Mechanisms of the radiolytic formation of99TcIVO2·nH2O colloids were studied by bremsstrahlung irradiation of an aqueous pertechnetate (TcVIIO4-) solution under different conditions; pH of the target solution, concentration of TcO4- and presence or absence of radical scavengers and of seed particles of TcO2. nH2O. Colloid particles (30-130 nm) of TcO2·nH2O - a coagulate of nanoparticles with the size of 2 nm - were radiolytically produced at pH higher than 3, whereas a soluble Tc (IV) species but colloid was formed at lower pH. The soluble Tc (IV) species transformed to the TcO2·nH2O colloid when the pH of the solution was raised to 3 or higher after the irradiation. This fact suggests that the soluble Tc (IV) species is a precursor of the TcO2·nH2O colloid. The presence of TcO2·nH2O seed particles in the target solution of TcO4- did not enlarge of the partcile size, revealing that the solidification would take place rather in the solution than on the surface of nanoparticles. The reduction of TcO4- in acidic solutions proceeded mainly through processes involving a bimolecular reaction of TcO4- with hydrogen radicals, followed by the successive disproportionation reactions of Tc (VI) and Tc (V).
A research on production of biodiesel from lipid of phytoplankton Chaetoceros calcitrans through ultrasonic method has been done. In this research, we carried out a series of phytoplankton cultures to determine the optimum time of growth and biodiesel synthesis process from phytoplankton lipids. Process of biodiesel synthesis consists of two steps, that is, isolation of phytoplankton lipids and biodiesel synthesis from those lipids. Oil isolation process was carried out by ultrasonic extraction method using ethanol 96%, while biodiesel synthesis was carried out by transesterification reaction using methanol and KOH catalyst under sonication. Weight of biodiesel yield per biomass Chaetoceros calcitrans is 35.35%. Characterization of biodiesel was well carried out in terms of physical properties which are density and viscosity and chemical properties which are FFA content, saponification value, and iodine value. These values meet the American Society for Testing and Materials (ASTM D6751) standard levels, except for the viscosity value which was 1.14g·cm3.
7 November 2015 in American Journal of Biomedical and Life Sciences
Thermostable amylase enzyme has a broad commercial value in its use in the processing of starch, sugar production, textile, paper, animal feed, pharmaceuticals and in the manufacture of detergents. This study aims to determine the optimum conditions of amylase production from the termofil bacteria Bacillus sp. RSII-1b isolated from a hot spring Lejja South Sulawesi and characterizing the amylase enzyme. The testing of amylase production was done with various concentration of starch and CaCl 2 in the production medium, then fermented to obtain maximum amylase activity, amylase enzyme was produced in optimum condition, and its characteristic was tested using 2% starch substrates in various pH, temperature and determining the compound cofactor which can act as activators or inhibitors of the amylase activity, the enzyme activity was tested using DNS method. Crude extract enzyme has the highest enzyme activity of the protein content determined by the method of Lawry. The results showed that the amylase enzyme from Bacillus sp RSAII-1b isolates can be manufactured to a maximum at 33 hours of fermentation time with conditions: the concentration of substrate (starch) 1.5%, 0.08% CaCl 2 , 55°C temperature, medium pH 7.0 and aeration speed 200rpm with the activity of 0.1323U/mL, amylase crude extract protein content of 1.86mg/mL, with spesifik activity 0.0711 U/mg protein. Crude extract amylase work optimally at pH 6.0; 55°C -60°C the amylase activity of 0.165U/mL, the specific activity of 0.089U/mg protein. Amylase enzyme is an enzyme that depends on metal because its catalytic activity can be activated by metal ions Ca 2+ , Mg 2+ , Cu 2+ , Ni 2+ and Co 2+ as activators whereas Zn 2+ ions decrease the activity of enzymes as inhibitors. Amylase activity in the crude extract optimum conditions with the addition of 10 mm ions Ca 2+ can increase amylase activity up to 32,89%, while the addition of ions Zn 2+ can inhibit amylase activity up to 25%.
13 March 2018 in Journal of Physics: Conference Series
Surface Modification of Activated Carbon from candlenut shell (Aleurites moluccana) was carried out with HNO3 to adsorb methyl orange dye. The manufacture of modified carbon goes through four stages, namely carbonization at 700 oC, activation with 10% H3PO4, and the last one is modified with 4N HNO3, and then pyrolysis at 300 oC. Modified carbon was characterized by Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM). Various contact times were used to study adsorption kinetics and various concentrations were to study the adsorption isotherm pattern. The optimum time for adsorption of methyl orange dye was 40 minutes and the adsorption kinetic followed pseudo-second-order model. The modified candlenut shell activated carbon adsorption isothermal model follows the Langmuir isothermal model with the adsorption capacity value of 17.668 mg/g.