High-crystalline-quality wide-bandgap metal halide perovskite materials that achieve superior performance in perovskite solar cells (PSCs) have been widely explored. Precursor concentration plays a crucial role in the wide-bandgap perovskite crystallization process. Herein, we investigated the influence of precursor concentration on the morphology, crystallinity, optical property, and defect density of perovskite materials and the photoelectric performance of solar cells. We found that the precursor concentration was the key factor for accurately controlling the nucleation and crystal growth process, which determines the crystallization of perovskite materials. The precursor concentration based on Cs0.05FA0.8MA0.15Pb(I0.84Br0.16)3 perovskite was controlled from 0.8 M to 2.3 M. The perovskite grains grow larger with the increase in concentration, while the grain boundary and bulk defect decrease. After regulation and optimization, the champion PSC with the 2.0 M precursor concentration exhibits a power conversion efficiency (PCE) of 21.13%. The management of precursor concentration provides an effective way for obtaining high-crystalline-quality wide-bandgap perovskite materials and high-performance PSCs.
Perovskite solar cells (PSCs) can utilize the residual photons from indoor light and continuously supplement the energy supply for low-power electron devices, thereby showing the great potential for sustainable energy ecosystems. However, the solution-processed perovskites suffer from serious defect stacking within crystal lattices, compromising the low-light efficiency and operational stability. In this study, we designed a multifunctional organometallic salt named sodium sulfanilate (4-ABS), containing both electron-donating amine and sulfonic acid groups to effectively passivate the positively-charged defects, like under-coordinated Pb ions and iodine vacancies. The strong chemical coordination of 4-ABS with the octahedra framework can further regulate the crystallization kinetics of perovskite, facilitating the enlarged crystal sizes with mitigated grain boundaries within films. The synergistic optimization effects on trap suppression and crystallization modulation upon 4-ABS addition can reduce energy loss and mitigate ionic migration under low-light conditions. As a result, the optimized device demonstrated an improved power conversion efficiency from 22.48% to 24.34% and achieved an impressive efficiency of 41.11% under 1000 lux weak light conditions. This research provides an effective defect modulation strategy for synergistically boosting the device efficiency under standard and weak light irradiations.
Flexible perovskite solar cells (F-PSCs) have the advantages of high power-per-weight, solution processability, and bending durability and have emerged as a competitive photovoltaic technology for various applications. As the core electron transport layer (ETL) in n-i-p-type device configurations, the solution-processed SnO2 generally suffers from serious defect stacking on films, compromising the charge transport properties and the performance of resulting devices. Herein, we proposed a media-filling strategy to optimize the contact quality at the buried interface by introducing Al2O3 nanoparticles on the SnO2 surface. Rather than forming a compact insulating layer, the Al2O3 can fill the grain boundaries of SnO2 and smooth the substrate surface. Optimized interfacial contact under careful concentration control can rationally minimize the contact area of the perovskite with the surface imperfections of SnO2 to mitigate trap-assisted charge recombination. Furthermore, the reduced surface roughness of SnO2 facilitates the uniform deposition and oriented growth of upper perovskite film. As a result, the target F-PSCs achieved an impressive efficiency of 23.83% and retained 80% of the initial performance after 5000 bending cycles at a radius of four mm.
Flexible perovskite solar cells (F-PSCs) hold great potential for lightweight photovoltaic applications due to their flexibility, bending compatibility, and low manufacturing cost. However, tin oxide (SnO2), as a common electron transport layer (ETL) used in F-PSCs, typically suffers from high-density surface defects that hinder the charge extraction efficiency and deteriorate the crystallization quality of the upper perovskite film. Additionally, the poor buried interface quality intensifies lattice extrusion and strain residue across the perovskite films, further aggravating the mechanical brittleness in devices. To address the issues, we developed a molecular bridging strategy by introducing the 2,2′-oxybis(ethylenediamine) dihydrochloride (DO) at the perovskite/SnO2 interface. The diammonium groups of spacer ligands can achieve the bidentate anchoring on the SnO2 and perovskite films, cooperating with the oxygen atom on the alkyl chain to passivate the charged defects at the buried interface. The tailored interface properties also endow the optimized crystallization quality of perovskite films and significantly alleviate tensile strain to strengthen the perovskite’s pliability. As a result, the F-PSCs achieved a champion efficiency of 23.50%, outperforming the value of 21.87% for the control device. Furthermore, the devices exhibited excellent mechanical robustness, maintaining 90% of the initial PCE after 6000 bending cycles at a radius of 4 mm. This work presents a reliable strategy for the synergistic optimization of the buried contact at the electron extraction interface, contributing to the further development of efficient and stable F-PSCs.