Jing-Jing Han

Dr. Jing-Jing Han


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GZGuan-Nan Zhou
Guan-Nan Zhou
TYTeng-Tian Yang
Teng-Tian Yang
ZSZe Sun
Ze Sun
HLHeng Li
Heng Li
YCYun Cheng
Yun Cheng
JHJing-Jing Han
Jing-Jing Han
The stability of a tunnel face and the rationality of its supporting structures are the guarantees for safe tunnel construction. This paper established a quantitative analysis model of tunnel face stability, obtained the calculation formula of the tunnel face stability coefficient based on the silo theory of surrounding rock, and then realized the quantitative description of stability of the tunnel face under the condition of a pipe roofing support, bolting support, grouting support and reserved core soil. Finally, a tunnel face stability discrimination and support optimization system was developed, its supporting effects were quantitatively evaluated, and the support measures were optimized based on a buried tunnel of Chongqing rail transit passing through the suburban expressway. The results show that the grouting support increased the stability coefficient by 103~412%, and its supporting effect is the most significant. The reinforcement with reserved core soil has the lowest cost. The tunnel face stability discrimination and support optimization system carries out a rapid judgment of tunnel face stability, and then provides a quantitative evaluation method for the assessment of the tunnel face. On-site monitoring indicates that the cumulative displacement gradually increased with monitoring time; the farther from the tunnel surface, the smaller the cumulative displacement. The cumulative displacement reached 34.50 mm before the optimization of the reinforcement scheme. The optimization scheme of pipe roofing support + reserved core soil + grouting support led to the gradual convergence of cumulative displacement. The final surface settlement displacement was reduced to 15.50 mm, which was about 44.93% of that before the optimization of reinforcement scheme, ensuring the safe construction of the buried tunnel. This research has a certain theoretical significance for the quantitative evaluation and analysis of the tunnel face stability of shallow buried tunnels.

15 March 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JHJing-Jing Han
Jing-Jing Han
WXWeiWei Xie
WeiWei Xie
WZWei Zhang
Wei Zhang
LYLuFeng Yang
LuFeng Yang
Traditional damage analysis of steel truss structures requires detailed finite element meshing, and there is a coupling between stress-strain and damage solving, resulting in complex damage analysis and massive computations. In this paper, the element bearing ratio (EBR) reflecting the bearing state of components was defined, and the concept of the element damage factor was introduced based on the principle of deformation energy conservation. A homogeneous generalized yield function (HGYF) for box-section components was constructed to establish adaptive damage factors and the criterion under multi-force combinations. Combined with linear elastic iterative analysis, an adaptive damage evolution method for simulating steel truss structures with box section was proposed. Through numerical examples, the damage criterion in the method was able to adaptively determine whether component stiffness degradation occurred, eliminating the requirement to consider the interaction between stress-strain fields and damage, thereby reducing the difficulty of coupled calculations and enhancing computational efficiency in structural damage analysis. Based on the linear elastic iterative analysis, the calculated ultimate bearing capacity showed good agreement with experimental results.

23 October 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JHJing-Jing Han
Jing-Jing Han
WZWei Zhang
Wei Zhang
LYLuFeng Yang
LuFeng Yang
This study investigates the design methods for the overall stability capacity in equal-leg angles under axial compression and those subjected to eccentric compression with single-sided connections. It compares eight current codes from China, Europe, Australia, and the United States, emphasizing the differing design considerations for equal-leg angles. The research is based on 712 sets of axial compression tests and 226 sets of eccentric compression tests with single-sided connections on equal-leg angles, examining the discrepancies between the calculated and tested overall stability capacities as per the codes. The findings indicate significant variations in calculated capacities across the eight codes, with a general inclination towards conservatism in axial compression designs for equal-leg angles. Codes such as AS 4100, AS/NZS 4600, and the general method of EN 1993-1-1 use the axial compression-bending (N–M) interaction equation for eccentric compression, whereas GB 50,017, DL/T 5154, EN 1993-3-1, and the concise method of EN 1993-1-1 use a simplified axial compression formula for eccentric compression. These simplified methods deviate from practical engineering scenarios, especially for single-sided connected eccentric compression equal-leg angles. Following a comprehensive evaluation of the codes and test results, this study suggests a revision to the stability factor in GB 50,017 for axial compression in equal-leg angles. Additionally, it introduces a new design method for the overall stability capacity of single-sided connected eccentric compression in equal-leg angles, drawing on the N–M interaction equation from AS/NZS 4600. The paper concludes with the experimental data validation of the proposed stability factor for axial compression in equal-leg angles and the new design method for eccentric compression in equal-leg angles.