Composite reinforcements are attracting attention in the reinforced concrete (RC) field for their high corrosion resistance, low thermal conductivity, and low electromagnetic interference behavior. However, compared to metallic reinforcements, composites are less ductile and may lead to brittle failure. Three-point flexural tests provide information on the mechanical behavior of metal- and composite-reinforced concrete beams with distinct crack patterns. The structural conditions and failure mechanisms can be defined based on stress change and crack propagation. This study employs finite element analysis (FEA) to simulate the mechanical responses of composite- and metal-reinforced concrete beans under three-point flexural tests and predict the crack propagation in the beams. Machine learning-based algorithms are trained using FEA data to assess the spatial–temporal conditions of the RC beams. The findings indicate that composite rebars provide better reinforcement than metallic rebars in terms of stress fields (30.27% less stress in composite rebars) and crack propagation (fewer cracks in composite RC beams), with the initiation of shear cracks and maximum von Mises stress in rebars being correlated. The findings highlight the effectiveness of the Random Forest Regression (RFR) algorithm () in assessing RC beam conditions under flexural loads, offering insights for efficient industry applications.
Efficient deployment of distributed fiber optic sensors (DFOS) is critical for capturing complex strain behavior in structural health monitoring, especially in scenarios involving non-uniform deformation such as buckling. This study presents an intelligent design framework that integrates experimental testing, finite element analysis (FEA), and advanced data-driven techniques to improve strain field reconstruction and guide sensor deployment. A buckling test on a steel plate instrumented with DFOS was conducted to generate high-resolution strain data, which was used to validate a corresponding FEA model. Four interpolation methods, including bilinear, cubic, inverse distance weighting, and radial basis function (RBF), were selected as benchmarks across various sensor counts. Results indicate that the RBF method provides the most accurate reconstruction performance, particularly under sparse sensor configurations. Moreover, multiple placement strategies were investigated to enhance sensor layout efficiency, including weighted K -means clustering, high-gradient hotspot selection, and density-based spatial clustering of applications with noise. An integrated strategy combining these methods was developed to achieve balanced spatial coverage while capturing key deformation zones. The findings demonstrate that data-informed deployment strategies can significantly improve monitoring accuracy while reducing sensor redundancy. Finally, several deployment methods for the DFOS were evaluated by six metrics, offering quantitative insights into trade-offs between sensing accuracy and deployment feasibility. While the case study is based on a specific buckling scenario, the proposed methodology is generalizable to other structural conditions. Specifically, for large-scale infrastructure, the framework can be employed to capture strains at critical nodes and to reconstruct full-field strain distributions for digital-twin-based infrastructure monitoring. Overall, this framework provides a flexible and scalable reference for optimizing DFOS installation in high-strain-gradient environments.
This study develops a smart composite liner system and a dedicated digital twin framework integrated with the liner to enable internal protection, continuous deformation monitoring, and predictive assessment of dented pipelines. The composite liner integrates distributed strain sensing, where localized indentation generates strain signatures that are converted into digital twin representations of the dented pipe. Digital twin generation is enabled by two specialized algorithms developed for discrete fiber-path measurements and cylindrical pipeline geometry. First, a machine-learning-enhanced Thin Plate Spline (ML-TPS) approach reconstructs full-field circumferential strain distributions from sparse measurements while retaining sharp strain gradients near the dent. The ML-TPS framework uses feature-engineered strain–depth curves and ensemble learning to predict dent depth and circumferential offset, then applies ML-assisted spline reconstruction to predict strain at irregular circumferential positions. Second, a developed strip-based KLPT iFEM formulation converts the reconstructed strain field into three-dimensional dent geometry. The pipe circumference is partitioned into angular strips aligned with the pipe axis for curvature-based reconstruction, and the strip solutions are merged into a continuous cylindrical surface to recover the full geometry of the dented pipeline. Two practical sensor layouts integrated into the liner, 4-path and 3-path, are evaluated to balance reconstruction fidelity and deployment cost. Displacement-controlled indentation tests with 3D scanning validation demonstrate reliable dent depth reconstruction from 1 mm to 24 mm, corresponding to 12% of pipe outer diameter. The reconstructed geometry supports FEA-based structural capacity assessment, CFD-based flow performance evaluation, and remaining useful life estimation for predictive maintenance.
1 August 2026 in Journal of Pipeline Science and Engineering