This study investigated the multiple correlations among spectral simulation units based on digital micromirror device (DMD) spectral simulation, which leads to the problem that conventional spectral simulation methods such as PID control exhibit a low fitting accuracy or long fitting time in the spectral simulation of various targets. In this paper, a method of stellar spectrum simulation based on back propagation neural network-based PID (BP-PID) control is proposed to achieve high efficiency and high precision simulation of various spectral targets. The topology of the BP neural network was constructed based on the spectral modulation model of a DMD stellar spectrum simulation system, and the algorithm of the BP-PID control was designed. Finally, an experimental platform was built to verify the performance and spectral simulation accuracy of the BP-PID control algorithm. The results show that the overshoot and response time of the BP-PID control algorithm decreased by 79.01% and 30%, respectively compared with those of the PID control algorithm. The maximum spectral simulation accuracies of 2000K, 7000K, and 12000K color temperature increased by a factor of 2.311, 1.871, and 2.254, respectively, and the standard deviations of the spectral simulation error decreased by 56%, 41%, and 54%, respectively. In the range of 2000-12000K color temperature, the spectral simulation error of the BP-PID control algorithm is better than ±3.495%, and the standard deviation of the spectral simulation error is between 1.8255 and 2.2358. The proposed method can improve the spectral simulation accuracy and simulation efficiency of a star simulator, reduce the magnitude and spectrum calibration errors caused by the differential response, improve the star feature recognition accuracy of the orbiting star sensor, and hence, provide a theoretical and technical basis for the development of high-precision star sensors.
LED solar simulators currently face limitations in their spectral simulation capabilities, especially in terms of accurately incorporating AM0G and AM1.5G solar spectra. To this end, this study introduced a framework for an LED solar spectrum simulation algorithm that considers both AM0G and AM1.5G. This study examined the principle of solar spectrum discretization and reconstruction, established a foundation for analyzing the quality of solar spectrum reconstruction, and developed a non-dominated sorting genetic algorithm II (NSGA-II)-assisted long short-term memory (LSTM)-based solar spectrum simulation strategy. This strategy integrates a multi-objective genetic algorithm to generate training datasets and a neural network for solar spectrum simulation. A dataset generation method using the NSGA-II algorithm was implemented, which leveraged the 6500 K standard blackbody spectral curve, the spectral curve offset coefficients, and the spectral distributions of various narrowband LEDs. An LSTM-based neural network for solar spectrum simulation was developed, with the RMSE serving as the evaluation function. The analysis and selection of 29 narrowband LEDs produced 5000 solar spectrum simulation training datasets. The trained LSTM model achieved spectral matching accuracies within ±10.5% and ±9.3% for AM0G and AM1.5G, respectively, meeting the A+ level simulation standard for solar spectrum reconstruction considering AM0G and AM1.5G. These findings provide a theoretical foundation and technical advancements for high-precision solar spectrum reconstruction, which has practical implications for improving the efficiency and accuracy of solar energy systems, as well as supporting further research on solar spectrum utilization, and is expected to influence the development of more efficient solar simulators.
Stellar radiation simulation is critical in the space industry; however, with the current simulation methods, only a single color temperature and magnitude can be modulated at a time. Furthermore, star sensors rely on star observation tests for accurate calibration; this seriously restricts their development. This paper presents a novel star spectral information multi-partition mapping simulation method to closely simulate real sky star map information, thus replacing non-scenario-specific field stargazing experiments. First, using the stellar spectral simulation principle, a multi-partition mapping principle based on a digital micro-mirror device is proposed, and the theoretical basis of sub-region division is provided. Second, multi-component mapping simulation of stellar spectral information is expounded, and a general architecture for the same based on a double-prism symmetry structure is presented. Next, the influence of peak spectral half-peak width and peak interval on spectral simulation accuracy is analyzed, and a pre-collimated beam expansion system, multi-dimensional slit, and spectral splitting system are designed accordingly. Finally, a test platform is set up, and single-region simulation results and multi-region consistency experiments are conducted to verify the feasibility of the proposed method. Our method can realize high-precision simulation and independently control the output of various color temperatures and magnitudes. It provides a theoretical and technical basis for the development of star sensor ground calibration tests and space target detection light environment simulation.
High-precision measurements of direct solar radiation spectra are crucial for the development of solar resources, climate change research, and agricultural applications. However, the current measurement systems all rely on a moving two-axis tracking system with a complex structure and many error transmission links. In response to the above problems, a polar-axis rotating solar direct radiation spectroscopic measurement method is proposed, and an overall architecture consisting of a rotating reflector and a spectroradiometric measurement system is constructed, which simplifies the system’s structural form and enables year-round, full-latitude solar direct radiation spectroscopic measurements without requiring moving tracking. The paper focuses on the study of its optical system, optimizes the design of a polar-axis rotating solar direct radiation spectroscopy measurement optical system with a spectral range of 380–780 nm and a spectral resolution better than 2 nm, and carries out spectral reconstruction of the solar direct radiation spectra as well as the assessment of measurement accuracy. The results show that the point error distribution of the AM0 spectral curve ranges from −9.05% to 13.35%, and the area error distribution ranges from −0.04% to 0.09%; the point error distribution of the AM1.5G spectral curve ranges from −9.19% to 13.66%, and the area error distribution ranges from −0.03% to 0.11%. Both exhibit spatial and temporal uniformity exceeding 99.92%, ensuring excellent measurement performance throughout the year. The measurement method proposed in this study enhances the solar direct radiation spectral measurement system. Compared to the existing dual-axis moving tracking measurement method, the system composition is simplified, enabling direct solar radiation spectrum measurement at all latitudes throughout the year without the need for tracking, providing technical support for the development and application of new technologies for solar direct radiation measurement. It is expected to promote future theoretical research and technological breakthroughs in this field.
Existing stellar map simulators lack color temperature information, have a complex system structure, and cannot independently control the color temperature of stars. Therefore, this study developed an OLED-based semi-physical simulation method and a simulation algorithm for the stellar map with color temperature information to realize a semi-physical simulation of the stellar map close to the real situation in space. The study also aimed to independently control the color temperature of each star. The simulation effect of the stellar map with color temperature information was verified using four stellar maps. The developed simulator achieved independent and controllable color temperature information for each star in the stellar map.