Industrial wastewater treatment is essential to mitigate pollution and address global water scarcity. In this study, an activated carbon/copper (II) complex (AC/CuL) composite was obtained for enhanced removal of organic compounds by coupling adsorption and oxidation. Tests were performed using Drimaren Red X-6BN (DRX-6BN) and oily effluent at pH~6.0. Tests to obtain the adsorption kinetics of DRX-6BN (20 mg/L) were performed at 25 °C and using an amount of 0.42 g/200 mL of solution. The data were well fitted by several models, suggesting a complex adsorption process; however, the best fit was achieved by the pseudo-second-order (PSO) model (R2 = 0.9996). The adsorption data best fit the Freundlich model. The addition of hydrogen peroxide to the system reduced the need for adsorbent, removing approximately 100% of the chemical oxygen demand (COD) from the emulsion in 120 min using only 0.04 g of AC/CuL. The material exhibited high storage stability and maintained its effectiveness in removing oil and grease (O&G) content and COD for at least 12 months. These results indicate that AC/CuL is promising for the removal of complex organic compounds, such as that from the textile and petroleum industries. These findings offer a sustainable, economical, and safe approach for wastewater treatment.
26 June 2023 in International Journal of Environmental Science and Technology
Developing new non-noble metal electrocatalysts for oxygen reduction reaction (ORR) is an essential challenge in electrochemical device research. Among these, we highlight the metal Schiff-base complexes, which can be used as modified carbon paste electrodes (CPE). Herein, we present a facile one-pot method for preparing a new family of cobalt(II) complexes with Schiffbase ligands obtained from glycine and para-substituted aldehydes. Complexes were characterized by different techniques, and the effects of para-substituents on the electronic properties of the complexes were confirmed by ultraviolet-visible spectroscopy and cyclic voltammetry (CV). The CV was also used to evaluate the ORR behavior of metal complex-modified CPE in an alkaline medium. The three complex-modified CPE were found to be highly effective for ORR, and the electron-withdrawing character of para-substituent affects the electrochemical reactivity. Density functional theory (DFT) calculations were used to complement the study and correlate the electrochemical activity, the redox potentials, and the Hammett parameter (σp) with the singly occupied molecular orbital (SOMO) energy of the complexes. DFT data were also able to shed light on the likely ORR mechanism. In summary, electronic tuning of the ligand affects the electronic properties of the metal center and allows for systematic oxygen reduction-catalytic control.
This study reports the development of polyvinylidene fluoride (PVDF) membranes decorated with a copper(II) complex (CuL) for the removal of organic pollutants from wastewater. Using Drimaren Red X-6BN (DRX-6BN) as a probe, the PVDF membrane with the lowest CuL loading (PVDF/PDA/CuL-4) reached an adsorption capacity of 19.78 mg/g at 300 min, with removal of up to 50% DRX-6BN. Kinetic analysis favored Elovich (R2 > 0.9928; RMSE < 0.4489) and the pseudo-second-order model (R2 > 0.9540; RMSE < 1.1388), consistent with chemisorption. Intraparticle diffusion occurred in two steps. In the presence of 20 mg/L of hydrogen peroxide (H2O2), the removal was >80% within 180 min at higher CuL loadings (PVDF/PDA/CuL-40). In oily wastewater, PVDF/PDA/CuL-4 achieved ~100% COD removal in 120 min with H2O2, whereas pristine PVDF achieved 38.5%. Storage stability tests demonstrated the preservation of catalytic and separation performance for at least three months. All tests were conducted at pH ≈ 6.0 and a temperature of 25 °C. In contrast to many catalytic membranes, these membranes operate at near-neutral pH and ambient temperature in the absence of radiation. The results highlight PVDF membranes decorated with CuL as a robust and sustainable approach for the treatment of oily effluents, particularly by combining Fenton-like processes under mild conditions.
15 September 2026 in International Journal of Environmental Science and Technology
Conventional Fenton processes are effective for degrading recalcitrant contaminants; however, they are hindered by their requirement for strongly acidic conditions and the generation of large amounts of iron-containing sludge. To overcome these limitations, an iron(III) Schiff base complex (FeL) was synthesized, characterized, and evaluated as a Fenton-like catalyst active at near-neutral pH for the degradation of a model organic contaminant, Drimaren Red X-6BN (DRX-6BN), under dark conditions. The reaction parameters were systematically examined, and the degradation kinetics were interpreted using the Behnajady–Modirshahla–Ghanbery model. Under the best conditions (pH ~6.0, 1.17 × 10 –2 mol L −1 H 2 O 2 , 0.21–0.28 g L −1 FeL), approximately 85% removal was achieved without photoactivation. The catalyst retained 68% efficiency after seven consecutive cycles, indicating its capacity for reuse under oxidative conditions. Possible degradation pathways were discussed, and the performance was benchmarked against related Fenton-like systems, demonstrating competitive activity under milder operational conditions. These findings highlight the potential of FeL as a promising catalyst for Fenton-like oxidation under mild pH conditions, providing a basis for further investigations toward wastewater treatment applications.