Salt formations are commonly encountered during oil and gas drilling. Due to the rheological properties of salt rocks, casing collapse accidents happen frequently. Under action of nonuniform geostress, casing failure has become an important influencing factor that restricts the exploration and development benefits of deep and ultra-deep wells. Casing stress in a period after well cementation in the salt formation of Brazilian deepwater fields was analyzed. Results show that the nonuniform geostress is instantaneously applied on the cement sheath when well cementation is completed in the salt formation and then transferred to the casing. Stress on the inner wall grows with an increase in the angle with the direction of the maximum horizontal principal stress and it reaches the maximum in the direction of the minimum horizontal principal stress. As the creep continues, stress on the inner wall of casings gradually enlarges and the circumferential stress in inner rings tends to be uniform, which means that creep of the formation weakens the nonuniformity of casing deformation. The collapse pressure on the outer wall of casings tends to increase at first and then decrease as the angle with the direction of maximum horizontal principal stress enlarges. Stress on the inner wall of casings in the salt formation reduces with the increasing thickness of casings selected, and the casing strength is improved as the wall thickness increases. The research results provide certain theoretical guidance for the strength check of casings in well cementation engineering in salt formations.

The sensitivity of gas and water phases to DAS acoustic frequency bands can be used to interpret the production profile of horizontal wells. DAS typically collects acoustic signals in the kilohertz range, presenting a key challenge in identifying the sensitive frequency bands of the gas and water phases in the production well for accurate interpretation. In this study, a gas–water two-phase flow–acoustic coupling model for a horizontal well is developed by integrating a gas–water separation flow model with a pipeline acoustic model. The model simulates the sound pressure level (SPL) and amplitude variations of acoustic waves under different flow patterns, spatial locations, and gas–water ratio schemes. The results demonstrate that within the same flow pattern, an increase in the gas–water ratio significantly elevates acoustic amplitude and SPL peaks within the 5–50 Hz frequency band. Analysis of oil field DAS data reveals that the amplitude response range for stages with a lower gas–water ratio falls within 5–10 Hz, whereas stages with a higher gas–water ratio exhibit an amplitude response range of 10–50 Hz.

This study employed a full-scale cement sheath quality evaluation apparatus, along with a high-precision distributed fiber optic temperature sensing system, to perform real-time, continuous monitoring of the temperature change throughout the cement hydration process. The results of the cement annulus and cement bond defect monitoring during the hydration process indicated that the distributed fiber optic temperature data enabled centimeter-level resolution in defect identification. Defective regions exhibited significantly reduced temperature fluctuation amplitudes, and an inversion in temperature change at the early hydration stage, detected at the cement–defect boundary, facilitated the early detection of defect locations. The distributed fiber optic system was capable of conducting continuous and comprehensive monitoring of the sequential hydration temperature peaks of cement stages injected into the annulus. The results revealed the interdependence among different cement stages, as well as a phenomenon whereby an elevated annular temperature accelerates the progression of cement hydration. The experimental findings provide a reference for identifying the characteristic signals in distributed fiber optic monitoring of well-cementing operations, thereby establishing a foundation for the optimal and effective use of distributed fiber optics in assessing well-cementing quality.