The extraction of zirconium (Zr) and hafnium (Hf) in methyl isobutyl ketone (MIBK)—thiocyanic acid (HSCN) system has been widely used in the production of nuclear-grade zirconium and hafnium in industry, while the extraction mechanism was not adequately studied. In this study, the extraction and stripping equilibrium of Zr and Hf in the MIBK-HSCN system was studied. The results showed that elevated HCl concentration can increase the distribution ratio of SCN− and decrease that of Zr/Hf in organic phase. In the stripping process, HCl concentration and the Organic/Aqueous (O/A) phase ratio played important roles. The mechanism of the extraction reaction was discussed by considering the stoichiometric relationship of possible reaction equations and corresponding equilibrium constants. The results indicated that SCN− could be extracted into MIBK as HSCN·MIBK. Meanwhile, SCN− could also be extracted into MIBK by complexing with metal (Zr or Hf). The molar ratios of MIBK to the complexes of Zr and Hf have been found to be 5.34 and 5.03, respectively. With the increase in the initial concentration of HCl in the aqueous phase, the complexation molar ratios of SCN− to Zr and Hf increased first and then decreased, and so do the extraction equilibrium constants, which might be due to the extraction competition of HSCN and metal complexes.
Substance separation has always been the foundation of production processes in a variety of industrial sectors such as hydrometallurgy, natural compounds extraction, food industry, pharmaceutical industry, and environmental engineering
A novel strategy for the separation of cadmium from base metals in chloride medium by anion exchange based on the formation of cadmium halo-complexes is presented in this article. Instead of using excess Br− or I− in the feed solution, the anion exchange resin or fibre was first preloaded with Br− or I− for Cd2+ adsorption from Cl− solution. Thus, the consumption of iodide or bromide was minimized while promising high adsorption stability of Cd2+. The adsorption thermodynamics and kinetics of Cd2+ were studied. The adsorption thermodynamics results were processed with Langmuir and Freundlich models and adsorption kinetics results were treated with Pseudo first order model, Pseudo second order model and intraparticle diffusion model. The adsorption mechanism was studied with the aid of FTIR and elemental analysis. Three strategies were applied for the stripping of Cd2+, including the use of water for disequilibrating its halo-complex formation, the formation of positively charged species with ammonia, and the formation of positively charged chelate with multidentate ligand ethylenediamine. On the bases of these results, separation performance was investigated with strongly basic anion exchange resin and fibre, and it was shown that Cd2+ can be efficiently separated from base metals in a wide range of acidity, and that pure Cd2+ solution can be obtained, thus providing a robust, environmentally friendly, and economic technology for its separation.
Our unpreparedness in responding to the prompt emergence of COVID-19 in its early stage of outbreak, especially the lack of rapid and early diagnostic techniques for mass screening which should have been prioritized, contributed to the virus' spread alongside other factors. This article provides an overview of the common diagnostic techniques with special focus on the reported and/or authorized point-of-care methods for early COVID-19 diagnosis, including lateral flow assays and localized surface plasmon resonance-based approaches. The inherent limitations of these techniques are critically examined. We then propose a potentially more competent alternative, i.e. direct detection of viral particles with aptamer-conjugated gold nanoparticles in liquid solution in combination with noninvasive breath sampling or saliva sampling, for further improvement in early diagnostic capability for infectious respiratory diseases like COVID-19. In addition, an integration of air sampling with in-situ direct colorimetric detection of viral particles could represent a potential option for airborne virus detection, thus minimizing the transmission of infectious diseases and their impact on the economy and life in the future.