O doce de leite, sobremesa láctea altamente consumida nos países latino americanos, é obtido a partir da evaporação da água do leite adicionado de açúcar. O tratamento térmico associado a evaporação desencadeia diversas alterações químicas que influenciam diretamente nas características do produto final. Apesar de possuir poucos ingredientes na sua formulação, o produto final pode apresentar características bem distintas dependendo das condições de processamento e dos atributos controlados. Diante disso, fica evidente que o conhecimento de temas como capacidade tamponante do leite, a utilização de reguladores de acidez na tecnologia de fabricação do doce, reação de Maillard e os principais fatores que afetam a sua ocorrência, reologia e textura, são de extrema importância na fabricação de doce de leite. O objetivo desse artigo é apresentar as principais reações químicas envolvidas no processamento do doce de leite e relacioná-las com as características obtidas no produto.
Doce de leite is a caramel-like confection, mainly produced in several Latin American countries, with increasing popularity worldwide. This overview outlines nine distinct industrial technologies for the production of doce de leite: (1) total batch manufacturing process; (2) batch manufacturing system with fractionated mix addition; (3) manufacturing with pre-concentration in a vacuum evaporator and finishing in an open pan; (4) manufacturing with pre-concentration in a vacuum evaporator, finishing in an open pan, and lactose micro-crystallization; (5) continuous flow manufacturing with total concentration in a vacuum evaporator and a viscosity control holding tank (hot well); (6) manufacturing with total concentration in a vacuum evaporator and sterilization in an autoclave system; (7) manufacturing with sucrose pre-caramelization and a total batch system; (8) manufacturing in colloidal mill without an evaporation process; and (9) manufacturing based of doce de leite bars with a sucrose crystallization stage. We conducted a literature review to gather data on the discussed processes and their principal characteristics, which may be pertinent to doce de leite manufacturers. The choice of a specific process will depend on the desired doce de leite characteristics, the type of doce de leite to be produced, and the manufacturing company’s requirements. When properly integrated, these technologies contribute to efficient and profitable production, yielding high-quality products with appropriate chemical, microbiological, and sensory characteristics at an industrial scale.
21 August 2021 in Research, Society and Development
The addition of buttermilk powder as partial fat replacer in yogurt formulations with constant dry matter was investigated. Three formulations of yogurt were produced containing 0% (T1), 1.36% w·w-1 (T2) and 3.34% w·w-1 (T3) of buttermilk powder in the final product. Particle size and pH variation were monitored during fermentation; scanning electron microscopy and texture profile analysis were performed in the final product. The control sample showed larger particle size on the day after production and at the end of fermentation, as well as a more compact network microstructure with a smaller average pore size. Compared to the prototypes with added buttermilk the control sample showed greater higher firmness. Buttermilk powder could act as fat replacer for yogurt but favors the formation of a less compacted network microstructure, with large pores, less springiness after 21 days, and less hardness in the two evaluated times (21 and 42 days).
23 October 2021 in Research, Society and Development
O objetivo deste trabalho foi estudar a influência da pressão de homogeneização upstream (antes do tratamento térmico) na estabilidade do leite integral pasteurizado quando submetido ao teste do álcool, visando processamento UHT sem adição de estabilizantes. Quatro diferentes pressões de homogeneização (0 MPa, 20 MPa, 40 MPa e 80 MPa, além do tratamento controle) foram avaliadas em temperatura de 80°C (temperatura de homogeneização média utilizada nas indústrias de leite UHT), empregando dois métodos de observação do comportamento coloidal do leite após o teste do álcool (concentrações de etanol entre 72% (v/v) e 96% (v/v), em intervalos de 2% (v/v)): visualização direta e análise de distribuição do tamanho das partículas. Os resultados de LS demonstraram que o tratamento 0 MPa não apresentou diferença significativa (p>0,05) para valores de d10 até o álcool 86% (v/v), mostrando assim uma maior estabilidade quando comparado ao tratamento controle (estável ao álcool ≤ 82% (v/v)). Verificou-se que as estabilidades dos tratamentos controle, 20 MPa e 40 MPa foram mantidas até a concentração do álcool ≤ 80% (v/v) (p>0,05), comportamento distinto ao observado no tratamento 80 MPa que apresentou diferença estatística significativa (p<0,05) após adição do álcool ≥78% (v/v). Esses dados demonstraram que a homogeneização upstream aplicando pressões entre 20 MPa e 80 MPa teve influência negativa no teste do álcool. Sob a condições do estudo, a não adição dos estabilizadores não pode ser recomendada.
3 August 2021 in Research, Society and Development
The present preliminary study aims at the rapid quantitative determination of the major chemical elements in the ashes of raw milk samples, using energy dispersive X-ray fluorescence spectrometry. The precision of the method was satisfactory (variation coefficient ≤ 5%). The mean values (in mmol·kg-1) obtained from the analysis of 32 raw milk samples showed good agreement with data from the Brazilian and international literature: K (26.1 ± 4.6), Ca (33.8 ± 3.7), P (28.4 ± 2.7), Na (21 ± 3.3) and Mg (4.7 ± 0.5). Residual Cl concentration (19.0 ± 3.3 mmol·kg-1) was lower than expected due to incineration losses. The results suggest a good application potential of the method for other dairy products.
Doce de leite (DL) is a product originating in South America, particularly in countries such as Brazil, Argentina, and Uruguay. The product is widely used for direct consumption and industrial applications and can be added with thickening agents to modify its rheological properties. This study aimed to produce DL with the addition of three different components (skimmed milk powder—SMP, whey protein concentrate—WPC, and microparticulated whey protein—MWP) in two different concentrations (2.1 and 4.2%). The composition of the products aligned with Mercosur regulations, except for the fat content, where the result was slightly lower. The HMF (5-hydroxymethylfurfural) concentration in the samples was also determined, showing no statistically significant differences between products. The products with SMP showed a higher browning index and color saturation compared to WPC and MWP formulations. The addition of MWP increased the hardness (from 10.2 to 467.8 g), gumminess (from 8.2 to 362.1 g), and viscosity (from 6.7 to 18.3 Pa.s) of the DL compared to the control product (SMP). These findings suggest that adding MWP can modulate the rheological and textural characteristics of such products without significantly altering their proximate composition, offering an alternative to using thickeners in this type of product.