to achieve a flat gain of >30.6 dB, with a gain ripple of 2.67 dB. This is obtained over a wavelength range of 1542 to 1562 nm at −10-dBm optimum input power per channel, without using any costly gain flattening scheme. For higher input powers up to 10 dBm, an increase in gain ripple from 2.67 to 6.13 dB is observed. The gain ripple of 2.67 dB of the proposed EYDWA–dual pump FOPA configuration is also much better than 10.32 dB for the hybrid EYDWA–single pump FOPA. The obtained high and flat gain, along with the low noise figure, confirms the usefulness of the proposed amplifier for applications in long-haul DWDM systems.

Free space optical (FSO) systems offer an attractive and cost-effective solution for providing communication services in remote regions, as they allow secure transmission without the need for licensing and with lower deployment costs. However, the performance of FSO systems can be significantly impacted by atmospheric turbulences, creating considerable challenges to their deployment. To meet the expanding bandwidth requirements in optical networks, dense wavelength division multiplexing (DWDM) has emerged as a viable option. The development of a 400-Gbps DWDM-FSO system with advanced modulation formats is the subject of this paper. To ensure efficient energy conservation in such a system, power consumption needs to be minimized while maintaining performance level; this calls for optimization of different components within the system. The system is made up of 10 channels and each channel can transmit data at 40 Gbps. Various modulation schemes like carrier-suppressed return-to-zero, modified duo binary return-to-zero, differential phase shift keying, and duo binary return-to-zero are studied for their impact on system performance parameters Q-factor and bit error rate (BER) in C-band around 1550 nm wavelengths. The assessment is also extended to the effects that changing FSO length, input power, and data rate have on these two parameters as well as an evaluation regarding how differing atmospheric conditions influence the FSO system’s effectiveness.