Agro-industrial waste represent an important source of natural polymers for bioplastic obtention, intended for the replacement of materials derived from oil. Polysaccharides, as pectin from orange peel has the potential to be used as raw material for plastic industry, besides an additional value could be obtained from the orange peel that is a waste. In this work, we assessed mechanical and thermal properties of a film obtained from orange peel. Scanning electron microscopy showed a heterogeneous surface with grooves, owed to fibrous materials residues from orange peel. Elastic modulus stayed in the range 7.7–29.9 MPa, according to plasticizer content. By thermogravimetric analysis, we identified up to five events, according to film composition. These results indicate that pectin obtained possess suitable properties to be used as raw material for bioplastic fabrication.
Objective: To evaluate the morphological and thermo-mechanical properties of a biofilm obtained from orange peel. Design/methodology/approach: Pectin, a polysaccharide obtained from orange peel, has the potential to be used as a raw material in the bioplastics industry. The samples obtained were characterized by the Scanning Electron Microscopy (SEM) technique, mechanical tension and by thermogravimetric analysis (TGA). Results: The elastic modulus was in the range of 7.7 to 29.9 MPa, depending on the plasticizer content. The thermogravimetric analysis showed a thermal decomposition between 134.42 to 153.98 °C depending on the plasticizer content and up to five events were identified. Limitations of the study/implications: During the process, a pectin yield of 75% of orange peel was obtained. Findings/conclusions: In developing countries such as Mexico, waste originating from agricultural and agro-industrial activities represents an important source of natural carbohydrate polymers that can be used to produce bioplastics, intended to replace petroleum-derived materials. In the case of orange peel, it can become a potential raw material to obtain value-added products in sectors of the food industry. These results indicated that our pectin has suitable properties to be used as raw material for the manufacture of bioplastics
Segmented polyurethane-ureas (PUU) are thermoplastic polymers used in tissue engineering due to their biocompatibility, biodegradability, and adjustable mechanical properties. PUU synthesis is carried out using the prepolymer method. In this work, an efficient and compact methodology for PUU synthesis was developed, employing PCL-diol, HMDI, and BDA, optimizing time through rapid drying and controlled synthesis conditions. The results revealed flexible, homogeneous, and semicrystalline material. FTIR analysis confirmed the PUU structure, highlighting the characteristic bands of urethane and urea groups. Thermal analysis (TGA) demonstrated high thermal stability, identifying decomposition stages associated with rigid and soft segments. The proposed methodology significantly reduced the synthesis time, producing materials with structural and thermal properties equivalent to those reported in the literature, positioning it as an efficient alternative for PUU production in biomedical applications.