An experimental study was conducted to analyze temperature evolution during very high cycle fatigue tests. The temperature–number of cycles (T–N) curve is typically divided into three phases: Phase I—a rapid temperature increases at the start of the test, Phase II—temperature stabilization, and Phase III—a sharp temperature rise at the test’s end, coinciding with specimen fracture. The high frequencies used in ultrasonic fatigue testing can induce self-heating in specimens, but the thermal effects are not yet fully understood. Temperature is known to influence the fatigue performance of materials. To explore this, specimens were subjected to varying stress levels and intermittent loading conditions while monitoring temperature evolution using infrared thermography. The T–N curves were obtained, and S–N curves were constructed for specimens tested at room temperature. All tests were performed under fully reversed loading conditions. The experimental data were used to evaluate models commonly applied in conventional fatigue testing. Additionally, the temperature gradient at the beginning of the ultrasonic fatigue test and the heat dissipation per cycle were estimated and analyzed as potential fatigue damage parameters. These findings indicate that parameters derived from the T–N curve have significant potential for predicting very high cycle fatigue life.
This work aims to produce Polycapractone (PCL) and Chitosan (CTS) matrices in different mass proportions and to analyze the incorporation of Arnica's Tincture and Dr. Humphrey's Curative Wonder under different temperatures. The purpose of this analysis is to make viable the creation of biocompatible matrices capable of absorbing and releasing drugs for future use in the field of Tissue Engineering, more specifically, Bone Tissue Engineering, and in addition, to potentiating the absorption capacity of drugs. The matrices produced were immersed in the cited drugs and placed under conditions of different temperatures. The analyzes were done for Mass Variation and Spectroscopy in the Infrared Region by Fourier Transform (FTIR), and the results showed that, for both drugs, the hot incorporation was better than the room temperature incorporation.
In recent years, tissue engineering has been developing methodologies to potentialize the regeneration of injured tissues, such as using biomaterials to obtain scaffolds performing the controlled release of drugs. The polymers polyhydroxy butyrate (PHB) and chitosan (CHI) have been used in the production of matrices applied to scaffold production. This study aims to produce and evaluate matrices containing different proportions of PHB and CHI using the compression molding technique. These matrices can form scaffolds after drug incorporation of Hamamelis virginiana (HV). In order to predict the swelling of the matrices, the Thin Plate Spline Interpolation method (TPSIM) was used to generate three-dimensional data fitted, showing the influence of time and concentration variables on drug absorption. Results show that the percentage of CHI in the samples determines the swelling degree of the matrices. According to scanning electron microscopy analyses, increasing this polymer's quantity modifies the matrix's morphology, making it more heterogeneous. The sample with 50% by weight composition of CHI showed better-swelling results and samples loaded with HV demonstrated drug release ability. Thus, the obtained matrices have great potential to work as scaffolds and drug delivery systems, and therefore, they are promising products for application in tissue engineering.
12 January 2024 in Brazilian Journal of Experimental Design, Data Analysis and Inferential Statistics
Background: Chitosan nanoparticles are an alternative vehicle for drug formulation and delivery. Objective: This study aims at the synthesis of chitosan/tripolyphosphate nanoparticles through an experimental design 32, to evaluate the ideal conditions for obtaining a reduced particle diameter with potential for encapsulation of biomolecules. Method: The nanoparticles were obtained by ionotropic gelation, in 11 experimental conditions. Statistical Analysis were carried out using the software Statistics 7, having as independent variable: the polymer/crosslinker mass ratio and the drip flow rate of the crosslinker. The hydrodynamic diameter of the nanoparticles was the response variable, which was characterized by dynamic light scattering. Results: For the optimized system the results show that the mass ratio between the reactants influences the particle size obtained, and the mass ratio of Chitosan/TPP between 2.25 - 2.50 is the most indicated for obtaining diameters between 20-50 nm. Conclusion: Considering the range of hydrodynamic diameters observed in this study, the nanoparticles are well-suited for utilization as active carriers, specifically targeting organs to enhance the effectiveness of therapies.