The latest discussions on upcoming 6G wireless communications are envisioning future networks as a unified communications, sensing, and computing platform. The recently conceived concept of the smart radio environment, enabled by reconfigurable intelligent surfaces (RISs), contributes toward this vision, offering programmable propagation of information-bearing signals. Typical RIS implementations include metasurfaces with almost passive unit elements capable of reflecting their incident waves in controllable ways. However, this solely reflective operation induces significant challenges for RIS optimization from the wireless network orchestrator. For example, RISs lack information to locally tune their reflection pattern, which can be acquired only by other network entities and then shared with the RIS controller. Furthermore, channel estimation, which is essential for coherent RIS-empowered communications, is challenging with the available RIS designs. This article reviews the emerging concept of hybrid reflecting and sensing RISs (HRISs), which enables metasurfaces to reflect the impinging signal in a controllable manner while simultaneously sensing a portion of it. The sensing capability of HRISs facilitates various network management functionalities, including channel parameter estimation and localization, while giving rise to potentially computationally autonomous and self-configuring metasurfaces. We discuss a hardware design for HRISs and detail a full-wave electromagnetic (EM) proof of concept. The distinctive properties of HRISs, in comparison to their solely reflective counterparts, are highlighted, and a simulation study evaluating HRISs’ capability for performing full and parametric channel estimation is presented. Future research challenges and opportunities arising from the HRIS concept are also included.
13 February 2023 in IEEE Transactions on Communications
Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as almost passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including the inherent difficulty in estimating the underlying wireless channels. In this paper, we focus on the recently conceived concept of Hybrid Reconfigurable Intelligent Surfaces (HRISs), which do not solely reflect the impinging waveform in a controllable fashion, but are also capable of sensing and processing an adjustable portion of it. We first present implementation details for this metasurface architecture and propose a convenient mathematical model for characterizing its dual operation. As an indicative application of HRISs in wireless communications, we formulate the individual channel estimation problem for the uplink of a multi-user HRIS-empowered communication system. Considering first a noise-free setting, we theoretically quantify the advantage of HRISs in notably reducing the amount of pilots needed for channel estimation, as compared to the case of purely reflective RISs. We then present closed-form expressions for the Mean-Squared Error (MSE) performance in estimating the individual channels at the HRISs and the base station for the noisy model. Based on these derivations, we propose an automatic differentiation-based first-order optimization approach to efficiently determine the HRIS phase and power splitting configurations for minimizing the weighted sum-MSE performance. Our numerical evaluations demonstrate that HRISs do not only enable the estimation of the individual channels in HRIS-empowered communication systems, but also improve the ability to recover the cascaded channel, as compared to existing methods using passive and reflective RISs.
Reconfigurable reflective surfaces can form prescribed radiation patterns given a known incident signal, a capability with widespread use for beamforming in radar and imaging systems or for altering the propagation environment in wireless communication networks. For reflective surfaces to operate intelligently, they need to acquire the relevant information about the incident and reflection directions autonomously. Toward this goal, we design a metasurface that can generate reconfigurable radiation patterns as well as perform compressive sensing of the incident signals, allowing it to adapt its response without requiring feedback loops or dedicated links to transmitters or receivers—paving the way for autonomous and smart operation. To realize such an operation, we propose a metasurface consisting of two types of elements, conventional and hybrid. While both elements are designed to reflect the signal, the hybrid ones allow coupling of a small portion of the incident signal into a sensing layer. To ensure low loss and complexity, the number of hybrid elements and the associated sensing circuitry need to be kept small, which can degrade sensing performance. To circumvent this issue, we develop a compressive sensing scheme that leverages the inherent multiplexing of information within the metasurface’s substrate to retrieve relevant information using a few sensing RF chains, thus guaranteeing low cost and complexity. As an illustrative example, we numerically demonstrate the possibility to detect angles of arrivals of single and multiple incident beams using full-wave simulations of the proposed structure. We also show that the proposed metasurface can form desired radiation patterns and the introduction of the sensing capabilities has a minimal impact on its main functionality. The proposed smart reconfigurable surface with sensing capabilities may operate autonomously and can benefit wireless communication, wireless power transfer, and imaging systems.
21 June 2023 in IEEE Antennas and Wireless Propagation Letters
Reconfigurable reflective metasurfaces—or reconfigurable intelligent surfaces (RISs)—can redirect incident signals toward desired directions, an ability that allows for sculpting wireless communication channels with desired characteristics. This smart radio environment, however, necessitates the information about the transmitter(s) and the receiver(s) to be available at the RIS. One possible solution to this need is to add sensing capability to the RIS. However, sensing complex wireless signals (i.e. both amplitude and phase) often requires complicated setups. In this paper, we propose and numerically demonstrate a reconfigurable reflective metasurface that uses intensity-only samples of the incident signal to retrieve desired information about the propagation environment. To do that, we will randomly tune the metasurface elements to multiplex information incident on all of them. The phaseless multiplexed data is then processed using computational ghost imaging algorithm to retrieve the desired information. As a demonstrative example, we present the detection of the incident angle from a user in a free-space environment. This simplified sensing process can pave the way for incorporation of RISs with integrated sensing capabilities in future wireless communication or sensing systems.
14 September 2023 in IEEE Antennas and Wireless Propagation Letters
Detecting the angle of arrival (AoA) of electromagnetic waves is an important function in a variety of applications such as navigation and wireless communication. In this paper, we propose a conformal metasurface antenna (CMA) for detecting AoA in the horizontal plane. This structure consists of a conformal waveguide with its upper conductor wall fashioned with metamaterial radiators. The resonance frequencies of the metamaterial radiators are selected randomly over a band of operation. The random distribution of resonance frequencies results in patterns that change with frequency and encode information about the AoA of an incident signal into frequency samples which can be analyzed to retrieve the incident AoA. Using full-wave simulation, we detail the design and operation of the proposed frequency-diverse CMA. We develop and numerically demonstrate a computational processing technique to estimate the AoA from the cross correlation of the signals at the end of coaxial connectors attached to the CMA. The impact of the number of frequency points, bandwidth, and noise on the performance of the device will be illustrated. The proposed device promises a simple and versatile hardware that can detect AoA from a single receiver and can find application in wireless communication, surveillance, and navigation systems.
Acquiring information about the surrounding environment is crucial for reconfigurable intelligent surfaces (RISs) to effectively manipulate radio wave propagation. This operation can be fully automated by incorporating an integrated sensing mechanism, leading to a hybrid configuration known as a hybrid reconfigurable intelligent surface (HRIS). Several HRIS geometries have been studied in previous works, with full-wave simulations used to showcase their sensing capabilities. However, these simulated models often fail to address the practical design challenges associated with HRISs. This paper presents an experimental proof-of-concept for an HRIS, focusing on the design considerations that have been neglected in simulations but are vital for experimental validation. The HRIS prototype comprises two types of elements: a conventional element designed for reconfigurable reflection and a hybrid one for sensing and reconfigurable reflection. The metasurface can carry out the required sensing operations by utilizing signals coupled to several hybrid elements. This paper outlines the design considerations necessary to create a practical HRIS configuration that can be fabricated using standard PCB technology. The sensing capabilities of the HRIS are demonstrated experimentally through angle of arrival (AoA) detection. The proposed HRIS has the potential to facilitate smart, autonomous wireless communication networks, wireless power transfer, and sensing systems.