The growing demand for metal production promotes the search for alternative sources and novel modalities in metallurgy. Flotation tailings are an important secondary mineral resource; however, they might pose a potential environmental threat due to containing toxic metals. Therefore, proper leaching reagent selection is required. Ozone is an alternative oxidizing agent for metal leaching, as its use prevents contaminating product generation while increasing the noble metal extraction efficiency in the presence of complexing agents. In this study, the feasibility and efficiency of combining the use of thiosulfate and ozone for gold and silver extraction have been investigated as an eco-friendly alternative for recovery from flotation tailings. Two sets of samples from old flotation tailings of Copper Mine Bor (Serbia) were prepared and physico-chemically characterized, then treated in two experimental leaching procedures, followed by thorough XRD and SEM/EDS analyses of the products. It showed that after 1 h of leaching in a water medium at room temperature and a solid-to-liquid phase ratio of 1:4, 88.8% of Cu was obtained, while a high efficiency of Au extraction from solid residue (after Cu leaching) was attained (83.4%). The results suggest that ozone-assisted leaching mediated by Ca-thiosulfate can be an effective eco-friendly treatment for noble metals recovery from sulfide-oxide ores.
Detailed geological and engineering-geological investigations of the coal zone and the Eastern field of the Gacko coal basin were carried out to provide reliable bases for mining design and operation of the Gacko thermal power plant. The investigations, carried out in accordance with the applicable regulations and project documentation, included 28 drillholes and a wide range of laboratory tests with the aim of defining the qualitative and quantitative parameters of coal and re-categorizing reserves to category A. Special emphasis was placed on the analysis of the stratification of coal seams and the characteristics of accompanying sediments, which is crucial for the selection of the optimal coal purification technology. The results obtained represent the basis for further classification of reserves, mining design and exploitation planning.
Geogrids, with all their specificities in the production itself, their basic division and purpose of use - purpose, is based on the type of material from which they are made and the method of production itself. There are geogrids that are made of synthetic materials, geogrids made of natural materials, and a hybrid type of geogrid, which combines the materials and characteristics of the first two types.A special part of this scientific field that deals with the use of new materials, the possibility of combining them, the type of production and the value of use refers to geogrids and geotextiles made of combined building materials. This type of geogrid would be obtained by crossing bundles of natural materials (organic) and bundles of synthetic fibers (used in geosynthetics).By combining these types (materials) of geogrids and geotextiles in the form of a kind of hybrid technology for the production of these products, we obtain useful parameters suitable for the preservation of the natural environment and the required mechanical and temporal usability.Geogrids made of organic material, otherwise have unique characteristics, consist of biologically and chemically degradable natural fibers. They are designed to hold the soil in place until natural vegetation is established. On the other hand, geogrids and geotextiles made of synthetic materials have much greater strength, elasticity and durability.By combining these types (consumable material) of geogrids (and geotextiles) in the form of a kind of hybrid technology for the production of these products, we obtain useful parameters suitable in the field of environmental protection and the required mechanical and temporal usability.In this paper, we will call such type of geogrids hybrid geogrids.Seemingly contradictory requirements, by applying these "hybrid geomaterials", can be effectively fulfilled.
A previously developed low-cost sample traceability system used QR-code labels, a Google Sheets database, and Google Apps Script automation to record status transitions through mobile shortcuts on Android and iPhone [1]. This paper extends that system with three enhancements for mining and geological field environments: GPS-based geolocation captured at each status update, a real-time dashboard visualizing sample status and location, and an offline-first workflow that queues scans for later synchronization. These extensions address the original system's key limitations, unreliable connectivity in remote areas and a lack of spatial and managerial overview, supporting practical deployment in mining operations.
Considering the geogrids, as one of the types of geosynthetics, the two basic types are distinguished. There are the geogrids made of synthetic materials and the geogrids made of natural materials. This paper deals with the type of geogrids made of natural (organic) materials. Geogrids and geotextiles made of natural material (coconut, jute) are a natural and 100% biodegradable solution for erosion control using the geogrids or geotextile mats made of coconut fibers. A geogrid or permeable geotextile provides a natural support system (improvement of characteristics) to the soil (soil, landfill...) and vegetation.
Geogrids, with all their specificities in the production itself, their basic division and purpose of use - purpose, is based on the type of material from which they are made and the method of production itself. There are geogrids that are made of synthetic materials, geogrids made of natural materials, and a hybrid type of geogrid, which combines the materials and characteristics of the first two types. Organic type geogrids have unique characteristics, they consist of biologically and chemically degradable natural fibers. They are designed to hold the soil in place until natural vegetation is established. Geogrids (geotextiles) made of synthetic materials have much greater strength, elasticity and durability. By combining these types (consumable material) of geogrids (and geotextiles) in the form of a kind of hybrid technology for the production of these products, we obtain useful parameters suitable in the field of environmental protection and the required mechanical and temporal usability. In this paper, we will call such type of geogrids hybrid geogrids. Seemingly contradictory requirements, by applying these "hybrid geomaterials", can be effectively fulfilled.