Tyrosinase enzyme in a crude extract was immobilized in granular activated carbon (GAC) and activated chitosan beads (ACBs), two low-cost supports. It was possible to immobilize up to 70% of the enzymes in GAC under the conditions of 20 g/L support, stirring of 15.7 rad/s, contact time of 120 min, and up to 100% of enzymes in ACBs under the same conditions. In enzymatic oxidation tests, tyrosinase immobilized in GAC (T-GAC) was able to achieve a final phenol concentration below the limit required by the Brazilian legislation (0.5 mg/L) for solutions with initial concentrations of 10 mg/L, while the enzyme immobilized in ACBs (T-ACBs) was able to conform solutions with initial concentrations of phenol of 40 mg/L. It was possible to reuse the T-GAC two times, maintaining the same phenol removal efficiency, while the T-ACBs maintained up to 98% of its efficiency after five cycles of enzymatic oxidation of solutions of 10 mg/L phenol. It was possible to achieve the same phenol removal efficiency, with immobilized enzymes stored for up to 2 weeks. Such results suggest that both materials are effective for phenol removal from water samples, especially T-ACBs, representing promising alternatives for mitigating the effects of this compound in industrial wastewater.
Oil production entails the generation of large volumes of complex effluents that contain emulsified oil in water. Difficult to manage, the use of membrane separation processes (MSP) is an interesting option for the treatment of oily effluents, separating oil-in-water (o/w) emulsions with high efficiency. Modifying the surface of membranes with metals minimizes fouling, which is the main drawback of MSP. Through a survey of scientific papers and patent applications, this review demonstrates the technological development of membranes containing metals or metallic nanoparticles (MNP) for separating o/w emulsions. In total, 314 articles and 339 patent filings were retrieved by July 2023. The beginning of growth in the number of documents retrieved was more significant in 2018 for articles and in 2017 for patents. Asia was the largest highlight, with emphasis on China, which had 76.97% of the production of articles and 98.31% of patent applications on the continent, justified by investment in Research and Development (R&D). Metals, such as Fe, Zn, Cu, and Ti have been used to modify membranes and substrates. Polyvinylidene fluoride (PVDF), polyacrylonitrile (PAN), and polypropylene (PP) membranes and carbon-based primary substrates were used for their preparation. Advancements in membranes containing metals or MNP for the separation of o/w emulsions can have a positive impact on Sustainable Development Goals (SDG). This developing field anticipates increased involvement in nanotechnology, the development of systems that enable both the separation and oxidation of organic compounds, and a variety of methods or combinations of approaches to synthesize increasingly efficient membranes.
Industrial wastewater treatment is essential to mitigate pollution and address global water scarcity. In this study, an activated carbon/copper (II) complex (AC/CuL) composite was obtained for enhanced removal of organic compounds by coupling adsorption and oxidation. Tests were performed using Drimaren Red X-6BN (DRX-6BN) and oily effluent at pH~6.0. Tests to obtain the adsorption kinetics of DRX-6BN (20 mg/L) were performed at 25 °C and using an amount of 0.42 g/200 mL of solution. The data were well fitted by several models, suggesting a complex adsorption process; however, the best fit was achieved by the pseudo-second-order (PSO) model (R2 = 0.9996). The adsorption data best fit the Freundlich model. The addition of hydrogen peroxide to the system reduced the need for adsorbent, removing approximately 100% of the chemical oxygen demand (COD) from the emulsion in 120 min using only 0.04 g of AC/CuL. The material exhibited high storage stability and maintained its effectiveness in removing oil and grease (O&G) content and COD for at least 12 months. These results indicate that AC/CuL is promising for the removal of complex organic compounds, such as that from the textile and petroleum industries. These findings offer a sustainable, economical, and safe approach for wastewater treatment.
26 June 2023 in International Journal of Environmental Science and Technology
This study reports the development of polyvinylidene fluoride (PVDF) membranes decorated with a copper(II) complex (CuL) for the removal of organic pollutants from wastewater. Using Drimaren Red X-6BN (DRX-6BN) as a probe, the PVDF membrane with the lowest CuL loading (PVDF/PDA/CuL-4) reached an adsorption capacity of 19.78 mg/g at 300 min, with removal of up to 50% DRX-6BN. Kinetic analysis favored Elovich (R2 > 0.9928; RMSE < 0.4489) and the pseudo-second-order model (R2 > 0.9540; RMSE < 1.1388), consistent with chemisorption. Intraparticle diffusion occurred in two steps. In the presence of 20 mg/L of hydrogen peroxide (H2O2), the removal was >80% within 180 min at higher CuL loadings (PVDF/PDA/CuL-40). In oily wastewater, PVDF/PDA/CuL-4 achieved ~100% COD removal in 120 min with H2O2, whereas pristine PVDF achieved 38.5%. Storage stability tests demonstrated the preservation of catalytic and separation performance for at least three months. All tests were conducted at pH ≈ 6.0 and a temperature of 25 °C. In contrast to many catalytic membranes, these membranes operate at near-neutral pH and ambient temperature in the absence of radiation. The results highlight PVDF membranes decorated with CuL as a robust and sustainable approach for the treatment of oily effluents, particularly by combining Fenton-like processes under mild conditions.