Geometallurgy is an important addition to any evaluation project or mining operation. As an integrated approach, it establishes 3D models which enable the optimisation of net present value and effective orebody management, while minimising technical and operational risk to ultimately provide more resilient operations. Critically, through spatial identification of variability, it allows the development of strategies to mitigate the risks related to variability (e.g., collect additional data, revise the mine plan, adapt or change the process strategy, or engineer flexibility into the system). Geometallurgy promotes sustainable development when all stages of extraction are performed in an optimal manner from a technical, environmental, and social perspective. To achieve these goals, development of innovative technologies and approaches along the entire mine value chain are being established. Geometallurgy has been shown to intensify collaboration among operational stakeholders, creating an environment for sharing orebody knowledge and improving data acquisition and interpretation, leading to the integration of such data and knowledge into mine planning and scheduling. These aspects create better business optimisation and utilisation of staff, and lead to operations that are more resilient to both technical and non-technical variability. Geometallurgy encompasses activities that utilise improved understanding of the properties of ore and waste, which impact positively or negatively on the value of the product, concentrate, or metal. Properties not only include those that impact on processing efficiency, but also those of materials which will impact on other actions such as blasting and waste management. Companies that embrace the geometallurgical approach will benefit from increased net present value and shareholder value.
When developing a process flowsheet, the risks in achieving positive financial outcomes are minimised by ensuring representative metallurgical samples and high quality testwork. The quality and type of samples used are as important as the testwork itself. The key characteristic required of any set of samples is that they represent a given domain and quantify its variability. There are those who think that stating a sample(s) is representative makes it representative without justification. There is a need to consider both (1) in-situ and (2) testwork sub-sample representativity. Early ore/waste characterisation and domain definition are required, so that sampling and testwork protocols can be designed to suit the style of mineralisation in question. The Theory of Sampling (TOS) provides an insight into the causes and magnitude of errors that may occur during the sampling of particulate materials (e.g., broken rock) and is wholly applicable to metallurgical sampling. Quality assurance/quality control (QAQC) is critical throughout all programmes. Metallurgical sampling and testwork should be fully integrated into geometallurgical studies. Traditional metallurgical testwork is critical for plant design and is an inherent part of geometallurgy. In a geometallurgical study, multiple spatially distributed small-scale tests are used as proxies for process parameters. These will be validated against traditional testwork results. This paper focusses on sampling and testwork for gold recovery determination. It aims to provide the reader with the background to move towards the design, implementation and reporting of representative and fit-for-purpose sampling and testwork programmes. While the paper does not intend to provide a definitive commentary, it critically assesses the hard-rock sampling methods used and their optimal collection and preparation. The need for representative sampling and quality testwork to avoid financial and intangible losses is emphasised.
Clustering approaches are widely used to group similar objects and facilitate problem analysis and decision-making in many fields. During short-term planning of open-pit mines, clustering aims to aggregate similar blocks based on their attributes (e.g., geochemical grades, rock types, geometallurgical parameters) while honoring various constraints: i.e., cluster shapes, size, alignment with mining direction, destination, and rock type homogeneity. This approach helps to reduce the computational cost of optimizing short-term mine plans. Previous studies have presented ways to perform clustering without honoring constraints specific to mining. This paper presents a novel block clustering heuristic capable of considering and honoring a set of mining block aggregation requirements and constraints. Constraints can relate to the clustering adjacent blocks, achieving higher destination homogeneities, controlled cluster size, consistency with mining direction, and achieving clusters with mineable shapes and rock types’ homogeneity. The proposed algorithm’s application on two different datasets demonstrates its efficiency and capability in generating reasonable block clusters while meeting different predefined aggregation requirements and constraints.
As part of a study investigating the influence of mineralogical variability in a sediment hosted copper–cobalt deposit in the Democratic Republic of Congo on flotation performance, the flotation of nine sulphide ore samples was investigated through laboratory batch kinetics tests and quantitative mineral analyses. Using a range of ore samples from the same deposit the influence of mineralogy on flotation performance was studied. Characterisation of the samples through QEMSCAN showed that bornite, chalcopyrite, chalcocite and carrollite are the main copper-bearing sulphide minerals while carrollite is the only cobalt-bearing mineral. Mineralogical characteristics were averaged per sample to allow for a quantitative correlation with flotation performance parameters. Equilibrium recoveries, rate constants and final grades of the samples were correlated to the feed mineralogy through Multiple Linear Regression (MLR). Target sulphide minerals content and particle size, magnesiochlorite content, carrollite liberation and association of the copper and cobalt minerals with magnesiochlorite and dolomite were used to predict flotation performance. Leave One Out Cross Validation (LOOCV) revealed that the final copper and cobalt grades are predicted with an R2 of 0.80 and 0.93 and Root Mean Square Error of Cross Validation (RMSECV) of 4.41% and 1.34%. The recovery of cobalt and copper with time can be predicted with an R2 of 0.94 for both and an overall test error of 4.70% and 5.14%. Overall, it was shown that quantitative understanding of changes in mineralogy allows for prediction of changes in flotation performance.
Sheeted vein gold deposits are often characterised by multiple sub-parallel veins and free-milling coarse gold. Inherent mineralisation heterogeneity results in grade and process parameter variability, which increases project risk if not quantified. Measured grade variability is often exacerbated by poorly designed sampling and testwork protocols. Protocols that are optimised within the framework of the Theory of Sampling (TOS) to suit the ore type, together with quality assurance/quality control systems, will reduce variability and provide fit-for-purpose results. Geometallurgy can be broadly split into two key approaches: strategic and tactical (or operational). The strategic approach focuses on the whole orebody and long-term life-of-mine view, whereas tactical geometallurgy relates to a more short- to medium-term view during mining. The geometallurgical approach requires spatially distributed samples within a deposit to support variability modelling. Diverse attributes from core logging, mineralogical/textural determination and small-scale tests are used to measure variability. This contribution presents a case study that emphasises an early-stage strategic geometallurgical programme applied to a gravity recoverable gold (GRG) dominated deposit. It exemplifies how data can be acquired from a well-designed and planned programme to support resource estimation, a pre-feasibility study, trial mining and fast-track to production. A tactical geometallurgical programme is embedded into the mine operation.