A high-sensitivity and low-temperature fiber-optic magnetic field sensor based on a tapered two-mode fiber (TTMF) sandwiched between two single-mode fibers has been proposed and demonstrated. The section of TTMF has a specifically designed transition region as an efficient tool to filter higher-order modes, where the uniform modal interferometer just involved with ${\mathrm{LP}}_{01}$ and ${\mathrm{LP}}_{11}$ modes is achieved. The transmission spectral characteristics and the magnetic response of the proposed sensors have been investigated. The experimental results show that a maximum sensitivity of $98.2\mathrm{pm}/\mathrm{Oe}$ within a linear magnetic field intensity ranging from 0 to 140 Oe can be achieved. Significantly, the temperature cross-sensitivity problem can be resolved owing to the lower thermal expansion coefficient of the TTMF. Finally, with its low insertion loss, compactness, and ease of fabrication, the proposed sensor would find potential applications in the measurement of a magnetic field.

We propose and demonstrate an all-fiber passively mode-locked laser with a figure-8 cavity, which generates pulsed cylindrical vector beam output based on a mode selective coupler (MSC). The MSC made of a two mode fiber and a standard single mode fiber is used as both the intracavity transverse mode converter and mode splitter with a low insertion loss of about 0.65 dB. The slope efficiency of the fiber laser is > 3%. Through adjusting the polarization state in the laser cavity, both radially and azimuthally polarized beams have been obtained with high mode purity which are measured to be > 94%. The laser operates at 1556.3 nm with a spectral bandwidth of 3.2 nm. The mode-locked pulses have duration of 17 ns and a repetition rate of 0.66 MHz.

We demonstrate label-free detection of low glucose concentration based on whispery gallery mode resonance in an optofluidic microcapillary (OFMC) biosensor. The wall surface of the OFMC is bio-chemically functionalized to detect cellular-level glucose concentration as low as 2.78 mM. The measured sensitivity is 0.966 pm/mM. The fabricated microcapillary has a thin wall thickness of 2 μm and a Q factor of 1.3 × 106, corresponding to a bulk refractive index sensitivity of 23.36 nm/RIU. The OFMC biosensor has advantages such as high resistance to environmental perturbation, small sample volume down to 90 nL and cost-effectiveness. Theoretical analysis shows the sensor sensitivity depends on the microcapillary wall thickness and liquid core refractive index.

A sensitivity enhanced temperature sensor with cascaded tapered two-mode fibers (TTMFs) based on the Vernier effect is proposed and experimentally demonstrated. It is confirmed that series connection exhibits higher extinction ratio than parallel one both by theory and experiments, which provides guidance for related experiments. In experiments, two TTMFs have the same single-mode fiber-TTMF-single-mode fiber configuration, while the free spectral ranges (FSRs) are chosen with slightly difference by modifying the parameters in the tapering process. Experimental results show that the proposed temperature sensor possesses sensitivity of −3.348 nm/°C in temperature measurement range from 25 °C to 60°C, 11.3 times sensitivity enhancement in comparison with single TTMF. Benefiting from advantages of high temperature sensitivity, simplicity of manufacture and long distance sensing, this novel sensitivity enhanced temperature sensor can be applied to various particular fields, such as oil wells, coal mines and so on.

Cylindrical vector beams (CVBs) with axial symmetry in both polarization and field intensity have attracted much attention because of their unique optical properties. Conventional methods to obtain CVBs including direct modulation of light beams in free space and high-order mode excitation by offset splicing single-mode fiber with few-mode fiber usually works at single wavelength with rather narrow bandwidth. Here, for the first time to the best of our knowledge, we demonstrate switchable dual-wavelength CVB generation from a passively mode-locked fiber laser using carbon nanotubes as saturable absorber for mode-locking and a home-made mode-selective coupler as both mode converter and birefringence filter. In experiments, the mode-locked fiber laser delivers CVB pulses of dual-wavelength (1532.5 nm and 1555.5 nm) and corresponding single wavelength with duration of hundreds of femtosecond, respectively. Moreover, the output polarization status is switchable between radially and azimuthally polarized states. The mode-locked CVBs with wavelength and polarization flexibility may have potential applications in mode-division multiplexing optical fiber communication, nanoparticle manipulation, material processing, nonlinear optics, and so on.