Zakhar Ivanov

Mr. Zakhar Ivanov

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2024 in Advances in Geo-Energy Research
Verified
Journal Article
Open access
PDF file
EKEvgenii Kozhevnikov
Evgenii Kozhevnikov
MTMIKHAIL TURBAKOV
MIKHAIL TURBAKOV
EREvgenii Riabokon
Evgenii Riabokon
EGEvgenii Gladkikh
Evgenii Gladkikh
MGMikhail Guzev
Mikhail Guzev
ZIZakhar Ivanov
Zakhar Ivanov
The study of the influence of cyclic loading on the permeability of rocks has been conducted for a long time. Despite the extensive research database, the actual reasons for the decrease in permeability during loading have not been fully revealed. One of these reasons, as described in the research, is the migration of colloids. This paper presents the findings of a study on colloid migration as one of the causes of permeability degradation in porous rocks under cyclic loading. Permeability is measured by injecting nitrogen at a constant pressure. The cyclic loading program is designed to eliminate the effects of residual deformations, creep, and gas slippage. Direct and reverse nitrogen blowings with increased injection pressure were performed between loading cycles. These blowings promote colloidal movement within the porous medium, leading to the blocking of pore throats and changes in permeability. A notable aspect of this work is that cyclic testing was performed both before and after the saturation and drying procedure. Stuck colloids that could not be moved by blowing are mobilized during saturation and drying. Comparative tests of cores after saturation and drying confirm the effect of colloid migration on permeability and enable the examination of whether plastic deformations caused permeability degradation in previous loading cycles. Additionally, it was observed that when saturated, new colloids can detach due to the Rehbinder effect, significantly reducing permeability. Document Type: Original article Cited as: Kozhevnikov, E., Turbakov, M., Riabokon, E., Gladkikh, E., Guzev, M., Panteleeva, A., Ivanov, Z. Rock permeability evolution during cyclic loading and colloid migration after saturation and drying. Advances in Geo-Energy Research, 2024, 11(3): 208-219. https://doi.org/10.46690/ager.2024.03.05

Verified
Journal Article
Open access
PDF file
EKEvgenii Vasilevich Kozhevnikov
Evgenii Vasilevich Kozhevnikov
MTMIKHAIL TURBAKOV
MIKHAIL TURBAKOV
EREvgenii Riabokon
Evgenii Riabokon
ZIZakhar Ivanov
Zakhar Ivanov
AGAndrei Mikhailovich Golosov
Andrei Mikhailovich Golosov
YSYan Savitsky
Yan Savitsky
Rapid prototyping has a wide range of applications across various fields, both in industry and for private use. It enables the production of individual parts in a short time, independent of supply chains, which is particularly important in remote locations. Among all 3D printing technologies, stereolithography using photo resins is the most accessible and offers the highest printing quality. However, the strength properties of parts made from photo resins remain a critical concern. In this study, we conducted experimental research to investigate the effect of load vector orientation under uniaxial compression on the elastic and mechanical properties of 3D-printed cylindrical samples. The results revealed that samples with layers oriented at 60° to the load vector exhibited the highest strength, while those with layers at 30° to the load vector showed the lowest strength. Samples with layers aligned parallel or perpendicular to the load vector demonstrated similar strength properties. Under quasi-elastic loading, samples with layers parallel to the load vector exhibited the highest Young’s modulus and the lowest Poisson’s ratio. Conversely, samples with layers oriented at 30° to the load vector displayed the highest Poisson’s ratio. Microstructural analysis revealed that the anisotropy in the mechanical properties of the 3D-printed samples is attributed to the layered, heterogeneous structure of the photoresin, which exhibits varying degrees of polymerization along the printing axes. The upper part of each layer, with a lower degree of polymerization, contributes to the ductile behavior of the samples under shear stresses. In contrast, the lower part of the layer, with a higher degree of polymerization, leads to brittle behavior in the samples.

24 February 2026
Verified
Book Chapter
Closed access
PDF file
ZIZakhar Ivanov
Zakhar Ivanov
APArina Panteleeva
Arina Panteleeva
AGAndrey Golosov
Andrey Golosov
KNKirill Novak
Kirill Novak