Strain-based design (SBD) plays an important role in pipeline design and assessment of pipelines subjected to geo-hazards. Under such hazards, a pipe can be subjected to substantial plastic strains, leading to tensile failure at locations of girth weld flaws. For SBD, the finite element method (FEM) can be a reliable tool to calculate the tensile strain capacity (TSC) for better design in pipelines. This study aims to investigate the ductile fracture properties for specific vintage pipeline steel (API 5L grade of X52) using the extended finite element method (XFEM). Eight full-scale tests were simulated using the commercial finite element analysis software ABAQUS Version 6.17. Maximum principal strain is used to assess the damage initiation using the cohesive zone model (CZM) when the crack evolution is evaluated by fracture energy release. A proper set of damage parameters for the X52 materials was calibrated based on the ability of the model to reproduce the experimental results. These experimental results included the tensile strain, applied load, endplate rotation, and crack mouth opening displacement (CMOD). This study describes a methodology for validation of the XFEM and the proper damage parameters required to model crack initiation and propagation in X52 grades of pipeline.

Mechanical damage in form of dents, cracks, gouges, and scratches are common in pipelines. Sometimes, these damages form in proximity of each other and act as one defect in the pipe wall. The combined defects have been found to be more injurious than individual defects. One of the combined defects in pipeline comprises of a crack in a dent, also known as dent-crack defect. This paper discusses the development of finite element models using extended finite element criterion (XFEM) in Abaqus to predict burst pressure of specimens of API X70 pipeline with restrained and unrestrained concentric dent-crack defects. The models are calibrated and validated using results of full-scale burst tests. The effects of crack length, crack depth, dent depth, and denting pressure on burst pressure are investigated. The results show that restrained dent-crack defects with shallow cracks (depth less than 50% wall thickness) inside dents do not affect pipeline operations at maximum allowable operating pressure if crack lengths are less than 200 mm. Releasing restrained dent-cracks when the pressure is at maximum allowable operating pressure can cause propagation of deep cracks (depth of 50% wall thickness or more) longer than 60 mm. However, only very long cracks (200 mm and higher) propagate to burst the pipe. Cracks of depth less than 20% of wall thickness inside dents formed at zero pressure are not propagated by the maximum allowable operating pressure. Dent-crack defects having dents of depth less than 2% outside diameter of pipe behave as plain cracks if the dents are formed at zero denting pressure but are more injurious than plain cracks if the dents are formed in pressurized pipes.

Pipelines can be exposed to a wide variety of loads, depending on the environments and the area of application. These loads may impose large longitudinal plastic strain on pipelines, which could constitute a significant threat to the structural capacity of the pipeline. Reliable calibration of the strain capacity of pipelines plays an important role in the strain-based design (SBD) method. In this paper, a tensile strain capacity (TSC) predictive model (an equation) for welded X42 vintage pipes has been developed by conducting nonlinear parametric analysis followed by nonlinear regression analysis. First, our previously validated extended finite element method (XFEM) model was used to demonstrate the applicability of the XFEM in simulating full-scale ductile fracture response of pipelines subjected to biaxial loading, using pressurized American Petroleum Institute (API) 5L X42 vintage pipes subjected to four-point bending. Second, a parametric study investigating the effects of pipe and defect geometries as well as loading on the pipe TSC is presented. The nonlinear parameterization using XFEM was conducted in abaqus/standard. The TSC trends obtained for the various parameters considered were examined to derive appropriate individual variable functions for each parameter while taking any significant interactions between the parameters into consideration. Also, a nonlinear regression analysis is employed to develop a nonlinear semi-empirical model for predicting the TSC. The results obtained from the developed TSC predictive model (TSCvin.) was compared with those evaluated using the validated XFEM models. The results showed good agreement. Finally, statistical analysis was conducted to ensure the model is unbiased and predicts conservative TSCs by modifying the model using probabilistic error analysis. The modified model is capable of increasing the confidence level in the predicted TSC hence becoming a practical tool for reliable prediction of TSC of X42 vintage pipes needed for conducting pipeline integrity assessment. This modified predictive model is useful in practical applications because it provides a quantifiable degree of conservatism and reliability to the predicted TSCs.