Electrochemical production of acid and base from water enables their use as regenerable reagents in closed-loop processes, with attractive applications including CO2 capture or mineralization and low-temperature production of Ca(OH)2. Conventional systems utilize ion exchange membranes (IEMs) to inhibit H+/OH– recombination, which leads to high resistive losses that compromise energy efficiency and poor tolerance for polyvalent metal ions that complicates applications involving mineral resources. Here we use ion transport modeling to guide the design of a system that uses a simple porous separator instead of IEMs. Using H2 redox reactions for H+/OH– production, we demonstrate acid-base production at useful concentrations in the presence of polyvalent impurities with lower energy demand and higher current density than reported IEM-based systems. Cells can be stacked by combining H2 electrodes into a bipolar gas diffusion electrode, which recirculates H2 with near-unity efficiency. We show that the cell outputs extract alkalinity from olivine and serpentine as Mg(OH)2 and Mg3Si2O6(OH)2, which remove CO2 from ambient air to form Mg carbonates. These studies establish the principles for membrane-free electrochemical acid-base production, enabling closed-loop resource recovery and material processing powered by renewable electricity.
The removal of CO2 from the atmosphere (CDR) on the multi-hundred gigaton (Gton) scale is essential for nearly all strategies to achieve net-zero greenhouse gas emissions and limit global warming to 2°C by 2100. CDR must capture CO2 from air and safely sequester it. Mg-rich silicate minerals have the capacity to remove ~10^5 Gton CO2 and sequester it in the form of stable and innocuous carbonate minerals or dissolved bicarbonate ions, but their reaction rates under ambient conditions are far too slow for practical and scalable CDR. Here we show that CaO reacts quantitatively with diverse Mg silicates (olivine, serpentine, augite) under thermochemical conditions to form Ca2SiO4 and MgO. Upon exposure to ambient air under wet conditions, Ca2SiO4 is quantitatively converted to CaCO3 and SiO2, and MgO is partially converted into a Mg carbonate within weeks, while the input Mg silicate shows no reactivity over 6 months. The mixture of Ca2SiO4, and MgO can also be completely carbonated to CaCO3 and Mg(HCO3)2 under 1 atm CO2 at ambient temperature within hours. By combining it with CaCO3 calcination to generate CaO, this chemistry enables a new process for CDR wherein the output Ca2SiO4/MgO material is used to remove CO2 from air or soil to form stable (bi)carbonates and the CO2 process emissions are sequestered. Analysis of the energy requirements indicates that this process could provide CDR at less than 1 MWh per ton CO2 removed, approximately half the energy required just to capture CO2 with leading direct air capture technologies. We also demonstrate analogous transformations using CaSO4 as the CaO source. The chemistry described here could unlock the use of Mg-rich silicates as a vast resource for safe, permanent, and verifiable CDR.
The electrochemical production of acid and base from water enables their use as regenerable reagents in closed-loop processes that drive chemical transformations by sequential acid and base addition. Such processes have attractive applications for industrial decarbonization including CO2 capture or mineralization and low-temperature production of Ca(OH)2. Conventional methods of electrochemical acid-base production utilize ion exchange membranes (IEMs) to inhibit proton (H+) and hydroxide (OH–) recombination, but these components lead to high resistive losses, low current densities, and poor tolerance for polyvalent metal ions, which compromise energy efficiency and complicate applications involving mineral resources. Here we use an ion transport model to guide the design of an electrochemical acid-base production system that inhibits recombination via competitive transport of the supporting electrolyte and masking H+ as HSO4–, which enables the use of a simple porous separator instead of IEMs. Using the H2 oxidation reaction (HOR) and H2 evolution reaction (HER) for H+ and OH– production, we demonstrate steady-state cogeneration of acid and base solutions at useful concentrations in the presence of polyvalent impurities with lower energy demand and higher current density than state-of-the-art reported IEM-based systems. Cells can be stacked by combining HER and HOR electrodes into a bipolar gas diffusion electrode, which recirculates H2 with near-unity efficiency. The acid and base outputs of the cell are capable of extracting alkalinity from olivine and serpentine in the form of Mg(OH)2 and Mg3Si2O6(OH)2, which can be used to remove CO2 from dilute streams, including ambient air, to form thermodynamically stable Mg carbonates. These studies establish the principles for membrane-free electrochemical acid-base production, enabling closed-loop resource recovery and material processing powered by renewable electricity.