Yifei Yang

Dr. Yifei Yang

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2025 in Energies
Verified
Journal Article
Open access
PDF file
YYYifei Yang
Yifei Yang
YWYifang Wen
Yifang Wen
Xiaodong SunXiaodong Sun
Xiaodong Sun
RWRenzhong Wang
Renzhong Wang
ZDZiyin Dong
Ziyin Dong
Hybrid tractors, as an efficient and environmentally friendly power system, are gradually becoming an important technical choice in the agricultural field. Compared to conventional powertrain systems, hybrid electric powertrains can achieve a 15–40% reduction in fuel consumption. By optimizing the engine operating range and incorporating electric-only driving modes, these systems further contribute to a 20–35% decline in CO2 emissions, along with a significant mitigation of nitrogen oxides (NOx) and particulate matter (PM) emissions. In this paper, the energy management technology of hybrid tractors is reviewed, with emphasis on the energy scheduling between the internal combustion engine and electric motor, the optimization control algorithm, and its practical performance in agricultural applications. Firstly, the basic configuration and working principle of hybrid tractors are introduced, and the cooperative working mode of the internal combustion engine and electric motor is expounded. Secondly, the research progress of energy management strategies is discussed. Then, the application status and challenges of hybrid power systems in agricultural machinery are discussed, and the development trend of hybrid tractors in the fields of intelligence, low carbonization, and high efficiency in the future is prospected. This paper extracts many experiences and methods from the references over the years and provides a comprehensive evaluation.

30 September 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
YYYifei Yang
Yifei Yang
Xiaodong SunXiaodong Sun
Xiaodong Sun
FCFeng Cai
Feng Cai
This paper introduces an improved model predictive current control (MPCC) with the finite position set model reference adaptive system (FPS-MRAS) observer for speed sensorless control of an interior permanent-magnet synchronous motor (IPMSM). The voltage and current at (k)th moment are used to calculate the back electromotive force (EMF) which will predict the current at (k+1) th moment. Otherwise, the current delay compensation is introduced to further improve the dynamic performance and solve the delay problem. The FPS-MRAS is proposed to replace the traditional proportional-integral (PI) controller, which usually needs lots of work to tune the parameters. The discrete rotor position angles are used to calculate discrete stator fluxes which are applied to form the cost function. An iterative algorithm with the binary circle is introduced to increase the estimation accuracy with finite angles. In the end, the dynamic performance of these methods is compared via experiments under different conditions.

16 January 2025 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
YYYifei Yang
Yifei Yang
Xiaodong SunXiaodong Sun
Xiaodong Sun
Anton DianovAnton Dianov
Anton Dianov
Galina DemidovaGalina Demidova
Galina Demidova
Vladimir PrakhtVladimir Prakht
Vladimir Prakht
SHShouyi Han
Shouyi Han
To rapidly and accurately establish the model of switched reluctance motors (SRMs) and enhance torque control performance, this paper proposes a model predictive torque control (MPTC) strategy based on the optimized voltage vector. First, a fourth-order Fourier series is used to calculate the flux and torque models, and a complete nonlinear model of the SRM is constructed using the Kriging model. Second, the torque characteristics are used to divide the sectors, thereby reducing the number of candidate voltage vectors (CVVs) and effectively decreasing the computational burden of predictive control. Finally, an adaptive adjustment algorithm for the sector boundary angle is proposed, where the position of the sectors is determined based on variations in speed and load. The proposed method reduces torque ripple and enhances dynamic response capability. The effectiveness of this approach is validated through experiments on a 12/10 pole six-phase SRM prototype.

24 February 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
YYYifei Yang
Yifei Yang
Xiaodong SunXiaodong Sun
Xiaodong Sun
NXNaixi Xu
Naixi Xu
BWBingkuan Wan
Bingkuan Wan
MYMing Yao
Ming Yao
This paper presents a novel multi-objective optimization method to enhance the performance of a 12/10 stator/rotor switched reluctance motor (SRM), considering the target driving cycle and driving condition. First, the multi-objective optimization problem with the target driving cycles, defined by US Environmental Protection Agency (EPA), is defined. Second, the operation points of the drive cycle are divided into different driving conditions, and the two-step clustering algorithm is exploited to find the cluster centroids as representative operation points of each driving condition. Finally, the optimization is performed for both the motor level and control level. The motor level optimization is performed based on those representative operation points, and the dimension reduction optimization method (DROM) is utilized to reduce the computational burden. The optimal solution can be chosen from the Pareto front through grey relation analysis (GRA) and the order preference by similarity to the ideal solution (TOPSIS). After motor level optimization, the control level optimization is conducted and the result is discussed. A 12/10 SRM drive system is investigated to verify the effectiveness of the proposed method and the finite element models (FEMs) are verified by the experiment results. From this discussion, it can be found that the optimized motor exhibits high efficiency and low torque ripple for the target driving cycle.

1 November 2025 in AIP Advances
Verified
Journal Article
Open access
RWRenzhong Wang
Renzhong Wang
ZHZhihui Huang
Zhihui Huang
YYYifei Yang
Yifei Yang
YWYifang Wen
Yifang Wen
Xiaodong SunXiaodong Sun
Xiaodong Sun
Permanent magnet synchronous motors (PMSMs) are widely used in electric vehicles and industrial drives due to their high power density and efficiency. However, the performance of traditional predictive control strategies—such as sliding mode control and deadbeat predictive control—is highly dependent on the accuracy of motor parameters, which are prone to vary under real-world operating conditions. These parameter mismatches, along with external disturbances, can lead to current tracking errors, torque ripple, and degraded system robustness. This paper provides a comprehensive review of robust predictive current and speed control methods for PMSMs, focusing on three main approaches: disturbance observation, online parameter identification, and predictive model improvement. Furthermore, emerging trends such as multi-step prediction, enhanced ultra-local models, hybrid observers, and artificial intelligence-based techniques are discussed. This paper concludes with future research directions aimed at achieving higher robustness and intelligence in PMSM drive systems.

11 November 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YYYifei Yang
Yifei Yang
ZSZonghao Su
Zonghao Su
Xiaodong SunXiaodong Sun
Xiaodong Sun
XLXuwei Lin
Xuwei Lin
Severe harmonic current is always a problem of dual three-phase permanent magnet synchronous motors. Due to the low impedance of the x–y subspace, harmonic currents caused by factors such as inverter nonlinearity and disturbances will lead to huge copper losses. To suppress harmonic current, this article presents a deadbeat predictive harmonic current control (DPHCC). First, an online estimate method is proposed to compensate the nonlinearity of inverters by current injection. This method can calculate the amplitude of the nonlinear error of the inverter in real time by the voltage difference before and after the current injection. Second, an extended state observer based DPHCC method is designed to eliminate unmodeled disturbances such as parameter mismatch. Finally, experimental results demonstrate the superiority of the proposed method in harmonic suppression.