La naranja es uno de los cultivos con mayor plantación en México y se visualiza un crecimiento para los próximos años. Derivado de las actividades de la agroindustria se producen residuos de cáscara de naranja, la cual por su alto contenido de pectina es apropiado para obtener bioplásticos, el cual es el objetivo principal de este trabajo. La extracción de la pectina se realizó mediante hidrólisis ácida, utilizando ácido cítrico al 0,1% y como agente plastificante glicerol a concentraciones de 3%, 4% y 5% para determinar la resistencia y rigidez óptima de la biopelícula. Se obtuvieron biopelículas flexibles, libres de poros y espacios intersticiales en la superficie del material. La biopelícula con composición de glicerol al 5% presentó características uniformes, con mejor flexibilidad y apariencia física en comparación con los de 3% y 4%. Mediante el análisis del FTIR se determinó que el polímero (pectina) mostró una banda característica de absorción del grupo -OH a 3300 cm-1, del grupo C-O a 1023 cm-1 y para el grupo COOH a 1732 cm-1 característica de un material biodegradable. De acuerdo con el análisis elemental de la biopelícula, se encontró que está compuesta por C, H, N y S, lo cual lo hace un material biodegradable no tóxico y amigable con el ambiente.
Agro-industrial waste represent an important source of natural polymers for bioplastic obtention, intended for the replacement of materials derived from oil. Polysaccharides, as pectin from orange peel has the potential to be used as raw material for plastic industry, besides an additional value could be obtained from the orange peel that is a waste. In this work, we assessed mechanical and thermal properties of a film obtained from orange peel. Scanning electron microscopy showed a heterogeneous surface with grooves, owed to fibrous materials residues from orange peel. Elastic modulus stayed in the range 7.7–29.9 MPa, according to plasticizer content. By thermogravimetric analysis, we identified up to five events, according to film composition. These results indicate that pectin obtained possess suitable properties to be used as raw material for bioplastic fabrication.
Sugarcane straw is a waste beneficial to man when used correctly. Its burning is highly destructive if carried out indiscriminately; it causes damage to the soil and emits charcoal particles that pass directly into the environment. Cellulose represents approximately one-third of its composition and is biosynthesized in the process of photosynthesis, producing about 1000 tons per year in the world. In recent years, the electro-pile technique is widely used for the production of polymer fibers with nanometer-to-micrometer diameters. This diameter size allows obtaining materials with large surface area, a desirable feature in the manufacture of membranes with potential application in separation and biomedical processes. The technique is versatile and easy to assemble which has allowed to process a great variety of polymers, integrating in the last years other kinds of materials, nevertheless during the development of the process exist a series of variables that influence in the characteristics of the obtained elements, Either because they are linked to the characteristics of the base material or because their performance is related to other parameters within the process. The objective of this research was to obtain biodegradable polymer membranes from sugar cane being attractive at the biotechnological level.
Objective: To evaluate the morphological and thermo-mechanical properties of a biofilm obtained from orange peel. Design/methodology/approach: Pectin, a polysaccharide obtained from orange peel, has the potential to be used as a raw material in the bioplastics industry. The samples obtained were characterized by the Scanning Electron Microscopy (SEM) technique, mechanical tension and by thermogravimetric analysis (TGA). Results: The elastic modulus was in the range of 7.7 to 29.9 MPa, depending on the plasticizer content. The thermogravimetric analysis showed a thermal decomposition between 134.42 to 153.98 °C depending on the plasticizer content and up to five events were identified. Limitations of the study/implications: During the process, a pectin yield of 75% of orange peel was obtained. Findings/conclusions: In developing countries such as Mexico, waste originating from agricultural and agro-industrial activities represents an important source of natural carbohydrate polymers that can be used to produce bioplastics, intended to replace petroleum-derived materials. In the case of orange peel, it can become a potential raw material to obtain value-added products in sectors of the food industry. These results indicated that our pectin has suitable properties to be used as raw material for the manufacture of bioplastics
Objective: To obtain cellulose from oil palm agroindustrial waste that meets standard physicochemical characteristics to produce value-added products. Design/methodology/approach: Bagasse fibers from the palm agroindustry were used to obtain cellulose, by means of the acid – alkaline hydrolysis methodology. The samples obtained in each stage and the cellulose obtained were characterized by the Fourier Transform Infrared Spectroscopy (FTIR) technique and thermogravimetric analysis (TGA). Results: The final characterized product presented a band corresponding to 1370 cm1 which is a characteristic value of cellulose. The peak at 1731 cm-1 is related to C=O bonds of unconjugated ketones present in hemicellulose. A major thermal event for treated fiber near 355 °C and the high residual mass indicate a good chemical treatment for hemicellulose and lignin elimination. Study limitations/implications: A fiber yield of 39.3% cellulose was obtained during the process from oil palm bagasse. Findings/conclusions: Obtaining cellulose from a highly polluting residue such as palm bagasse and with high production figures in our state, makes it a potential for use to generate biopolymers in combination with natural polysaccharides, providing sustainable benefits and economic impact and promoting sustainable development by replacing conventional fossil plastics, in addition to obtaining value-added products for the same agribusiness and in sectors such as the food industry.
7 January 2025 in Ciencia Latina Revista Científica Multidisciplinar
Introduction: A cardiovascular risk factor (CVRF) is a biological characteristic or lifestyle that increases the probability of suffering or dying from a cardiovascular disease (CVD) in those individuals who present it. Our objective is to determine the cardiovascular risk factors in the university community of the Popular University of Chontalpa. Methods: Descriptive cross-sectional study of a non-probabilistic sample of 166 people. Each participant signed the informed consent and answered a semi-structured survey, which included personal and family pathological history, anthropometric measurements, etc. We also took blood pressure and collected a blood sample for blood chemistry analysis. Results: 59% of the sample was female and 41% male, between 18 and 64 years old. According to the ICC, 32.5% of the population studied has a very high risk, and 21% has a high risk. 62% have a family history. 32.15% were considered to have adequate nutrition; 45.2% consume alcoholic beverages, and 23.8% smoke. 31.91% had hyperglycemia, 38.61% had high triglycerides, and 12.8% had high cholesterol. Only 3.06% exhibited a high risk for HDL-c and 5.10% for LDL-c. Conclusions: The most relevant modifiable CVRFs in the UPCH are age, sex, triglycerides, physical activity, and diet. Develop strategies for reducing these, such as responsible self-care, which translates into a healthy diet and regular physical exercise.