Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low-power configuration, which has increased potential in enabling massive connectivity and low-latency communications. Accurate and low-overhead channel estimation in RIS-based systems is one of the most critical challenges due to the usually large number of RIS unit elements and their distinctive hardware constraints. In this paper, we focus on the uplink of a RIS-empowered multi-user Multiple Input Single Output (MISO) uplink communication systems and propose a channel estimation framework based on the parallel factor decomposition to unfold the resulting cascaded channel model. We present two iterative estimation algorithms for the channels between the base station and RIS, as well as the channels between RIS and users. One is based on alternating least squares (ALS), while the other uses vector approximate message passing to iteratively reconstruct two unknown channels from the estimated vectors. To theoretically assess the performance of the ALS-based algorithm, we derived its estimation Cramér-Rao Bound (CRB). We also discuss the downlink achievable sum rate computation with estimated channels and different precoding schemes for the base station. Our extensive simulation results show that our algorithms outperform benchmark schemes and that the ALS technique achieves the CRB. It is also demonstrated that the sum rate using the estimated channels always reach that of perfect channels under various settings, thus, verifying the effectiveness and robustness of the proposed estimation algorithms.

Wireless communication in the TeraHertz band (0.1-10 THz) is envisioned as one of the key enabling technologies for the future sixth generation (6G) wireless communication systems scaled up beyond massive multiple input multiple output (Massive-MIMO) technology. However, very high propagation attenuations and molecular absorptions of THz frequencies often limit the signal transmission distance and coverage range. Benefited from the recent breakthrough on the reconfigurable intelligent surfaces (RIS) for realizing smart radio propagation environment, we propose a novel hybrid beamforming scheme for the multi-hop RIS-assisted communication networks to improve the coverage range at THz-band frequencies. Particularly, multiple passive and controllable RISs are deployed to assist the transmissions between the base station (BS) and multiple single-antenna users. We investigate the joint design of digital beamforming matrix at the BS and analog beamforming matrices at the RISs, by leveraging the recent advances in deep reinforcement learning (DRL) to combat the propagation loss. To improve the convergence of the proposed DRL-based algorithm, two algorithms are then designed to initialize the digital beamforming and the analog beamforming matrices utilizing the alternating optimization technique. Simulation results show that our proposed scheme is able to improve 50% more coverage range of THz communications compared with the benchmarks. Furthermore, it is also shown that our proposed DRL-based method is a state-of-the-art method to solve the NP-hard beamforming problem, especially when the signals at RIS-assisted THz communication networks experience multiple hops.

A revolutionary technology relying on Stacked Intelligent Metasurfaces (SIM) is capable of carrying out advanced signal processing directly in the native electromagnetic (EM) wave regime. An SIM is fabricated by a sophisticated amalgam of multiple stacked metasurface layers, which may outperform its single-layer metasurface counterparts, such as reconfigurable intelligent surfaces (RIS) and metasurface lenses. We harness this new SIM for implementing holographic multiple-input multiple-output (HMIMO) communications without requiring excessive radio-frequency (RF) chains, which is a substantial benefit compared to existing implementations. First of all, we propose an HMIMO communication system based on a pair of SIM at the transmitter (TX) and receiver (RX), respectively. In sharp contrast to the conventional MIMO designs, SIM is capable of automatically accomplishing transmit precoding and receiver combining, as the EM waves propagate through them. As such, each spatial stream can be directly radiated and recovered from the corresponding transmit and receive port. Secondly, we formulate the problem of minimizing the error between the actual end-to-end channel matrix and the target diagonal one, representing a flawless interference-free system of parallel subchannels. This is achieved by jointly optimizing the phase shifts associated with all the metasurface layers of both the TX-SIM and RX-SIM. We then design a gradient descent algorithm to solve the resultant non-convex problem. Furthermore, we theoretically analyze the HMIMO channel capacity bound and provide some fundamental insights. Finally, extensive simulation results are provided for characterizing our SIM-aided HMIMO system, which quantifies its substantial performance benefits, e.g., 150% capacity improvement over both conventional MIMO and its RIS-aided counterparts.

Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication systems is the concept of the holographic multiple-input multiple-output (HMIMO), which will actualize holographic radios with reasonable power consumption and fabrication cost. The HMIMO is facilitated by ultra-thin, extremely large, and nearly continuous surfaces that incorporate reconfigurable and sub-wavelength-spaced antennas and/or metamaterials. Such surfaces comprising dense electromagnetic (EM) excited elements are capable of recording and manipulating impinging fields with utmost flexibility and precision, as well as with reduced cost and power consumption, thereby shaping arbitrary-intended EM waves with high energy efficiency. The powerful EM processing capability of HMIMO opens up the possibility of wireless communications of holographic imaging level, paving the way for signal processing techniques realized in the EM-domain, possibly in conjunction with their digital-domain counterparts. However, in spite of the significant potential, the studies on HMIMO communications are still at an initial stage, its fundamental limits remain to be unveiled, and a certain number of critical technical challenges need to be addressed. In this survey, we present a comprehensive overview of the latest advances in the HMIMO communications paradigm, with a special focus on their physical aspects, their theoretical foundations, as well as the enabling technologies for HMIMO systems. We also compare the HMIMO with existing multi-antenna technologies, especially the massive MIMO, present various promising synergies of HMIMO with current and future candidate technologies, and provide an extensive list of research challenges and open directions for future HMIMO-empowered wireless applications.

Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of 5G-advanced and predominantly 6G mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operating modes. These include RISs with signal reception and processing units, sensors, amplification units, transmissive capability, multiple stacked components, and dynamic metasurface antennas (DMAs). Furthermore, we shed light on emerging RIS applications, such as index and reflection modulation, noncoherent modulation, next-generation multiple access (NGMA), integrated sensing and communications (ISAC), energy harvesting (EH), as well as aerial and vehicular networks. These exciting applications are set to transform the way we will wirelessly connect in the upcoming era of 6G. Finally, we review recent experimental RIS setups and present various open problems of the overviewed RIS hardware architectures and their applications. From enhancing network coverage to enabling new communication paradigms, RIS-empowered connectivity is poised to play a pivotal role in shaping the future of wireless networking. This article unveils the underlying principles and potential impacts of RISs, focusing on cutting-edge developments of this physical-layer smart connectivity technology.